maycar XC3752 DIY Game Console Instructions
- June 12, 2024
- maycar
Table of Contents
maycar XC3752 DIY Game Console
Product Information
The Maycar DIY Game Console is an Arduino-based 8-bit handheld game console that allows you to create your own games or play games developed by the ArduboyTM community. The kit includes various components to assemble the console, including a console circuit board, button caps, screws, copper pillars, insulating columns, a screwdriver, an acrylic case, and a USB cable.
About the Kit
The maycar DIY game console is an Arduino-based 8-bit handheld game console that you can use to create your very own games or enjoy the creations of others via the Arduboy™ community.
Components List:
- 1 x Console Circuit Board
- 6 x White/Blue caps
- 4 x M2*6mm round-headed screws
- 4 x M2*10mm round-headed screws
- 4 x M2.0*11mm dual-pass copper pillars
- 4 x White insulating column ABS
- 1 x 3*83mm black screwdriver
- 1 x Arduino game console acrylic case
- 1 x USB cable
Product Usage Instructions
Installation:
- Take out all the parts and lay them out on your desk.
- Fix the board and acrylic top board together with 4 M210mm round- head screws, 4 white insulating columns, and 4 M2.011mm dual-pass copper pillars.
- Install 6 button caps
- Fix the bottom acrylic board and the 4 M2.011mm dual-pass copper pillars together with 4 M26mm round-head screws.
- Make sure to align the holes of the acrylic bottom board with the potentiometer on the console while installing it.
Please Note: For any further assistance or inquiries, please contact Electus Distribution Pty. Ltd. at PO Box 3577 Rhodes NSW 2138, Australia or visit their website at www.electusdistribution.com.au.
Distributed by:
Electus Distribution Pty. Ltd. PO Box 3577 Rhodes
NSW 2138 Australia
www.electusdistribution.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>