Puig 4620 Plus Windscreen Owner’s Manual
- June 12, 2024
- Puig
Table of Contents
Puig 4620 Plus Windscreen
Product Information
This product is a windshield plus model designed for mounting on a Kawasaki Z900RS ’18- motorcycle. It comes with a kit (REF 10931) that includes various parts and screws for installation.
Product Usage Instructions
- Start by disassembling the existing windshield on your Kawasaki Z900RS ’18- motorcycle.
- Choose the appropriate mounting system based on the model:
- Option A: ID9+ ID10+ ID11+ID8
- Option B: Original screw + ID11 (if necessary) + Original nut
- Follow the assembly instructions:
- Lock the inclination system using either Option A (ID5+ ID6) or Option B (ID13+ID12+ID6).
- Mount the screen using the provided M8x40 DIN 912 screw (TORNI-AD912-475).
Please note that maintaining the vehicle is essential, and it is recommended to follow these mounting instructions whenever maintenance is required. For any further information or assistance, you can visit the official website at www.puig.tv or www.puigusa.com. You can also contact Puig via email at info@puig.tv or info@puigusa.com.
OVERVIEW
TOOLS REQUIRED
Do not use thread-lock glue on screws/nuts as it can produce cracking on the
plastic.
It would be convenient to re-tight the windshield screws, especially the ones
that are fixed to the motorcycle, whenever you maintain the vehicle. Thanks
for your attention.
| ID | PIEZA/PART | DESCRIPTION | QTY | REF |
|---|
1
| |
Screen
| ****
1
| ****
10228F/H/NM3
2| | Inox left support| 1| SOPORT2PIP2-L06
3| | Inox right support| 1| SOPORT2PIP2-R06
4| **| M6x8 ISO 7.380 screw| 4| TORNIAI7380-300
5|
| M6x12 DIN912 screw| 2| TORNIAD912-0230
6|
| M6 DIN 934 Nut| 2| TUERCAEM6G-0213
7| **| Ø6,1 xØ11 x1mm plastic washer| 4| ARANDEPNVCN0246
8| | M8 DIN 6923 nut| 2| TUERCEG6923-249
9| | M8x35 DIN 912 screw| 2| TORNI-AD912-196
10| | Ø18 xØ8 x1,5mm flat washer| 2| ARANDPD125A-018
11| | Ø15 xØ8 x9mm Arrowhead| 2| CASQUI8159-0266
12| | Ø12 xØ6 x8,5mm Arrowhead| 2| CASQUI—- 0298
13| | M6x20 DIN912 Screw| 2| TORNI-AD912-489
14| | 30x30x7mm microporous adhesive (**)| 2| ADHESI-M30DX7–
TO INSERT BETWEEN THE SCREEN AND THE BIKE PANEL, IF IT WAS NECESSARY
MOUNTING INSTRUCTIONS
| ID | PIEZA/PART | DESCRIPTION | QTY | REF |
|---|---|---|---|---|
| 1 | **** | M8x40 DIN 912 screw | 2 | TORNI-AD912-475 |
References
- Puig Hi-Tech Parts: Windscreens, accessories and tuning for your bike - Puig Hi-Tech Parts
- Puig Hi-Tech Parts: Windscreens, accessories and tuning for your bike - Puig Hi-Tech Parts
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>