YAMAHA YVC-1000 Extension Microphone YVC-MIC1000EX User Manual
- June 7, 2024
- Yamaha
Table of Contents
YVC-1000 Extension Microphone
YVC-MIC1000EX
User’s Manual
Please also refer to the YVC-1000 user’s manual. You can download the latest user’s manual from the following website: https://uc.yamaha.com/resources/support/
YVC-1000 https://sound-solution.yamaha.com/download/
https://www.yamaha.com/products/zh/communication/support/
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
- Explanation of Graphical Symbols
**The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
**The exclamation point within an equilateral triangle is intended to alert
you to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
FCC INFORMATION (U.S.A.)
-
IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. -
IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.
-
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Safety Precautions
-
Do not touch the terminals with your fingers or metal objects. Failure to observe this may result in electric shock or damage to the product.
-
Ensure the product does not fall or strongly impacted. The internal parts could break, which could then result in electric shock, fire, or damage to the product.
-
If the product has been damaged, request repair or inspection services from a dealer. Continued use of the product may result in fire or electric shock.
-
Do not disassemble or alter this product in any way. Failure to observe this could result in fire, electric shock, or damage to the product.
-
Do not obstruct heat dissipation.
– Do not place a cloth, tablecloth or other such object over the product.
– Do not place the product on top of a rug, carpet, etc.
- Do not wedge or squeeze the product into a narrow space that has poor air circulation.
– Do not block the ventilation holes. Allow ventilation space of at least 1 cm on the top, 1 cm on the left and right, and 5 cm on the back of this product. Failure to observe the above may result in heat being trapped inside the product and cause a fire or damage to the product. -
Do not place the product outdoors or in a location where water may drip on it. Failure to observe this may result in fire, electric shock or damage to the product.
-
Do not install the product anywhere it will be exposed to dust or humidity, oily smoke or steam, or corrosive gas. Failure to observe this could result in fire, electric shock, or damage to the product.
-
Ensure that the product is on the level. Do not place it upside down or in a vertical orientation. Failure to observe this may result in fire, electric shock or damage to the product.
-
Avoid installing the product where foreign object may fall onto the product and/or the product may be exposed to liquid dripping or splashing. On the top of the product, do not place:
• Other components, as they may cause damage and/or discoloration on the surface of the product.
• Burning objects (i.e. candles), as they may cause fire, damage to the product, and/or personal injury.
• Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to the product. -
Do not insert foreign objects such as metal or paper in the product. Failure to observe this may result in fire, electric shock or damage to the product.
-
If thunder is heard, avoid touching the product. Failure to observe this may result in electric shock.
-
The product should be used at least 22 cm away from persons using a pacemaker, defibrillator, or similar device. Failure to observe this may affect the pacemaker, resulting in a serious accident.
-
Do not use this product near medical equipment. Radio waves from this product may adversely affect the operation of electromedical equipment. Do not use this product in locations where use of radio waves is restricted, such as near medical equipment.
-
Avoid damaging the microphone cables.
• Do not place heavy objects on cables.
• Do not modify cables.
• Do not affix cables using staples.
• Do not apply unnecessary force to cables.
• Do not place cables near heat sources. Doing so may result in fire, electric shock or damage to the product. -
Be sure to use the microphone cable that come with the product. Using other microphone cables may result in fire, electric shock, or damage to the product.
-
Ensure your hands are dry when connecting or disconnecting the microphone or cables. Failure to observe this may result in electric shock or damage to the product.
-
Ensure not to install the product anywhere unstable or where it will be exposed to vibrations as it could fall over or turn upside down, thus resulting in injury or damage to the product.
-
Ensure not to install the product anywhere it will be exposed to direct sunlight or extraordinarily high temperatures (near a heater, etc.). Failure to observe this could result in damage to the product.
-
Do not sit/stand on the product or place other objects on top of it. Failure to observe this may result in damage to the product.
-
Ensure not to use the product anywhere it will be exposed to rapid changes in the ambient temperature. Any rapid change in the ambient temperature could result in condensation on the product, which could then result in damage to the product. Ensure to leave the product for a while until it has dried off with the power turned off if any condensation has occurred.
-
Ensure to earth any static electricity from your body or clothing before touching the product. Failure to observe this could result in damage to the product.
-
Route and connect the microphone cables correctly. If the microphone cables are pulled or become caught on someone’s leg, the product or connected equipment could tip over or fall, thus resulting in injury or damage to the product.
-
Do not connect the product to any item of equipment other than the YVC-CTU1000 or YVC-MIC1000. Failure to observe this could result in fire, electric shock, or damage to the product.
