southco P2-41 Flush Pull Instruction Manual

southco P2-41 Flush Pull

Product Information

The P2 Flush Pull is a product made of ABS plastic with a black finish. It is available in two sizes: small and large. The maximum static load for lifting/pulling is 1300 N (300 lbf) for the small size and 450 N (100 lbf) for the large size. The door thickness range for installation is between 1.0 mm (.040 inch) to 2.5 mm (.100 inch). The flammability rating is UL94-HB or UL94-V0.

Product Usage Instructions

1. Measure the door thickness to ensure it falls within the specified range of 1.0 mm (.040 inch) to 2.5 mm (.100 inch).
2. Select the appropriate part number based on the desired size, flammability rating, and lock style. Refer to the provided table for part number options.
3. If a lock core is desired, choose a part number that includes a lock core and specify the keying option (KA or KD). If a lock core is not needed, choose a part number without a lock core.
4. If a lock core is selected, refer to the provided table for the corresponding key code and bag quantity.
5. Install the P2 Flush Pull on the door by following the installation instructions provided in the complete user manual available at www.southco.com/P2.

Note: For pulls without a lock core, the lock core needs to be purchased separately. The cam for the lock is also sold separately. Refer to page 167 of the handbook or visit www.southco.com for more information.

Flush Pull

• Snap-in installation
• 2 sizes

Material and Finish

• ABS plastic, black

Performance Details

• Maximum static load:
• Lifting / pulling: 1300 N (300 lbf)
• Pushing / sliding: 450 N (100 lbf)
• Flammability rating: UL94-HB or UL94-V0
• Operating temperature range : -50°C (-60°F) to 60°C (140°F)

Notes
Performance details are based on installation in a 1.2 (.048) thick steel door. Maximum loads are limited by door strength.

Part Number Selection

Other options available. For complete details on variety, part numbers, installation and specification, go to

• www.southco.com/P2
• Dimensions in millimeters (inch) unless otherwise stated

DIMENSION

Flush Pull – Lockable

• Snap-in installation
• Lockable
• Lock core included or sold separately
• Cam sold separately

Material and Finish

• Pull: ABS plastic, black
• Lock parts: Zinc alloy, powder coated. Brass. Steel, zinc plated. Buna-N
• Flammability Rating UL94-HB or UL94-VO (See table)

Notes
For pulls without lock core, lock core sold separately, see page 158. Cam sold separately. See page 167.

Type B (Counter-Clockwise) Version Shown

• Cam Ordered Separately For Cam Part Numbers and options see our Handbook page 167 or www.southco.com

Part Number Selection

• page 183 or visit www.southco.com)

Dimensions in millimeters (inch) unless otherwise stated

PK Lock Cores

Lock Cores – Disc Tumbler

Lock Core Part Number

Keying| Key code| Bag qty| Shuttered stainless steel scalp| Non shuttered stainless steel scalp| Non shuttered black powder coated| Non shuttered chrome plated
KA| CH751| 1| PK-39-72-13-KCH751| PK-132-13| PK-115-13| PK-116-13
KA| RS001| 1| PK-39-72-13-RS001| PK-132-13-RS001| PK-29-15-13-RS001| PK-29-16-13-RS001
KD| 10 CODES| 10| PK-39-72-13-KD1010| PK-132-13-KD1010| PK-29-15-13-KD1010| PK-29-16-13-KD1010
KD| 50 CODES| 50| PK-39-72-13-KD1050| PK-132-13-KD1050| PK-29-15-13-KD1050| PK-29-16-13-KD1050
KD| 125 CODES| 125| PK-39-72-13-KD1125| PK-132-13-KD1125| PK-29-15-13-KD1125| PK-29-16-13-KD1125
MKKD| 10 CODES| 10| PK-39-72-13-MK1010| PK-132-13-MK1010| PK-29-15-13-MK1010| PK-29-16-13-MK1010
MKKD| 50 CODES| 50| PK-39-72-13-MK1050| PK-132-13-MK1050| PK-29-15-13-MK1050| PK-29-16-13-MK1050
MKKD| 125 CODES| 125| PK-39-72-13-MK1125| PK-132-13-MK1125| PK-29-15-13-MK1125| PK-29-16-13-MK1125
Keys| Part Number
---|---
Master Key (1)| PK-24-01
Control (Removal) Key (1)| PK-11-03
Keys| Part Number
---|---
CH751| PK-10-01
RS001| PK-10-01-RS001

Lock Cores – Tool Operable

Lock Core Installation for CM-3 and CM-6 only (see page 164)

Key code selection

• KA – Keyed Alike: All lock cores are the same key code
• KD – Keyed Differently: Multiple key codes provided in a non-master key system
• MKKD – Master Keyed, Keyed Differently: Multiple key codes provided in a master key system

Notes
Part Number includes 1 lock core and 2 keys

Installation Notes

1. Prepare panel and install the latches shown on page 164.
2. Latch should be in the unlatched position. The flats of the lock extender should be aligned with the flats on the housing.
3. Take a lock core and orient the brass wafers to the internal ramped area of the housing. Push the lock core into the housing until it stops.
4. Insert key into the lock core and turn to verify lock core is fully seated and operating properly.
5. Install cam.

CM Cam Locks

Cams & installation

Installation Notes

1. Place the sealing washer onto the housing (if included) and put through the mounting hole (see panel preparation).
2. Install the mounting nut and tighten to 5 N•m (44 in Ibf).
3. Install cam to assembly Properly orientate for rotation and grip.
4. Install screw. Tighten to 4 N•m (35 in Ibf).

Material and Finish
Cam: Steel plated

Part Number Selection

• See table
• Order lock and cam separately
• Cam part number (no lock)
• For Lock selection see pages 164-166
• Downloaded from Arrow.com.

References

• Latches and Access Hardware Solutions | Southco

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>