hansgrohe Talis M54 210 2jet 72800XXX Single Lever Kitchen Mixer Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
Instruction Manual
| |
---|---|---
Talis M54 210 2jet
72800XXX
Talis M54 210 Eco 2jet
72842XXX| Talis M54 210 1jet
72802XXX| Talis M54 270 1jet
72808XXX
Talis M54 270 Eco 1jet
72845XXX
Accepterad
monteringsanvisning
2021:1
Safety Notes
**** Gloves should be worn during installation to prevent crushing and cutting injuries.
**** The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
Technical Data
| Operating pressure: | max. 1 MPa |
|---|---|
| Recommended operating pressure: | 0,1 – 0,5 MPa |
| Test pressure: | 1,6 MPa |
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:| max. 60°C
Thermal disinfection:| 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment (see page 41)
To adjust the hot water limiter. Using a hot water limiter in combination with
a continuous flow water heater is not recommended.
Maintenance (see page 48)
The check valves must be checked regularly according to EN 806-5 in accordance
with national or regional regulations (at least once a year).
Dimensions (see page 42)
Flow diagram (see page 43)
Spare parts (see page 45)
XXX = Colors
000 = Chrome Plated
130 = Polished Bronze
340 = Brushed Black Chrome
670 = Matt Black
800 = Stainless Steel Optic
930 = Polished Brass
Special accessories (order as an extra)
Adapter (G⅜ / G½)
93395000 (see page 46)
Cleaning (see page 45)
Operation (see page 44)
Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
Test certificate (see page 48)
| Fault | Cause | Remedy |
|---|---|---|
| Mixer stiff | – Cartridge defective, calcified | – Exchange cartridge |
| Mixer dripping | – Cartridge defective | – Exchange cartridge |
| Water escaping in area of swivel spout | – 0-ring defective | – Exchange 0-ring |
| Water escaping at the threaded base | – connection hoses not completely screwed | |
| into basic body | – Tighten connection hoses by hand | |
| – 0-ring at the connection hose defective. | – Exchange 0-ring | |
| Hot water temperature too low | – Hot water limiter incorrectly set | – Set hot |
water limiter
Assembly
| 
---|---
| 
| 
| 
www.hansgrohe.com/cleaning-recommendation
Cleaning recommendation / Warranty / Contact
| 
---|---
| 
| 72800XXX P-IX 29737/IOO | DL0136 | X |
|---|---|---|
| 72802XXX P-IX 29738/IA | DL0136 | X |
| 72808XXX P-IX 29741/IO | DL0136 | X |
| 72842XXX P-IX 29743/IOO | DL0136 | X |
| 72845XXX P-IX 29745/IO | DL0136 | X |
Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78
36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com