Precautions for Use
- This product is intended for use in general offices and is not designed for use in any fields requiring a high degree of reliability in the handling of human lives or valuable assets.
- Please note that Yamaha cannot assume any responsibility for any damage resulting from improper use or configuration of the product.
- Depending on the usage environment, this product may generate noise in a telephone, radio, television etc. If this occurs, change the location where it is installed or its orientation.
- If you transfer this product to a third party, please pass this manual and accessories along with it.
- Ensure to follow the instructions of your local government when disposing of the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received including interference that may cause undesired operation.
Warning: Operation of this equipment in a residential environment could cause radio interference.
Information for users on collection and disposal of old equipment:
This symbol on the products, packaging, and/or accompanying documents means
that used electrical and electronic products should not be mixed with general
household waste. For proper treatment, recovery and recycling of old products,
please take them to applicable collection points, in accordance with your
national legislation.
By disposing of these products correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please
contact your local municipality, your waste disposal service or the point of
sale where you purchased the items.
For business users in the European Union: If you wish to discard
electrical and electronic equipment, please contact your dealer or supplier
for further information.
Information on Disposal in other Countries outside the European Union:
This symbol is only valid in the European Union. If you wish to discard these
items, please contact your local authorities or dealer and ask for the correct
method of disposal.
Location of name plate
The name plate is placed on the bottom of the microphone.
Introduction
Thank you for purchasing a YVC-MIC1000EX. The YVC-MIC1000EX is an optional microphone specifically designed for use with the YVC-1000, a unified communications microphone and speaker system. Please thoroughly read this manual before installing and connecting the product. Keep this manual in a safe place for future reference.
- No part of this manual may be copied or used in any form without permission of Yamaha.
- The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the following website then download the manual file. https://uc.yamaha.com/resources/support/
- Yamaha is not liable for any loss or damage to data resulting from use of the product. Please note that the warranty covers repair of the product only.
Check the contents
- Microphone (YVC-MIC1000) x 1
- Microphone cable (5 m) x 1
- User’s Manual (this manual) x 1
Please read other instruction manuals as well as this manual
This manual contains fundamental information only. For detailed information on
how to use the product, please read the following: YVC-1000 user’s manual:
Contains information about utilizing the product in combination with the
YVC-1000. Please download the latest user’s manual from the download page of
our website.
Download page
https://uc.yamaha.com/resources/support/
Controls and Functions
Microphone (YVC-MIC1000)
-
Microphone mute button
Press to temporarily turn off (mute) the microphone. To cancel the mute function, press it again. -
Microphone status indicator
Lights up green when the microphone is active. Flashes red when the microphone is set to mute.
Microphone (YVC-MIC1000): Side
-
Input terminal (IN)
Connects the optional microphone (YVC-MIC1000EX) using the microphone cable.
For detailed instructions, refer to the YVC-1000 user’s manual. -
Output terminal (OUT)
Connects the microphone using the microphone cable.
Microphone (YVC-MIC1000): Bottom
- Name plate
Provides the following information.
Model No.: Model number of the product
SERIAL LABEL: Serial number of the product
Specifications
General
Interface:| Input and output terminals
Operating environment:| Temperature: 0 to 40°C (32 to 104°F)
Humidity: 20 to 85% (no condensation)
Storage environment:| Temperature: -20 to +50°C (-4 to 122°F)
Humidity: 10 to 90% (no condensation)
Dimensions:| 136 (W) x 36 (H) x 136 (D)mm (5.35 x 1.42 x 5.35 in)
Weight:| 0.4 kg (0.9 lbs)
Accessories:| Microphone cable (5 m), User’s Manual
Audio
Microphone units| Unidirectional x3
Important Notice: Guarantee Information for customers in European
Economic Area (EEA) and Switzerland
Important Notice: Guarantee Information for customers in EEA* and
Switzerland
For detailed guarantee information about this Yamaha product, and Pan-EEA and Switzerland warranty service, please either visit the website address below (Printable file is available at the website) or contact the Yamaha representative office for your country. EEA: European Economic Area
https://europe.yamaha.com/warranty/
YAMAHA CORPORATION
Manual Development Group
© 2014 Yamaha Corporation
Published 04/2021 2021 ABES-J0
VFF4540
Documents / Resources
|
YAMAHA YVC-1000 Extension Microphone YVC-
MIC1000EX
[pdf] User Manual
YAMAHA, YVC-1000 Extension Microphone, YVC-MIC1000EX
---|---
|
YAMAHA YVC-1000 Extension
Microphone
[pdf] User Manual
YVC-1000, Extension Microphone
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>