Darwin FB60 Weight Bench Instruction Manual
- June 12, 2024
- Darwin
Table of Contents
Darwin FB60 Weight Bench Instruction Manual
Dear customer,
Thank you for choosing Darwin fitness equipment. With Darwin fitness equipment
we offer first-class home sports equipment at a great price point. Darwin
exercise bikes and strength machines are easy to use, have a spacesaving
design and look really great. With our equipment we want to support you in
reaching your athletic goals, no matter if you want to lose weight or train
for the national triathlon.
If you have any further questions, please contact us, we are looking forward
to hearing from you and wish you lots of fun during your training!
Further information can be found at www.sport-tiedje.com
Intended Use
The equipment may only be used for its intended purpose.
The equipment is only suitable for home use. The equipment is not suitable for semi-professional (e.g. hospitals, associations, hotels, schools, etc.) and commercial or professional use (e.g. fitness studios).
Legal Notice
Sport-Tiedje GmbH
Europe’s No. 1 for home fitness
International Headquarters
Flensburger Straße 55
24837 Schleswig
Germany
Management:
Christian Grau
Sebastian Campmann
Dr. Bernhard Schenkel
No. HRB 1000 SL
Local Court Flensburg
European VAT Number: DE813211547
Disclaimer
©2016 Darwin® is a registered brand of the company SportTiedje GmbH. All rights reserved. Any use of this trademark without the explicit written permission of SportTiedje is prohibited.
Product and manual are subject to change. Technical data can be changed without advance notice.
ABOUT THIS MANUAL
Please carefully read the entire manual before installation and first use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance. In case of doubt, responsible persons must supervise the use of the equipment.
Due to ongoing changes and software optimisations, the manual may have to be updated. If you notice any discrepancies during assembly or use, please refer to the manual uploaded to the webshop. The latest manual is always available there.
This equipment has been manufactured according to the latest safety knowledge. As far as possible, potential safety hazards which could cause injury have been eliminated. Make sure to carefully follow the instructions and that all parts are securely in place. If required, read through the instructions again to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given
here.
The contract partner cannot be held liable for damage to health, accidents or
damage to the equipment when it is not used in accordance with these
instructions.
The following safety instructions may appear in this manual:
ATTENTION
This notice indicates potentially hazardous situations which, if not avoided,
may result in property damage.
CAUTION
This notice indicates potentially hazardous situations which, if not avoided,
may result in slight or minor injuries!
WARNING
This notice indicates potentially hazardous situations which, if not avoided,
may result in death or serious injuries!
DANGER
This notice indicates potentially hazardous situations which, if not avoided,
will result in death or serious injuries!
NOTICE
This notice indicates further useful information.
Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts.
GENERAL INFORMATION
Technical Data
Article weight (gross, incl. packaging) approx.: 25.5 kg
Article weight (net, excl. packaging) approx.: 21.6 kg
Package dimensions (L x W x H) approx.: 141 cm x 38 cm x 27 cm
Set-up dimensions (L x W x H) approx.: 180 cm x 59 cm x 124.5 cm
Maximum load (user + weights): 220 kg
Inclination angles of the backrest: -15° | 0° | 20°| 30° | 45° | 60° | 85°
Personal Safety
DANGER
- Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly affected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. If you are under medical treatment that affects your heart rate, medical advice is absolutely essential.
- Note that excessive training can seriously endanger your health. Please also note that heart rate monitoring systems can be inaccurate. If you notice any signs of weakness, nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising immediately and seek advice from your doctor if necessary.
WARNING
- This equipment may not be used by children under the age of 14.
- Children should not be allowed unsupervised access to the equipment.
- Persons with disabilities must have a medical license and must be under strict observation when using the equipment.
- The equipment is strictly for use by one person at a time.
- Keep your hands, feet and other body parts, hair, clothing, jewellery and other objects well clear of moving parts.
- During use, wear suitable sports clothing rather than loose or baggy clothing. When wearing sports shoes, make sure they have suitable soles, preferably made of rubber or other nonslip materials. Shoes with heels, leather soles, studs or spikes are unsuitable. Never exercise barefoot.
CAUTION
- Make sure that nobody is within the range of motion of the equipment during training so as not to endanger you or other persons.
- Do not insert any objects of any kind into the openings of the device.
Set-Up Place
WARNING
Do not place the equipment in main corridors or escape routes
CAUTION
- Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment.
- The training room should be well ventilated during training and not be exposed to any draughts.
- Choose the place in which to set up the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment.
