OHZOIRIC VC-008A Cordless Nail Drill User Manual
- June 12, 2024
- OHZOIRIC
Table of Contents
Cordless Nail Drill
VC-008A
User Manual
Knowing your Nail Drill
How to use
Choose the right drill bit and insert it to the front hole of the nail drill machine.
The insert spacing is about 3mm, as shown in the picture.
Connect to a power source.
When the battery is charging, the indicator will blink red. Once the battery
charges to completion, the red light will turn green.
Specifications
Input: DC 5V/500mA
Output: DC 7V/1A
Capacity: 650mA
Speed: 6000/12000/20000RPM
Charging Time: 2.5H
Working Time: 4-4.5H
Waterproof: N/A
Attention please!
- When the nail drill machine is rotating, do not attempt to pull out the grinding bits in the machine.
- Do not attempt to repair the product without authorization, if there is any quality problem, please contact the dealer.
- Keep away from children.
- Please active the machine when it fails to start, by charging it for a little while, and then unplug the charger and try again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>