Atomi AT1651 Bluetooth Shower Speaker Instruction Manual
- June 4, 2024
- atomi
Table of Contents
Atomi
Atomi AT1651 Bluetooth Shower Speaker
Specifications
- Brand: Atomi
- Suction cups: 4 Suction Cups
- Waterproof rating: IPX4
- Playtime: 6 Hours
Introduction
It is Speaker with IPX4 splash resistance (not submersible). It is 5W Shower Speaker With Integrated Microphone On-Speaker Playtime of Up to 6 Hours. It has Waterproof Phone Holder with IP64 (Silicon Seal Design Provides Waterproof Protection).
HOW TO USE
An enchanting sound will be heard if you press and hold the paver button for 5 seconds. announcing the speaker’s activation. Select Shower Speaker from your device’s Bluetooth 11 listings, or choose YES to pair your device. Use the controls on the device to set the desired volume after pressing play on your smartphone.
HOW TO SETUP ATOMI SMART
Get the Atomi sma app from Google Play or the App Store. Create an account by following the directions displayed on the screen. Select the sma device to install from the device list by pressing “Add Device” or the “+” symbol. Press “Go to Connect” and adhere to the on-screen directions.
HOW TO PAIR
- By holding down the Power or Pairing button, you can put your Bluetooth device in pairing mode.
- iPhone: Select Other devices under Bluetooth settings. To connect, tap the gadget.
- Go to Settings > Connected devices > Bluetooth on an Android device. After choosing Pair new device, tap the speaker’s name.
HOW TO CHARGE
The speaker has a rechargeable battery integrated into it. To charge, plug the included USB cord into a computer or a DC 5V power converter. The LED indication light on the speaker will become red as it charges. The red LED on the speaker will stop glowing when it is fully charged (the charging time is approximately 3 hours).
HOW TO RESET
Activate the Atomi Smart gadget. If the power light isn’t flashing, hold down the power button for ten seconds to restart.
Frequently Asked Questions
How long does it take to charge the Atomi shower speaker?
On the speaker’s rear is where the charger is situated. Charge using a computer or an AC adaptor with a USB jack and the USB to Micro USB connection that is included (not included). NOTE: Please give your device about 3 hours to fully charge.
Why is the shower speaker on my Atomi beeping?
Atomi. Several issues may be indicated by an Atomi speaker that beeps. The most frequent cause of its beeping, nevertheless, is a voltage supply that is either too low or too high compared to what is advised. Connect the speaker to a power source with the suggested voltage to solve this problem.
How do I get in touch with Atomi?
Get the Atomi sma app from Google Play or the App Store. Create an account by following the directions displayed on the screen. Select the sma device to install from the device list by pressing “Add Device” or the “+” symbol. Press “Go to Connect” and adhere to the on-screen directions.
My atomi lights won’t connect; why?
Ensure that the lights on your Atomi Smart device are blinking and that it is hooked in. If not, reboot your Atomi Smart device by unplugging it and then plugging it back in. Press and hold the power button for 10 seconds if the problem persists.
Why won’t my Bluetooth speaker connect?
The device’s own Bluetooth is typically either off or not in pairing mode when this happens. To find out how to activate pairing mode and make it discoverable, consult the user handbook. While some devices have a specific Bluetooth button, some headphones require you to keep the power button down longer.
Why won’t my Bluetooth speaker work?
If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.
Can I always have my Bluetooth speaker plugged in?
The battery will be harmed even if you leave the Bluetooth speaker connected the entire day. Even when the battery is fully charged, continuing to charge the speaker could cause the battery to overheat and perhaps explode.
Where can I find a charging port without one for my Bluetooth speaker?
Simply use your smartphone to charge the wireless speaker. All you have to do is attach your smartphone to it using the USB cord. You won’t need to worry about using a charger if you do it this way. You don’t need to buy anything more because you already carry a phone with you everywhere.
How can a non-charging Bluetooth speaker be fixed?
Installing software updates, replacing the battery, purchasing a new cable, repairing a fractured solder joint, replacing the charging port, and replacing the charging circuit are all necessary fixes for a Bluetooth speaker that won’t charge.
Why does my phone have Bluetooth connectivity but no sound?
Make sure the Media Audio setting is enabled if your Bluetooth headphones aren’t producing any sound. Connect your Bluetooth headphones, then click Bluetooth under Settings. From the list, choose your Bluetooth headphones. Ensure that Media Audio is ON on the following screen.
Why is my Bluetooth turned on yet my phone is still playing music?
Your PC presumably linked to headphones first, which is why this is happening. Sound should automatically resume after disconnecting the PC. If it doesn’t automatically, try repairing the headphone using the phone instead of taking it to a repair shop.
How are water speakers recharged?
Connect the included USB cable to the USB port on your Water Speaker to begin charging. 3. Join the USB cable’s other end to a 5V 1A USB wall charger or a USB port on your computer. The LED indicator on your Water Speaker will turn red while it is charging; a wall charger is not provided.
Can atomi lights be used without WiFi?
For the app to be able to control the lights, an internet connection is necessary. But even without an internet connection, you can still operate it manually by pressing the WiFi box’s power button.
How can I tell when the battery in my Bluetooth speaker is full?
If the battery is fully charged, the CHARGE indicator won’t turn on. Depending on the model, the speaker’s CHARGE indication could not turn on while it is being charged. The CHARGE indicator will turn on if the battery is charging while the speaker is off.
Why is the signal on my Bluetooth speaker busy?
More electricity is needed for Bluetooth to function. The Bluetooth connections will either fail or the speaker will play a busy signal sound when your audio device or the speaker has low power.