hansgrohe 26325000 Raindance Select S

Safety Notes

� Gloves should be worn during installation to prevent crushing and cutting injuries.
� The product may only be used for bathing, hygienic and body cleaning purposes.
� Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
� Shower hoses are only suitable for a connection from the shower to the fitting. Never fit a shut-off device between the fitting and the hose.
� Intended use of the handle: The handle is not a medical product, it is not intended for physically impaired persons, but only for general private use.
� Check the proper attachment and tight seating of the installed products periodically (annually).

Installation Instructions

• Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.

• The pipes and the fixture must be installed, flushed and tested as per the applicable standards.

• The plumbing codes applicable in the respective countries must be observed.

• Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete. For another wall constructions the manufacturer’s indications of the dowel manufacturer have to be taken into account.

• The premounted filter insert must be used to ensure a normal flow of the shower and to prevent dirt from entering through the pipes. Dirt entering can affect the function and/or lead to damages to the shower.
  Hansgrohe will not be held liable for this type of damage.

• Optimal functioning is only guaranteed with the combination of Hansgrohe hand showers and Hansgrohe shower hoses.

Technical Data

Operating pressure: max. 0,6 MPa
Recommended operating pressure: 0,1 – 0,4 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: max. 70°C / 4 min
The product is exclusively designed for drinking water!

Symbol description

• Do not use silicone containing acetic acid!

• Dimensions

• Flow diagram

• Installation example

•  Installation example DIN 18040

•  Operation

• Cleaning

•  Spare parts
  Special accessories (order as an extra)
  • tile-matching-disk Chrome Plated

  96380000

• Test certificate

• Assembly

  Dimensions

Unica Comfort
26324000 / 26324400

Unica Comfort
26326000 / 26326400

Unica Comfort
26403400

Unica Comfort
26404400

Flow diagram

Installation example

Installation example DIN 18040

Assembly

Operation

Cleaning recommendation

http://www.hansgrohe.com/cleaning-recommendation

http://www.hansgrohe.com/cleaning-recommendation

http://www.hansgrohe.com/cleaning-recommendation

http://www.hansgrohe.com/cleaning-recommendation

Just clean: simply rub over the spray nozzles to remove lime scale.

Spare parts

Special accessories

Test certificate

Others Models

Unica Comfort
26324000 / 26324400
26403400

Unica Comfort
26326000 / 26326400
26404400

Customer Support

Hansgrohe
Auestraße 5 – 9
D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440 44
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com

References

• Taps for bathrooms, showers and kitchens
• Taps for bathrooms, showers and kitchens

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>