viessmann 1511 H0 Jukebox with LED Lighting Instruction Manual

: June 12, 2024
: VIESSMANN

Table of Contents

viessmann 1511 H0 Jukebox with LED Lighting
Product Information
Product Usage Instructions
Important information
Safety instructions
Introduction
Mounting
Connection
Warranty
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

viessmann 1511 H0 Jukebox with LED Lighting

Product Information

The H0 Jukebox with LED lighting is part of the 1511 series. It is a sound module designed for installation in model train layouts and dioramas. The product is compatible with Viessmann sound modules, which can be found on the website www.viessmann-modell.de. The H0 Jukebox with LED lighting is suitable for both DC and AC power supply.

Product Usage Instructions

Important information: Before using the product or installing it, please read the user manual attentively. Keep the manual as it is part of the product.
Safety instructions: Caution! There is a risk of injury and electric shock. Please follow all safety precautions.
Introduction: The eMotion series functional models bring life to your model train layout. They include a drive unit and/or an electronic control module that generates realistic lighting effects or movements.
Mounting
Drill a hole with a diameter of 12 mm at the desired mounting spot.
Insert the connection cables into the hole from the top.
Slide the cylinder with the drive unit/control module into the hole, ensuring it rests on the upper edge.
Connection: Connect the model as shown in Figure 2. Use an ordinary switch, such as item 5550, to turn the model on and off. Ensure that the functional model is not left unattended while it is switched on, and turn it off when not in use.
Warranty: Information about the warranty is not provided in the user manual.
Technical data:
- Connections: yellow, brown, 2 x black
- Power supply: 0 V (Lichttransformator 5200)
- Triggering of the sound module: 16 V (e.g. 5200)
- Operating voltage: <100 mA
- Operating current: <30 mA analog
- Standby current: 39 mm
- System: 3
- Length of drive unit: 5

Note: Dispose of this product through recycling instead of domestic waste. For the latest version of the manual, visit the Viessmann website using the item number provided.

Important information

Please read this manual completely and attentively before using the product for the first time. Keep this manual. It is part of the product.

Safety instructions

Caution:

Risk of injury!
Due to the detailed reproduction of the original and the intended use, this product can have peaks, edges and breakable parts. Tools are required for installation.

Electrical hazard!

Never put the connecting wires into a power socket! Regularly examine the transformer for damage. In case of any damage, do not use the transformer.
Make sure that the power supply is switched off when you mount the device and connect the cables!
Only use VDE/EN-tested special model train transformers for the power supply!
The power sources must be protected to prevent the risk of burning cables.
The drive unit in the cylinder, if existing, as well as the electronic control unit connected to the model must not be opened, damaged or get in contact with moisture.
This is necessary for the perfect operation of the model.

Using the product for its correct purpose

This product is intended:
For installation in model train layouts and dioramas.
For connection to an authorized model train transformer (e. g. Viessmann item 5200).
For use in dry rooms only.
Using the product for any other purpose is not approved and is considered inappropriate.
The manufacturer is not responsible for any damage resulting from the improper use of this product.

Checking the package contents

Check the contents of the package for completeness:
Functional model of the eMotion series
Retaining ring
Manual

Introduction

The functional models of the eMotion series provide life on your model train layout.
The model contains a drive unit and/or an electronic control module, which generates realistic lighting effects or movements.
This model is equipped with two black cables to connect the product to a Viessmann sound module.

Mounting

Drill a hole of 12 mm diameter at the mounting spot (fig. 1).
Insert the connection cables into the hole from top.
Put the cables with the electronic control module from above through the hole and slide the cylinder with the drive unit/control module into the hole until it is located on the upper edge (fig. 1).
Fix the model to the baseboard with the enclosed ring. Slide the ring over the drive unit until it is fixed. Turn the ring by 90° to lock it.

viessmann-1511-H0-Jukebox-with-LED-Lighting-FIG-1

Connection

Connect the model as shown in fig. 2.
Simply use an ordinary switch such as item 5550 for switch the model on and off (fig. 2).

viessmann-1511-H0-Jukebox-with-LED-Lighting-FIG-2

Caution
Do not leave the functional model unattended while it is switched on. Turn the functional model off when not needed.

Warranty

Each model is tested as to its full functionality prior to delivery. The warranty period is 2 years starting on the date of purchase. Should a fault occur during this period please contact our service department (service @viessmann-modell.com). Please send the item to the Viessmann service department for check and repair only after consultation. If we find a material or production fault to be the cause of the failure the item will be repaired free of charge or replaced. Expressively excluded from any warranty claims and liability are damages of the item and consequential damages due to inappropriate handling, disregarding the instructions of this manual, inappropriate use of the model, unauthorized disassembling, construction modifications and use of force, overheating and similar.