hansgrohe 10422180 Axor Starck Concealed Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe 10422180 Axor Starck Concealed
Product Information:
This product is a plumbing fitting used for connecting supply pipes and controlling the flow of water. It is available in different finishes and is compatible with various models such as Starck, Terrano, and Citterio.
Product Usage Instructions
- Flush through the supply pipes before installation.
- Connect the mixer to the pipework, ensuring equal pressure between hot and cold supplies. The connection pipes can be closed from either above or below. Use the delivered plugs to seal any non-required connecting angles.
- Install the diverter so that the bath spout outlet points downwardly (marked by the symbol).
- The valves can be opened or closed using the operating handle.
- Ensure a depth of fitting between 70 mm to 95 mm.
- For final assembly, use the appropriate finish set for your model (Starck, Terrano, or Citterio).
- If needed, refer to page 2 for spare parts and service information.
Note: It is important to follow the instructions carefully and avoid large pressure differences between hot and cold water supplies.
Assembly
-
Flush through the supply pipes.
-
Connect the mixer to the pipework. The connection pipes can be closed from either above or below. Plug the non required connecting angles with the delivered plugs.
Important!
The diverter must be installed so that the bath spout outlet points downwardly. This outlet is makred by the symbol .
Depth of fitting: 70 mm to 95 mm. -
The valves can be opend or closed with the operating handle.
Test certificate: WRAS -
The hot and cold supplies must be of equal pressures.
Final Assembly
- Finish set for Starck nr. 10423XXX
- Finish set for Terrano nr.
- 37423XXX
- 37425XXX
- Finish set for Citterio nr.
- 39425XXX
- 39428XXX
Spare parts
- shut off unit 94009000
DIMENSION
References
Read User Manual Online (PDF format)
Loading......