Polisport groovy Rear Child Seat for Bicycle Instruction Manual

Rear Child Seat for Bicycle
Instruction Manual

Rear Child-Seat for Bicycle

FRAME MOUNTING SYSTEM REAR CHILD SEAT FOR BICYCLE frame mounting system WWW.POLISPORT.COM

ICONS INDEX

Failure to comply with these operating instructions can lead to serious injury or death of the bicycle operator and/or child. Polisport is not liable for any damage to the product or persons resulting from improper installation, storage, or assembly (noncompliance with assembly instructions), improper maintenance, misuse or use not in compliance with the technical or use specifications (noncompliance with maintenance and care instructions), modifications or repairs made by you or a third party.
OK! CORRECT ASSEMBLY
NOT OK ! FORBIDDEN

PRODUCT INDEX

****ASSEMBLY INSTRUCTIONS

Read the manual carefully for a correct and safe assembly. The image sequence does not dispense the integral reading of the text. HOW TO REMOVE YOUR CHILD BICYCLE SEAT WARRANTY
STAMP AND SIGNATURE OF POLISPORDEALER / COPY OF RECEIPT

REAR CHILD-SEAT FOR BICYCLE FRAME MOUNTING SYSTEM

For child safety and for your peace of mind, Polisport has developed the perfect child carrying solution that’s suitable for a wide range of adult bicycles.
Our ergonomic child seats are all built with safety and comfort as the primary goals.
In this manual you will find information on attaching the child bicycle seat to the frame of your bicycle.
Carefully read the manual for a safe and correct installation of the child bicycle seat.

TECHNICAL FEATURES

• This child bicycle seat must not be mounted to bicycles fitted with rear shock absorbers.
• This child bicycle seat must not be mounted to a racing bicycle with drop handlebar.
• This child bicycle seat must not be mounted to Motorized Vehicles such as Mopeds and Scooters
• This child bicycle seat must not be mounted in bicycles with triangular, square or carbon fiber frames
• This child bicycle seat must be assembled on bicycles with round and oval frames with diameters ranging from Ø28 to Ø40 mm
• The child bicycle seat must be assembled on bicycles with wheels with diameters of 26” and 28”.
•  This child bicycle seat is only suitable for carrying children with a maximum weight of 22 Kg (and children with recommended ages ranging from 9 months to 5 years of age – with the weight as the decisive variable). Check the child’s weight before using the child bicycle seat. Under no circumstances should you use the child bicycle seat to transport a child whose weight is above the permissible limit.
• Make sure that the weight and size of the child do not exceed the maximum capacity of the seat, check it regularly and from time to time.
• If you have any doubts on fitting the child bicycle seat to your bicycle, please contact your bicycle supplier for further information.

TABLE OF CONTENTS OF PRODUCT

A. Main seat
B. Safety belt
B1. Safety lock
B2. Belt adjuster
C. Safety belt for bicycle frame
D. Footrest strap
E. Footrest
E1. Footrest protection
F. Centre of Gravity
G. Cushion
H. Metallic bracket
I. Mounting block
I1. Screws M8x45
I2. Plastic mounting block| I3. Release button
I4. Metallic mounting plate
I5. Allen key no. 5
I6. Lock washer M8
I7. Safety device indicator
I8. Protective rubber
J. Metallic mounting Kit
J1. Metallic mounting plate
J2. M8x25 screw
J3. M8 washer
J4. M8 nut
J5. Spanner No. 13
J6. Metal bracket attachment par
K. Batch serial number
---|---

ASSEMBLY INSTRUCTIONS

1. Remove the footrest protection and tools from the bag. Cut the plastic straps that hold the mounting block (I).

2. Turn the child seat upside down as shown in the image..

3. Use the spanner (J5) to unscrew and remove the metallic mounting plate (J1).

4. Remove the attachment part of the metal bracket (J6) and set aside for later use.

5. Disengage and remove the metal bracket (H) from the child seat, pulling it upwards.

6. Hold the metallic bracket (H) the same as in the picture and pass it through the opening in the child bicycle seat.

7. In order to adjust the child bicycle seat according to the bicycle size, set the metallic bracket (H) into one of the three allowed positions to move the seat backward or forward. At the beggining we suggest to place it on the position No. 3.

8. Place the attachment part for the metal bracket (J6).

9. Insert the metallic mounting plate (J1) on the grooves of the child bicycle seat, and close it as indicated in the picture.

10. While firmly securing the mounting set, lift the cushion (G) and firmly grasp the M8 screw (J2), pushing it down.

11. Place the nut (J4) on the screw (J2). Next hand tight it well with the spanner (J5). Tighten it to ensure that the metal bracket (H) is totally secure. This step is extremely important for the child’s safety.

12. Clip the footrest protection (E1) onto the child seat (A). Make sure that they are correctly positioned. This step is extremely important for the child’s safety.

