HUMMINBIRD APEX SOLIX Releases Newest Fish Finder User Guide

HUMMINBIRD APEX SOLIX Releases Newest Fish Finder

Product Information:

The product is a control head with various settings and menu functions for easy operation and customization. It has a Home screen that serves as the main control center, providing access to control head settings, navigation data, views, alarms, and other tools. The product also has a status bar located at the top of the screen, which displays important information and allows for quick access to menus.

Product Usage Instructions

1. Power On/Off: Press and hold the POWER key to power on/off the control head. During operation, tap the top right corner of the status bar and select Power Off to turn off the device.
2. First Time Setup: When powering on the control head for the first time, follow these steps:
3. Tap to select “Begin Manual Setup” or use the Joystick and CHECK key to select.
4. Select either “Angler mode” for basic settings and menu functions or “Custom mode” for complete customization. Follow the on-screen prompts to configure the unit.
5. Home Screen: Press the HOME key to open the Home screen from any view. The Home screen provides access to control head settings, navigation data, views, alarms, and other tools. Use the touch screen, Joystick, or ENTER key to make selections.
6. Adjust a Menu Setting: To adjust a menu setting, drag the slider or turn the Rotary dial. For some settings, you may need to press and hold the slider or ENTER key.
7. Close a Menu: To close a menu, tap the Back icon to go back one level or tap the X icon to close the menu. You can also press the EXIT key to close a menu or go back one level, and press and hold the EXIT key to close all menus.
8. Status Bar: The status bar is located at the top of the screen. Tapping the view name or pressing the MENU key opens the X-Press Menu for the on-screen view. Tapping the status bar or pressing the POWER key opens the Power X-Press Menu. The touch menus in the status bar change to match the on-screen view and status.
9. Display a View: Use the touch screen or Joystick to open a view from the Views tool. You can also use the Favorite Views widget in the side bar to display a view from the Home screen.
10. Edit the On-Screen View (X-Press Menu): To edit the on-screen view, follow these steps:
11. For Single-Pane View, tap the view name in the status bar or press the MENU key. For Multi-Pane View, tap a pane or press the PANE key to select a pane, then press the MENU key.
12. Select “(Pane Name) Options > Preferences” to change the appearance of the view.
13. Select “(Pane Name) Options > Overlays” to display or hide information on the view.
14. Select “View Options > Data Overlays” to display data readouts on the view.

QUICK START GUIDE

Power On/Off

• Power On/Off: Press and hold the POWER key.
• Power Off: During operation, tap the top, right corner of the status bar and select Power Off.

First Time Setup

When you power on the control head for the first time, use the Setup Guide to configure the unit. These settings can be adjusted from the Home screen later.

1. Tap to select Begin Manual Setup.
   Or use the Joystick and CHECK key to select.

2. Select Angler mode (basic settings and menu functions for easy operation) or Custom mode (all settings and menu functions for complete customization). Follow the on-screen prompts to configure the unit.

NOTE:

• For additional information, download the APEX/SOLIX Operations Manual from our Web site at humminbird.johnsonoutdoors.com.
• See the Key Functions page at the back of this guide for more helpful tips.

The Home Screen

The Home screen is the main control center for your control head. Use the Home screen to access control head settings, navigation data, views, alarms, and other tools.

Press the HOME key to open the Home screen from any view.

• Tools, views, and widgets available on the Home screen are determined by the equipment attached to the control headnetwork.
• Pair your Bluetooth®-capable control head and mobile phone to receive text message and phone call alerts on your Home screen.
• The Home screen wallpaper can be customized using the Images tool.
• The APEX Home screen and tool menus includes an additional Data Dashboard that displays your connected phone, control head system information and standard data box readouts.

APEX Home Screen

SOLIX Home Screen

Select a Tool, Widget, View, or Main Menu

Use the touch screen, Joystick, or the ENTER key to make selections.

Adjust a Menu Setting

Drag the slider, or press and hold the slider.

Turn the Rotary dial, or press and hold the ENTER key.

Close a Menu

Tap the Back icon to go back one level.

Tap the X icon to close a menu.

Press the EXIT key to close a menu or go back one level. Press and hold the EXIT key to close all menus.

Tips for Using the Status Bar

The status bar is located at the top of the screen.

• Tap the view name or press the MENU key to open the X-Press Menu for the on-screen view.
• Tap the status bar or press the POWER key to open the Power X-Press Menu.

Display a View from the Views Tool

Use the touch screen or the Joystick to open a view from the Views tool.

Display a View from the Favorite Views Widget

1. Tap the Favorite Views widget in the side bar, or press the Rotary dial.
2. Tap a view, or turn the Rotary dial and press the ENTER key.

Edit the On-Screen View (X-Press Menu)

The X-Press Menu displays menu options for the on-screen view, the selected pane, and the operation mode.

1.  Single-Pane View: Tap the view name in the status bar, or press the MENU key. Multi-Pane View: Tap a pane, or press the PANE key to select a pane. Press the MENU key.
2. Select (Pane Name) Options > Preferences to change the appearance of the view. Select (Pane Name) Options > Overlays to display or hide information on the view. Select View Options > Data Overlays to display data readouts on the view.

Activate the Cursor

• Tap a position on the view, or move the Joystick.
• To open the Cursor menu, press and hold a position.

Zoom In/Zoom Out

Pinch out to zoom in, pinch in to zoom out, or press the +/- ZOOM keys.

Set Up Humminbird® Charts: Set the Water Level Offset

When you start your trip for the day using a Humminbird CoastMaster™ or LakeMaster® chart card, it is important to note if the water level is higher or lower than usual. For example, if the digital depth on your control head is showing 3 feet less than the related depth contour for your location, set Water Level Offset to -3 feet.