- The set-up and mounting surface of the equipment should be flat, loadable and solid.
ATTENTION
- The device may only be used in one building, in sufficiently tempered and dry rooms (ambient temperatures between 10°C and 35°C). The equipment should not be used outdoors or in rooms with high humidity (over 70%) like swimming pools.
- A floor protective mat/equipment underlay can help to protect high-quality floor coverings (parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight unevenness.
ASSEMBLY
General Instructions
DANGER
Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly.
WARNING
Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries.
CAUTION
- Ensure to have sufficient room for movement in each direction during assembly.
- The assembly of the equipment must be carried out by at least two adults. If in doubt, seek the help of a third technically skilled person
ATTENTION
To prevent damage to the equipment and the floor, assemble the equipment on a mat or packaging board.
NOTICE
- In order to make the assembly as simple as possible, some screws and nuts to be used can already be pre-assembled.
- Ideally, assemble the equipment at its later set-up place.
Scope of Delivery
The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly.
CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must
not be carried out.
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given.
NOTICE
First loosely screw all parts together and check that they fit properly.
Tighten the screws using the tool only when you are instructed to do so.
Step 1: Assembly of the Front Base Frame and Front Stabilizer Frame
- Mount the front base frame (8) to the front stabilizer frame (5) using two carriage bolts (27), two arc washers (39), two spring washers (38) and two nuts (40).
- Tighten the nuts.
Step 2: Assembly of the Main Frame and Rear Base Frame
- Mount the rear base frame (10) to the main frame (1) using two carriage bolts (27), two arc washers (39), two spring washers (38) and two nuts (40).
- Tighten the bolts and nuts.
Step 3: Connecting the Frames
- Mount the main frame (1) to the front stabilizer frame (5) using four bolts (44) and four washers (34).
- Place the stabilizer rod (11) into the holders on the frames (1 & 5) and mount the rod (11) to the frames (1 & 5) using a total of two bolts (32), two washers (34) and two nuts (35).
- Tighten the bolts and nuts.
Step 4: Assembly of the Leg Extension Frame
- Mount the leg extension frame (22) to the front stabilizer frame (5) using one bolt (33), one washer (34), one nut (35) and the pin (28).
- Tighten the bolt and nut.
- Insert the foam rod (24) into one of the slots on the leg extension frame (22).
- Slide a foam (25) on each side of the foam rod (24) and fix the foam (25) with one foam cover cap (26).
Step 5: Assembly of the Leg Curl
- Mount the curl cushion rod (19) to the front adjustable frame (18) with four bolts (44) and four washers (34).
- Tighten the bolts
Step 6: Assembly of the Curl Cushions
- Mount the curl cushions (21) to the curl cushion rod (19) with a total of eight bolts (43), eight spring washers (42) and four washers (41).
- Tighten the bolts.
Step 7: Inserting the Adjustable Frame
- Loosen the knob (7) on the front stabilizer frame (5) and pull out the knob (7) slightly.
- Slide the front adjustable frame (18) into the housing of the front stabilizer frame (5) until you reach the desired height.
- Let the knob (7) snap into the front adjustable frame (18) and tighten the knob (7) again.
CAUTION
Make sure that the knob (7) is properly engaged and the adjustable frame (18)
is secured by the knob (7). Once the adjustable frame (18) has been properly
secured by the knob (7), the frame can no longer be adjusted in height.
STORAGE AND TRANSPORT
General Instructions
WARNING
- The storage location should be chosen so that improper use by third parties or children can be prevented.
- If your equipment does not have transportation wheels, the equipment must be disassembled before transportation.
ATTENTION
Make sure that the equipment is protected from moisture, dust and dirt in the selected storage location. The storage location should be dry and well ventilated and have a constant ambient temperature between 10°C and 35°C.
TROUBLESHOOTING, CARE AND MAINTENANCE
General Instructions
WARNING
Do not make any improper changes to the equipment.
CAUTION
Damaged or worn components may affect your safety and the life of the
equipment.
Therefore, immediately replace damaged or worn components. In such a case,
contact the contract partner. The equipment must not be used until it has been
repaired. If necessary, use only original spare parts.
ATTENTION
In addition to the instructions and recommendations for maintenance and care
given here, additional service and/or repair work may be necessary; this must
only be carried out by authorised service technicians.
Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an exchange is usually sufficient. Please refer to the following overview for the most common errors and how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault | Cause | Solution |
---|---|---|
Squeaking & cracking noises | Screw connections loosened or too tight | Check |
screw connections
Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session.
