hansgrohe 71803000 Kitchen Mixers Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe 71803000 Kitchen Mixers
Model
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The hot and cold supplies must be of equal pressure.
- Only dishwashers and washing machines certified with the DVGW emblem may be connected to the appliance connection valve without an additional fuse. If no consumer is connected to the appliance connection valve, it must be plugged in.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
- Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Assembly
Symbol Description
- Do not use silicone-containing acetic acid!
Adjustment
To adjust the hot water limiter. Using a hot water limiter in combination with a continuous-flow water heater is not recommended.
Dimensions
Flow diagram
- Rate of flow mixer
- Rate of flow stop valve
Spare parts
Cleaning
Cleaning recommendation/Warranty/Contact
www.hansgrohe.com/cleaning-recommendation
Operation
Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
Open
Close
Hot
Cold
Test certificate
Contact information
Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com.
Internet: www.hansgrohe.com.
Read User Manual Online (PDF format)
Loading......