1. With a Chart View displayed on-screen, tap Chart in the status bar, or press the MENU key once.
2. Select Water Level Offset.
3. Tap the on/off button, or press the ENTER key, to turn it on.
4. Press and hold the slider, or turn the Rotary dial, to adjust the setting.

NOTE: A Humminbird CoastMaster or LakeMaster chart card must be installed and selected as the chart source to enable this feature.

NOTE: To apply depth colors, depth highlight range, etc., go to the Chart X-Press Menu > Humminbird Settings. See your operations manual for details.

Mark Waypoints

Open the Mark Menu and select Waypoint, or press the MARK key twice.
If the cursor is not active, the waypoint will be marked at the boat position. If the cursor is active, the waypoint will be marked at the cursor position.

Activate Man Overboard (MOB) Navigation

As soon as you know you have a man overboard, press and hold the MARK/MAN OVERBOARD key. See your operations manual for details.

NOTE: To end navigation, press the GO TO key and select Cancel Navigation.

Start Quick Route Navigation (touch screen)

1. Open the Cursor Menu: Press and hold a position on the chart.

2. Select Go To.

3. Select Quick Route.

4. Tap the chart in the positions where you want to mark a route point.
   Undo Last Route Point: Tap the Back icon.
   Cancel Route Creation: Tap the X icon.

5. To start navigation, tap the check icon in the status bar.
   Cancel Navigation: Tap Chart in the status bar. Select Go To > Cancel Navigation.

Start Quick Route Navigation (keypad)

1. Press the GO TO key.

2. Select Quick Route.

3. Use the Joystick to move the cursor to a position or waypoint. Press the Joystick to mark the first route point.

4. Repeat step 3 to connect more than one route point.
   Undo Last Route Point: Press the EXIT key once.
   Cancel Route Creation: Press and hold the EXIT key.

5. To start navigation, press the ENTER key.
   Cancel Navigation: Press the GO TO key. Select Cancel Navigation.

Pair a Phone with the Control Head

Use the following instructions to pair a mobile phone to the control head using Bluetooth wireless technology. (Available with Bluetooth supported Humminbird products and mobile devices only. Wifi or data connection required.)

Enable Bluetooth on the Phone

1. Open the Settings menu on your phone.
2. Select Bluetooth.
3. Select On.

Pair the Phone with the Control Head

1. Press the HOME key.
2. Select the Bluetooth tool.
3. Under Phone Bluetooth, select Settings.
4. Select Connect Phone.
5. Follow the on-screen prompts to complete the pairing process.
6. Check your phone. When prompted, tap Pair on your phone.
7. Press Confirm on your control head.
   Upon successful pairing, the control head will be listed as connected under the phone’s Bluetooth menu.

Change the Phone Bluetooth Notification Settings on the Control Head

1. Under the Phone Bluetooth menu, select Settings.

2. Select Text Message Alerts or Phone Call Alerts.
   Tap to select an alert format. To turn off notifications, select off.

3. Turn Sounds On/Off: Select Sounds. Select on or off.

Change the Phone Bluetooth Notification Settings on the Phone

1. Apple iOS: Open the phone’s Bluetooth menu, and select the control head under My Devices.
   Google Android: Open the phone’s Bluetooth menu, and next to the control head’s name under Paired Devices, select Settings.

2. Apple iOS: Turn on Show Notifications.
   Google Android: Turn on Message Access.

Managing your Humminbird Unit

Register your Humminbird

Register your product(s) and sign up to receive the latest Humminbird news, including software updates and new product announcements.

1. Go to our Web site at humminbird.johnsonoutdoors.com, and click Support > Register Your Product. Follow the on-screen instructions to register your Humminbird product.

Download the Operations Manual

1. Go to our Web site at humminbird.johnsonoutdoors.com, and click Support > Manuals.
2. APEX: Under APEX Series, select APEX Series Product Manual.
   SOLIX: Under SOLIX Series, select SOLIX Series Product Manual.

Update Software

It is important to keep your control head and accessory software up to date. You can update software using an SD or microSD card (depending on your APEX/SOLIX model) or by using Bluetooth wireless technology and our One-Boat Network App®. See your operations manual for complete details about updating software.

• Before you install software updates, export your menu settings, radar settings, and navigation data from your control head to an SD or microSD card. Copy your internal screen snapshots to an SD or microSD card.
• To check your current software version, press the HOME key and select Settings > Network > System Info.
• To update software with an SD or microSD card, you will need a formatted SD card or microSD card with an adapter. Visit our Web site at humminbird. johnsonoutdoors.com and click Support > Software Updates. Select the software update for your control head model and follow the on-screen instructions to save the software file to the card. Then, power on the control head and install the SD card in the card slot. Follow the on-screen prompts to confirm the software update.
• To update software with the One-Boat Network, visit our Web site at humminbird.johnsonoutdoors.com and click Learn > One-Boat Network App. Use the One-Boat Network App to download and push software updates directly to your Humminbird control head or accessory. (Available with Bluetooth supported Humminbird products and mobile devices only. Wifi or data connection required.)

NOTE: Your control head must already be running software release 4.130 or higher to support this feature.

Contact Humminbird
Contact Humminbird Technical Support through our Help Center at <https ://humminbird-help.johnsonoutdoors.com/hc/en-us> or by writing to the address below:

Humminbird Service Department 678 Humminbird Lane
Eufaula AL 36027 USA
Social Media Resources:

Facebook.com/HumminbirdElectronics
Twitter.com (@humminbirdfish)
Instagram.com/humminbirdfishing
YouTube.com/humminbirdtv

References

• humminbird.johnsonoutdoors.com
• johnsonoutdoors.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>