The following routine tasks must be performed at the specified intervals:
Part | Weekly | Monthly | Quarterly |
---|---|---|---|
Screw connections | I | ||
Cushions | C | I |
Legend: C = clean; I = inspect
DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in
normal household waste.
Instead, it must be disposed of via an recycling centre. Further information
can be obtained from your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling of materials or other forms of recovery of old equipment, you make an important contribution to the protection of the environment.
RECOMMENDED ACCESSORIES
To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. This could be a floor mat, for example, which makes your fitness equipment stand more securely and also protects the floor from falling sweat, but it could also be additional handrails on some treadmills or silicone spray to keep moving parts in good shape.
If you have purchased a fitness machine with pulse training and want to train your heart rate, we strongly recommend that you use a compatible chest strap, as this ensures optimum transmission of the heart rate. You may want to buy additional grips or weights for multi gyms.
Our range of accessories offers the highest quality and makes training even better. If you would like to find out more about compatible accessories, please go to the detail page of the product in our webshop (the easiest way is to enter the article number in the search field above) and go to the recommended accessories on this page. Alternatively, you can use the QR code provided. Of course, you can also contact our customer service: by telephone, e-mail, in one of our branches or via our social media channels. We will be happy to advise you!
ORDERING SPARE PARTS
Serial Number and Model Name
In order to provide you with the best possible service, please have the model name, article number, serial number, exploded drawing and parts list ready. The corresponding contact options can be found in chapter 9 of this operating manual.
NOTICE
The serial number of your equipment is unique. It’s located on a white
sticker. The exact position of this sticker is shown in the following
illustration.
Enter the serial number in the appropriate field.
Serial number:
Brand / Category:
Darwin / Weight bench
Model Name:
FB60
Article Number:
DF-FB60
Parts List
No. | Name | Qty. | No. | Name | Qty. |
---|---|---|---|---|---|
1 | MAIN FRAME | 1 | 24 | FOAM ROD | 1 |
2 | SEAT CUSHION | 1 | 25 | FOAM | 2 |
3 | END CAP 40x20MM | 4 | 26 | FOAM COVER CAP | 2 |
4 | BUFFER | 1 | 27 | CARRIAGE BOLT M8x60MM | 4 |
5 | FRONT STABILIZER FRAME | 1 | 28 | PIN M8x72.5MM | 1 |
6 | BUSHING | 1 | 29 | SHAFT Ø12*160 | 1 |
7 | KNOB | 1 | 30 | OUTSIDE ADJUSTABLE END CAP | 2 |
8 | FRONT BASE FRAME | 1 | 31 | BOLT M8X45MM | 4 |
9 | Φ50 OUTSIDE END CAP | 4 | 32 | BOLT M8x40MM | 6 |
10 | REAR BASE FRAME | 1 | 33 | BOLT M8X62MM | 1 |
11 | STABILIZER ROD | 1 | 34 | WASHER M8 | 19 |
12 | Φ22 END CAP | 2 | 35 | LOCKNUT M8 | 3 |
13 | BACKREST CUSHION FRAME | 2 | 36 | WASHER M12 | 4 |
14 | BACKREST CUSHION | 1 | 37 | LOCKNUT M12 | 2 |
15 | 30×30 END CAP | 4 | 38 | SPRING WASHER M8 | 8 |
16 | RAER ADJUSTABELE RACK | 1 | 39 | ARC WASHER M8 | 4 |
17 | Φ19 END CAP | 2 | 40 | LOCKNUT M8 | 4 |
18 | FRONT ADJUSTABLE FRAME | 1 | 41 | WASHER M6 | 8 |
19 | CURL CUSHION ROD | 1 | 42 | ARC WASHER M6 | 8 |
20 | Φ25 END CAP | 2 | 43 | SCREW M6 | 8 |
21 | CURL CUSHION | 2 | 44 | BOLT M8x20MM | 8 |
22 | LED EXTENSIN FRAME | 1 | 45 | 8MM ALLEN WRENCH | 1 |
23 | 38MM END CAP | 1 | 46 | OPEN-END FLAT WRENCH | 2 |
Exploded Drawing
WARRANTY
Training equipment from Taurus® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline.
Error Descriptions
Your fitness equipment is developed for long-term, high-quality training.
However, should a problem arise, please first read the operating instructions.
For further assistance, please contact your contract partner or call our
service hotline. To ensure your problem is solved as quickly as possible,
please describe the defect as exactly as possible.
In addition to the statutory warranty, we provide a warranty for every fitness equipment purchased from us according to the following provisions.
