hansgrohe 15384XXX RainSelect Thermostat Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe 15384XXX RainSelect Thermostat
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The product may only be used for bathing, hygienic and body cleaning purposes.
- Children as well as adults with physical, mental and/or sensoric impairments must not use this product without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this product.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
Technical Data
-
Operating pressure: max. 1 MPa
-
Recommended operating pressure: 0,1 – 0,5 MPa
-
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI) -
Hot water temperature: max. 60°C
-
Connections G 1/2: cold right – hot left
-
Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Safety Function
The desired maximum temperature for example max. 42º C can be pre-set thanks to the safety function.
Adjustment
After the installation, the output temperature of the thermostat must be checked. A correction is necessary if the temperature measured at the output differs from the temperature set on the thermostat.
Maintenance
- The check valves must be checked regularly according to EN 806-5 in accordance with national or regional regulations (at least once a year).
- To guarantee the smooth running of the thermostat, it is necessary from time to time to turn the thermostat from total hot to total cold.
Installation example
Hot and cold supplies are reversed
Dimensions
Spare parts (see page 50)
- XXX = Colors
- 000 = Chrome Plated
- 140 = Brushed Bronze
- 340 =Brushed Black Chrome
- 450 = White
- 610 = Black
- 670 = Matt Black
- 700 = Matt White
- 990 = Polished Gold-Optic
Cleaning
Setting the water volume
Operation
References
- Taps for bathrooms, showers and kitchens
- Banyo ve mutfak için musluk ve armatürler
- Banyo ve mutfak için musluk ve armatürler | hansgrohe TR
- Taps for bathrooms, showers and kitchens
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>