13. Remove the screws (I1) on the mounting block (I), with the Allen key no. 5 (I5).

14. Before placing the block onto the frame, make sure that the protective rubber (I8) is correctly positioned on front of the block.

15. Place the main body of the mounting block (I2) on the front of the bicycle frame, and then place the metallic mounting plate (I4). Note: If they are cables in this area make sure that they are correctly ositioned in the central groove of the metallic plate (between the protective rubber (I8) and the groove of the mounting plate (I4) and are able to move freely).

16. Place the washer (I6) in the M8 screws (I1), and then screw them on to the mounting block (I). Tighten the screws, with the Key (I5), so that the mounting block (I) is secured but not fully tightened so that, if necessary, you can adjust the height later. However, note that it should be tight to make it easier to complete the next step. You need to tighten the 4 screws diagonally and in stages.

17. Place the edges of the metallic bracket (H) at the holes of the mounting block (I) until you hear a click indicating the lock, and until the 2 green safety device indicators pop up on the front of the mounting block. The child bicycle seat will only be properly installed when the 2 green safety device indicators are visible. This step is extremely important for the child’s safety.

18. Centre and adjust the metallic bracket (H) at a height above the rear wheel, so that later, when you add the weight of the child, the child bicycle seat does not touch the wheel. Note that the metallic bracket (H) should be positioned at a maximum of 10 cm away from the wheel. The child seat has a center of gravity (F) (engraved on the child seat) that must be positioned in front of the rear wheel axle. If it is positioned behind the axle, the distance must not exceed 10 cm. If the center of gravity is at a upper distance from the axle, adjust the metal bracket to one of the available positions. Special care must also be taken when positioning the child seat to ensure that the cyclist does not touch the child seat with his feet when cycling.
    Note: In Germany, according to the German Traffic Law StVZO, bicycle seats may only be fixed so that 2/3 of the seat depth or the Gravity Center of the seat is located between the front and rear axle of the bicycle.

19. After adjusting the height and positioning of the seat, hand tighten the mounting block (I) to ensure that it cannot move. This tightening must be manual and is extremely important for the safety of the child. Make sure that the mounting block (I) is firmly attached. You need to hand tight the 4 screws diagonally, with the same force and in stages.

20. Pass the safety belt (C) around the bicycle frame. Adjust it as shown in the picture, under tension. Make sure that remain loosen belt is not in contact with the wheel. This step is extremely important for the child’s safety.

21. To place the child in the seat, first fully extend the belt straps (B), sliding the adjusters (B2). This makes it easier to put the helmet when the child is in the seat. Do the same for the other side.

22. To put the child in the seat, open the lock (B1) of the safety belt (B) pressing the three buttons of the lock (B1) as indicated. Before starting your ride, make sure the seat belt is properly adjusted and that it does not hurt the child. This adjustment is made by sliding the belt adjustors (B2).

23. To adjust the height of the footrest (E) to fit your child, release the footrest (E) from the seat (A) by pressing the two fasteners together and lift the footrest as indicated in the picture (it may be necessary to apply some pressure to the fasteners).

24. To reattach the foot rests, first engage the top pin, and push the footrest (E) down to lock the clips into the slots holes.

25. To guarantee your child’s safety, adjust the strap (D) of the footrest. Unlock the strap (D) and adjust it to the child’s foot. Lock it again making sure the strap does not hurt the child.

26. Make sure you have followed and fulfilled all the instructions given. When done so, the child bicycle seat is ready for use. IT IS MANDATORY TO READ the following chapter on safety instructions about using your child bicycle seat.

