Finger Dance BX16S 88 Key Keyboard Digital Piano Full Size Upgrade User Manual

Finger Dance BX16S 88 Key Keyboard Digital Piano Full Size Upgrade User Manual

Overview

The following interface function diagram

Please charge before use!

Charge

1. Type C charging port
2.  Not applicable to PD type quick charging cable.
3. When the piano is plugged into USB for charging, the charging indicator is red. and when the battery is frill the charging indicator is green.
4. Battery: High-capacity lithium battery, the charging time is about 5h, please charge for more than 6h for the first use.
5. 5V/2A Charging adapter: 5V 2A
6. 10 minutes without playing the piano will go into hibernation mode.

Interface

1. SUS: Sustain pedal delay function
2. MP3: Audio input function
3. MIC: Microphone function
4. : Audio input function
5. USB: MIDI Type C charging/transferring MIDI

Function

1. By default, press + and – to adjust the volume (from 00-15), and the default volume is 12.

2. The system returns to the default state about 8 seconds later ii’no operation.
   —-Press the + and – keys to adjust the volume

3. Long press + key to add quickly, long press – key to subtract quickly.

4. Press + and – at the same time to return to Zero: return to Tone 000(grand piano) in tone mode, return to 000th demo song in demo mode, return to 000th rhythm in
   rhythm mode, and return to level 12 volume in volume mode.

5. Long press the Setting button, you can hear two beeps, and the left part of the keyboard keys become function keys, as shown in the following table:
   

6. Short press the Setting button to enter the Start/Stop playing mode.
   Digital tube display rhythm serial number, press +/ – to switch rhythm play.

7. Tone
   A) Press the Tone button, and press + and – to switch tone. Digital tube shows the serial number of tone.
   B) Press the number key 0~9 (C~A) can directly input the tone number(000~127), the number beyond the range is ignored.

8. Demo
   A) Press the Demo button to play the demo song, select the demo song from 000~020, and the digital tube displays the serial number of the demo song.
   B) Press the + / – button to switch the demo song.
   C) Press the number key 0~9 (C~A) to directly enter the sequence number (000~020), and the number beyond the range is ignored.

Compound function key (Long press Setting) Rhythm

1. Press the Rhythm key (A2) to play the rhythm and select the rhythm from 000 to 127.
   The digital tube displays the serial number of the rhythm.

2. Press + and – to switch the rhythm.

3. Press the number key 0~9 (C~A) to directly enter the rhythm number (000-127), and the number beyond the range is ignored

Chord

1. Press the Chord key (bB2) and cycle switch: single-finger chord multi-finger chord chord closure single-finger chords ……
2. The system enters chord opening mode during the rhythm playing.
   Chord function: press the key in A2 ~f# to play the chord matching the rhythm, and the tone o1’the chord changes with the pitch of the key.

Metronome

1. Press the Metronome key (B2) and cycle to switch: 1/4, 2/4, 3/4,4/4.
2. After pressing the metronome button, press the + button to switch the tone.

Volume
Press the Volume – key (CI) and Volume + key (#Cl) to adjust the volume (from 00-1s).
The default volume is 12.

Transpose

1. Press the Transpose – key (D1) and the Transpose + key (bE1) to adjust the transpose from -6 to 6.The default boot level is 0.
2. Hold down the Transpose – key (D1) and Transpose + key (bE1) at the same time to move back to level 0.

Tempo

1. Press Tempo – key (El) and Tempo + key (F1) to adjust the tempo from level 0 to level 16.
   The default boot level is 8.

2. hold down the Tempo – key (E2) and Tempo + key (F2) at the same time, speed back to level 8.

Velocity switch

1. Press the Velocity switch key (fF1) to close and then press it again to open.
2. Turn on by default.

LED switch (Need to buy products with LED.)

1. Press the LED switch (G1) to turn off, and then press it again to turn on.
2. The default LED is on (if the piano have LED).

Split
Press the Split key (#G1) to open the split function, and then press it again to close this function.

Drum Kit

1. Press the Drum Kit key (AI) to open this function, and then press it again to close this function.
2. When the Drum Kit is turned on, turn all the keys into percussion tone, and when turn off the Drum Kit, turn off the percussion tone.

Sustain

1. Press the Sustain key (bB1) to enable the sustain, and then press it again to close.
2. Turn on the sustain function to produce sound delay effect during performance.

Vibrate

1. Press the Vibrate key (B1)to enable the vibrate function, and then press it again to disable the vibrate function.
2. Open the vibrate function, in the performance of the tone to produce vibrate effect.

Demo

The tone of table

The rhythm of table

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>