Your statutory rights are not affected.
Warrantee
The warrantee is the first/original buyer and/or any person who received a
newly purchased product as a gift from the original buyer.
Warranty period
The warranty periods, shown on our web shop, begin on delivery of the fitness
equipment. The respective warranty periods for your equipment can be found on
its product website.
Repair Costs
According to our choice, there will either be a repair, a replacement of
individual damaged parts or a complete replacement. Spare parts, that have to
be mounted while assembling the equipment, have to be replaced by the
warrantee personally and are not a part of repair. After the expiration of the
warranty period for repair costs, a pure parts warranty applies, which does
not include the repair, installation and delivery costs.
The terms of use are defined as follows:
- Home use: solely for private use in private households up to 3 hours per day
- Semi-professional use: up to 6 hours per day (e. g. rehabilitation centres, hotels, clubs, company gyms)
- Professional use: more than 6 hours per day (e. g. commercial gyms)
Warranty Service
Within the warranty period, equipment which develops faults as a result of
material or manufacturing defects, will be repaired or replaced at our
discretion. Ownership of equipment or parts of equipment which have been
replaced is transferred to us. The warranty period is not extended nor does a
new warranty period begin following repair or replacement under the warranty.
Warranty Conditions
For the warranty to be valid, the following steps must be taken:
Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance. If the fault is covered by our warranty, you will receive a new or repaired equipment in return
Warranty claims are invalid in case of damage resulting from:
- misuse or improper handling
- environmental influences (moisture, heat, electrical surge, dust, etc.)
- failure to follow the current safety measures for the equipment
- failure to follow the operating instructions
- use of force (e. g. hitting, kicking, falling)
- interventions which were not carried out by one of our authorized service centres
- unauthorised repair attempts
Proof of Purchase and Serial Number
Please make sure that you are able to provide the appropriate receipt when
claiming on your warranty. So that we can clearly identify the model of your
equipment, and for the purposes of our quality control, you will need to give
the serial number of your equipment, when contacting the service team. Where
possible please have your serial number and your customer number ready when
you call our service hotline. It will help us to deal with your request
swiftly.
If you cannot find the serial number on your fitness equipment, our service team is at your disposal to offer further information.
Service outside of the Warranty Period
We are also happy to issue an individual cost estimate if there is a problem
with your fitness equipment after the warranty has expired, or in cases which
do not fall under the terms of the warranty, e. g. normal wear and tear.
Please contact our customer service team to find a quick and cost-effective
solution to your problem. In such a case you will be responsible for the
delivery costs.
Communication
Many problems can be solved just by speaking to us as your specialist
supplier. We know how important it is to you as a user of the fitness
equipment to have problems solved quickly and simply, so you can enjoy working
out with minimal interruption. For that reason, we also want to resolve your
queries quickly and in a straightforward manner. Thus, please always keep your
customer number and the serial number of the faulty equipment handy.
CONTACT
TECHNICAL SUPPORT
+44 141 876 3986
support@powerhousefitness.co.uk
SERVICE
+44 141 876 3972
Mo – Fr 9am – 5pm
Please find a detailed overview including address and opening hours for all
stores of the Sport-Tiedje Group in Germany and abroad on the following
website:
www.sport-tiedje.com/en/stores
WE LIVE FITNESS
WEBSHOP AND SOCIAL MEDIA
Sport-Tiedje is Europe’s largest specialist store for home fitness equipment
with currently over 70 stores and one of the world’s most renowned online mail
order companies for fitness equipment. Private customers order via the 25 web
shops in the respective national language or have their desired equpiment
assembled on site. In addition, the company supplies fitness studios, hotels,
sports clubs, companies and physio practices with professional equipment for
endurance and strength training.
Sport-Tiedje offers a wide range of fitness equipment from renowned
manufacturers, high-quality in-house developments and comprehensive services,
such as a build-up service and sports scientific advice before and after the
purchase. The company employs numerous sports scientists, fitness trainers and
competitive athletes.
Visit us also on our social media platforms or our blog!
References
- Fitnessgeräte kaufen bei Fitshop.at - Europas Nr.1 für Heimfitness
- Køb træningsudstyr hos Fitshop - Europas nr. 1 inden for hjemmefitness
- tiedje.de has been registered
- Login • Instagram
- Purchase fitness equipment at Sport-Tiedje - Europe's No. 1 for home fitness
- Fitnessgeräte kaufen bei Sport-Tiedje - Europas Nr. 1 für Heimfitness
- Sport-Tiedje - Das Fitness Blog
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>