SAFETY INSTRUCTIONS AND WARNINGS

• The rider must be at least 16 years of age; Check legislation and national regulations pertaining to this.
• This child bicycle seat must not be mounted to bicycles fitted with rear shock absorbers.
• This child bicycle seat must not be mounted to a racing bicycle with drop handlebar.
• This child bicycle seat must not be mounted to Motorized Vehicles such as Mopeds and Scooters
• This child bicycle seat must not be mounted in bicycles with triangular, square or carbon fiber frames
• This child bicycle seat must be assembled on bicycles with round and oval frames with diameters ranging from Ø28 to Ø40 mm
• The child bicycle seat must be assembled on bicycles with wheels with diameters of 26” and 28”.
• This child bicycle seat is only suitable for carrying children with a maximum weight of 22 Kg (and children with recommended ages ranging from 9 months to 5 years of age – with the weight as the decisive variable). Check the child’s weight before using the child bicycle seat. Under no circumstances should you use the child bicycle seat to transport a child whose weight is above the permissible limit.
• Make sure that the weight and size of the child do not exceed the maximum capacity of the seat, check it regularly and from time to time.
• Do not carry a child less than 9 months of age in this child bicycle seat. To be a passenger, the child must be able to sit up straight with the head held upright while wearing a bicycle helmet. A doctor should be consulted if the child’s growth is questionable.
• Check if all parts of the bicycle function correctly with the child bicycle seat mounted.
• Secure the child into child bicycle seat ensuring that all the safety belts and straps applied firmly but not so tight as to cause discomfort to the child.
• The child bicycle seat must never be used before adjusting the safety belt.
• Do not allow any part of the child’s body or clothing, shoelaces, child bicycle seat belts, etc. to come in contact with moving parts of the bicycle because can be harmful to the child or cause accidents.
• A wheel protector is recommended to prevent the child from inserting its feet or hands between the spokes. The use of protection underneath the saddle or the use of a saddle with internal springs is mandatory. Make certain that the child is not able to hinder the brakes, thus avoiding accidents. These adjustments should be revised with child´s growth.
• Dress the child with proper clothes according to weather conditions and use an appropriate helmet.
• Children in child seats need to be more warmly dressed than riders of cycles and should be protected from rain.
• When the child bicycle seat is not in use, fasten the waist buckle of the security harness to prevent the straps from dangling and entering in contact with some turning part of the bicycle as wheels, brakes, etc. as these may be a hazard to the cyclist.
• The position of the child bicycle seat must be adjusted so that the bicycle rider does not touch the child bicycle seat with the feet when in motion.
• The weight of the rider and the child carried must never be more than the maximum load allowed for the bicycle. Check the bicycle instructions manual or check with the manufacturer to make sure if the bicycle supports this additional load.
• You must cover any sharp or pointy objects on the bicycle that may be reached by the child, in any situation.
• The seat and cushion can get hot if under the sun for a long time. Make sure that they are not too hot before seating the child.
• Check for any laws and regulations that might be in force in your country. Relating to the carrying of children in seats attached to cycles.
• Carry only children that are able to sit unaided for a longer period of time, at least as long as the intended cycle journey.
• It’s very important to adjust correctly the seat and its component parts for optimum comfort and safety of the child. It’s also important that the seat does not slope forwards, so that the child does not tend to slide out of it. It’s also important that the backrest slope backwards slightly.

WARNING: Additional security devices shall always be fastened.
WARNING: Do not attach additional luggage to the child carrier. If you carry additional luggage its weight must not exceed the bicycle’s carrying capacity and it must be carried in front of the rider.
WARNING: Do not modify the seat.
WARNING: The cycle may behave differently with a child in the seat particularly with regard to balance, steering and braking.
WARNING: Never leave the cycle parked with a child in the seat unattended.
WARNING: Remove the seat when transporting the bicycle by car (outside the car). Air turbulence might damage the seat or loosen its fastenings or other suspended elements, which could lead to an accident.
WARNING: It is extremely important to make sure that on the final part of the assembly you hand tighten the screws of the mounting block (I) to make sure that the metallic bracket (H) is totally secured and fastened correctly.
WARNING: Do not use the seat if any part is broken or damaged. Check the all components regularly and replace any when required. Check the maintainence chapter.

HOW TO REMOVE YOUR CHILD BICYCLE SEAT

Detach the safety-belt (C) in order to remove the child bicycle seat. Then press the release button (I3) on the mounting block (I) and at the same time pull the metallic bracket (H) up and back as shown in the image.

MAINTENANCE

To keep the child bicycle seat in good working condition and to prevent accidents we recommend the following:

• Check regularly the mounting system of the seat to the bicycle in order to make sure it is in perfect condition.
• Check all the components to see if they work properly. Do not use the seat if any of the components are damaged. Damaged components must be replaced. In order to replace them you need to visit your local authorized POLISPORT dealer in order to get the correct components for replacement. You can find them on the website: www.polisport.com.
• If you have suffered an accident with your bicycle and safety seat, we advise you to get a new safety seat. Even if there is no visible damage to the seat.
• Clean the seat with soap and water (do not use abrasive, corrosive or toxic products). Leave it to dry at room temperature.

WARRANTY

2-YEAR WARRANTY: All mechanical components against manufacturer defects only. Register your seat at www.polisport.com.

WARRANTY CLAIMS
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system modification, or used in any way not intended as described in this operating manual. In order to make sure you have all the required information to activate the warranty you need to keep the information that you have in your Batch Serial Number (K). You can also record here the info.
O.F
Date .

• The specifications and design are subject to change without notice.
  Please contact Polisport for any questions.
  ATTENTION
  OUR INSTRUCTIONS FOR USE MAY OCCASIONALLY BE UPDATED. PLEASE CHECK OUR WEBSITE PERIODICALLY FOR UPDATES.

POLISPORT PLÁSTICOS, S.A.
Av. Ferreira de Castro, 818
3720-024 Carregosa | Portugal
T +351 256 410 230
F +351 256 410 249
polisport@polisport.com 
WWW.POLISPORT.COM
MADE IN PORTUGAL | MAN0315

References

• Off-Road Motorcycle & Bicycle Parts & Accessories | Polisport

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>