JianYuanDa Mirror 63533 LED Makeup Mirror QI Wireless Charger Instruction Manual

JianYuanDa Mirror 63533 LED Makeup Mirror QI Wireless Charger Instruction Manual

How to charge the mirror?

1. Connect the micro USB port with a 5V/2A power supply or computer by the provided USB cable.
2. When we start charging, the indicator is red color. When the mirror is fully charged, the indicator light become blue color.
3. Before charging the mirror, please make sure the lights are off.

Instructions:

1. It takes around 4 hours to charge the mirror fully by using 5V/2A power supply. It takes more hours if use computer to charge the mirror.

How to use the mirror lights?

1. Touch the on/off switch to turn on or turn off the lights.
2. Long press the touch sensor on/off switch to adjust the brightness of lights.

USB charging port

How to charge the mirror?

1. Connect the micro USB port with 5V/2A power supply(adaptor excluded), the indicator light is red
   and QI wireless charger function starts to work.

2. The indicator will become blue color once it detect the QI wireless charge phones or other USB device.

3. The QI wireless charger function will turn off automatically in 20 seconds if it does not detect the phone or other device.

4. If we put non-QI wireless charge phone or USB device on the charging base, the indictor is green light flash.
   S. When we use the QI wireless charger function, make sure the phone in the middle of the charging base.

5. When we use the USB port to charge our phone or USB device, the micro USB port need to connect with power supply.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• * Reorient or relocate the receiving antenna.

  •  Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    FCC Radiation Exposure Statement
    The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>