BARATZA Vario Coffee Grinder Electric White Instruction Manual
- June 12, 2024
- BARATZA
Table of Contents
Parts List & Exploded View
PRIMARY COMPONENTS
| Item # | Part # | Part Description | Total Used |
|---|---|---|---|
| 1 | 1010** | Hopper Lid Clear | 1 |
| 2 | 1012** | Shut off Hopper (rev. 1.2) with spring ball | 1 |
| 3 | NA | Grind Chamber Top Casting (Assembly) | 1 |
| 4 | 8037-BLK | Black Plastic Rear Housing (Baratza Logo) (Vario+, Vario W+) | 1 |
| 4 | 8037-WHT | White Plastic Rear Housing (Baratza Logo) (Vario+, Vario W+) | 1 |
| 5 | F8029* | M3x12 machine screw | 2 |
| 6 | F8235* | M3x18 Self-Tapping Screw | 2 |
| 7 | 6049* | Rubber Foot | 4 |
| 8 | 8078-BLK* | Black Vario+ Display Assembly | 1 |
| 8 | 8078-WHT* | White Vario+ Display Assembly | 1 |
| 9 | 8057 | Knob Mount (Black) (Vario+, Vario W+) | 2 |
| 10 | 8055 | Knob (Metal) (Vario+, Vario W+) | 2 |
| 11 | F8275* | M3x5 Countersunk Self-Tapping Screw | 1 |
| 12 | F8214* | M3x4 Countersunk Machine Screw | 2 |
| 13 | 8160* | Grounds Bin (Vario) | 1 |
| 14 | 1050* | Metal Porta-Holder (Complete Assembly) | 1 |
| 15 | NA | Main Structure (Assembly) | 1 |
| 16 | F8093 | M3 External Tooth Star Lock Washer | 2 |
| 17 | F8029* | M3x12 Machine Screw | 2 |
* Frequently needed service parts Occasionally needed service parts NOTE: No need to stock parts without asterisks
MAIN BODY ASSEMBLY
| Item # | Part # | Part Description | Total Used |
|---|---|---|---|
| 1 | 8330-BLK | Black Top Casting with nickel plating and pad printing (Vario+) |
1
1| 8330-WHT| White Top Casting with painting and pad printing (Vario+)| 1
2| 6032| Micro Switch| 1
3| 8032| L-Bracket for Microswitch| 1
4| NA| Grinding Chamber Assembly| 1
5| F8093| M3 external tooth star lock washer| 6
6| F8029| M3x12 Machine Screw| 6
7| FS714| M3x8 Self Tapping Screw| 4
8| 8060| 110v Power Board (Vario)| 1
9| 8061| 230v Power Board (Vario)| 1
10| F8223| Tinnerman Clip| 2
11| 8020| Ballast for Vario/W/Forte| 1
12| 8321| Black Plastic Base| 1
12| 8321-WHT| White Plastic Base (Vario(+), Vario W(+))| 1
13| 1022| Black Plastic Cord Cover (Vario(+), Vario-W(+), Forte)| 1
13| 1022-WHT| White Plastic Cord Cover (Vario+, Vario W+)| 1
14| 1369| LED into Grounds Bin| 2
15| 8094| Calibration Grommet| 1
16| 8023| Chassis (Vario/W/Forte)| 1
16| 8023-WHT| White Chassis (Vario+, Vario W+)| 1
17| 8028| Vario Belt Casting| 1
18| 8127| PortaHolder Ball| 1
19| 8128| PortaHolder Ball Spring| 1
20| F6122| M6-1.25×8 Machine Screw| 2
21| F6121| M3.5×11 plastic thread cutting screw| 5
NS| 6028| Motor Ground Wire| 1
* Frequently needed service parts Occasionally needed service parts NOTE: No need to stock parts without asterisks
GRIND MOTOR ASSEMBLY
| Item # | Part # | Part Description | Total Used |
|---|---|---|---|
| 1 | 8067 | Upper Burr Carrier (rev. 1.2) (Vario/Vario-W) | 1 |
| 2 | F8175* | M4x8 Cheese Head Machine Screw for Ceramic Burr | 6 |
| 3 | 8174* | Ceramic Burrs (each) (with 3 screws (F8175)) | 2 |
| 4 | 8070 | Vario Rotating Burr Carrier | 1 |
| 5 | 8224 | Grind Chamber Gasket | 1 |
| 6 | 1024 | Metal Threaded Grind Chamber (With Bushing) | 1 |
| 7 | 8087 | Anti-Static Flapper | 1 |
| 8 | 8088 | Discharge Chute | 1 |
| 9 | 8089 | Ground Chute Gasket (Vario/W/Forte) | 1 |
| 10 | F8096* | M4x6.5 Set Screw with Custom Tip | 1 |
| 11 | F8093 | M3 External Tooth Star Lock Washer | 5 |
| 12 | F8302* | M3.5×16 Plastic Thread Cutting Screw | 4 |
| 13 | 8053 | Plastic Micro Adjustment Arm | 1 |
| 14 | 8051 | Micro Cam | 1 |
| 15 | 8052 | Plastic Macro Adjustment Arm | 1 |
| 16 | 8046 | Grind Adjustment Spline | 1 |
| 17 | 8045 | Adjustment Rocker | 1 |
| 18 | 8056* | Vario/Vario-W Main Drive Gear w/ metal sleeve | 1 |
| 19 | 8077 | HTD Belt 112mxl (Not Sold Seperately) | 1 |
| 20 | F6189* | M5x12 Machine Screw | 2 |
| 21 | 8091* | Motor Plate (W/4 Grommet Sleeve Assemblies And Bushing) | 1 |
| 22 | 8078 | Belt Tensioning Bracket w/ screw for Vario Series | 1 |
| 23 | 8099 | Vario/W D-Shaft Motor Drive Pulley w/ Set Screw (F8296) | 1 |
| 24 | F8296* | M4x5 Point Tip Hardened Set Screw | 1 |
| 25 | 1036* | 120V Motor D-Shaft (Vario/W, Forte) (use w/6394) | 1 |
| 26 | 1037* | 230V Motor D-Shaft (Vario/W, Forte) (use w/6394) | 1 |
| 27 | F8095* | M3x8 Machine Screw | 1 |
| NS | 6394** | Vario/Vario-W D-shaft Pulley w/ Set Screw & BELT (only compatible | |
| w/1036 or 1037) | 1 | ||
| NS | 8097 | Jumper Wire: Power Board to Display Board (Vario/W/Sette) | 1 |
| NS | 8098 | Jumper Wire: Power Board to Microswitch (Vario/W/Forte) | 1 |
| NS | 6022 | Motor Cable – Red & Black | 1 |
| NS | 8054 | Adjustment Arm Shim | 2 |
* Frequently needed service parts Occasionally needed service parts NOTE: No need to stock parts without asterisks
www.baratza.com
sales@baratza.com
04/12/2022 (v1)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>