hansgrohe 71560XXX Vernis Shape with Pop-up Waste Set Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe 71560XXX Vernis Shape with Pop-up Waste Set Instruction Manual
Model Instructions
Vernis Shape 70
71560XXX / 71566000 / 71567XXX / 71596000
Vernis Shape 70 CoolStart
71593XXX / 71535004
Vernis Shape 100
71561XXX / 71568000 / 71569XXX / 71597000
Vernis Shape 100 CoolStart
71594XXX
Vernis Shape
71211XXX / 71219XXX
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment
To adjust the hot water limiter. Using a hot water limiter in combination with
a continuous flow water heater is not recommended.
Dimensions
Flow diagram
Spare parts
XXX = Colors
000 = Chrome Plated
670 = Matt Black
Special accessories (order as an extra)
-
special tool #58085000
-
Installation putty
Cleaning
Operation
- Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
- After periods of prolonged non-use, but at least every third day, the fittings must be opened with the handle in hot and cold position to prevent stagnation in the connecting lines. Let the water run until the water temperature is constant.
Test certificate
Fitting Instructions
Cleaning recommendation / Warranty / Contact
www.hansgrohe.com/cleaning-recommendation
www.hansgrohe.com/cleaning-recommendation
www.hansgrohe.com/cleaning-recommendation
www.hansgrohe.com/cleaning-recommendation
Vernis Shape 70
71560XXX / 71566000 / 71567XXX / 71596000
Vernis Shape 100
71561XXX / 71568000 / 71569XXX / 71597000
Vernis Shape 70 CoolStart
71593XXX / 71535004
Vernis Shape 100 CoolStart
71594XXX
Vernis Shape
71211XXX / 71219XXX
Vernis Shape 70
71560XXX / 71566000 /
71567XXX / 71596000
Vernis Shape 70 CoolStart
71593XXX / 71535004
Vernis Shape 100
71561XXX / 71568000 /
71569XXX / 71597000
Vernis Shape 100 CoolStart
71594XXX
Vernis Shape
71211XXX / 71219XXX
Vernis Shape 70 CoolStart
71593XXX / 71535004
Vernis Shape 100 CoolStart
71594XXX
Vernis Shape 70
71560XXX / 71566000 / 71567XXX / 71596000
Vernis Shape 100
71561XXX / 71568000 / 71569XXX / 71597000
Vernis Shape
71211XXX / 71219XXX
Vernis Shape 70
71560XXX / 71566000 / 71567XXX / 71596000
Vernis Shape 70 CoolStart
71593XXX / 71535004
Vernis Shape 100
71561XXX / 71568000 / 71569XXX / 71597000
Vernis Shape 100 CoolStart
71594XXX
Vernis Shape
71211XXX / 71219XXX
Vernis Shape 70
71560XXX / 71566000 / 71567XXX /
71596000
Vernis Shape
71211XXX / 71219XXX
Open
Vernis Shape 100
71561XXX / 71568000 / 71569XXX /
71597000
Close
Cold
Hot
Vernis Shape 70 CoolStart
71593XXX / 71535004
Vernis Shape 100 CoolStart
71594XXX
Open
Close
Cold
Hot
| 71560XXX | PA-IX 29967/IO | DM0446 | X |
|---|---|---|---|
| 71561XXX | PA-IX 29967/IO | DM0446 | X |
| 71566000 | PA-IX 38007/IO | DM0446 | X |
| 71567XXX | PA-IX 38003/IO | DM0446 | X |
| 71568000 | PA-IX 38007/IO | DM0446 | X |
| 71569XXX | PA-IX 38007/IO | DM0446 | X |
| 71593XXX | PA-IX 38008/IO | DM0446 | X |
| 71594000 | PA-IX 38008/IO | DM0446 | X |
| 71596000 | PA-IX 38134/IO | DM0446 | X |
| 71597000 | PA-IX 38134/IO | DM0446 | X |
| 71211XXX | X | ||
| 71219XXX | X | X |
71535004
Vernis Shape 70
71560XXX / 71596000
Vernis Shape 100
71561XXX
Vernis Shape 70
71566000 /71567XXX
Vernis Shape 100
1568000 / 71569XXX /
Vernis Shape 70 CoolStart
71593XXX
Vernis Shape 100 CoolStart
71594XXX
Vernis Shape
71211XXX
Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach·
Telefon +49 (0) 78 36/51-1282 ·
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com ·
Internet: www.hansgrohe.com
References
- Taps for bathrooms, showers and kitchens
- Banyo ve mutfak için musluk ve armatürler
- Taps for bathrooms, showers and kitchens
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>