SKC 225-9808 Lift Tape for Surface Sampling Instruction Manual
- June 12, 2024
- SKC
Table of Contents
SKC 225-9808 Lift Tape for Surface Sampling
Stick-to-it Lift Tape for Surface Sampling
Cat. Nos. 225-9808 and 225-9809
Product Information
The Stick-to-it Lift Tape for Surface Sampling, available in Cat. Nos. 225-9808 and 225-9809, is a specialized tape designed for collecting samples from surfaces for laboratory analysis. It features an adhesive side that securely attaches to the surface, allowing for the collection of particles or contaminants.
Operating Instructions
- Remove the slide from the slide mailer.
- Document the sample location and other required information for the laboratory.
- Peel off the protective liner from the slide to expose the adhesive. (Pull the liner from the top down for best results.)
- Place the slide adhesive side down on the surface to be sampled.
- Gently press down on the slide to ensure proper contact is made.
- Carefully remove the slide from the surface and place it back into the slide mailer.
- Send the slide to the laboratory for analysis.
SKC Limited Warranty and Return Policy
SKC products, including the Stick-to-it Lift Tape, are subject to the SKC Limited Warranty and Return Policy. This policy outlines SKC’s sole liability and provides the buyer’s exclusive remedy. For more information, please visit skcinc.com/warranty.
Form 40065 Rev 220707
References
- SKC, Inc. | Industrial Hygiene and Occupational Safety Products and Technology
- Warranty Information | Learn More About Industrial Hygiene & Occupational Safety Products at SKC, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>