FS FHU-BPS-1U-10 Angled Filler Panel 1U Black Instruction Manual
- June 12, 2024
- FS
Table of Contents
FS FHU-BPS-1U-10 Angled Filler Panel 1U Black
Product Information
The product models are FHU-BPS-1U-10 and ABPS-1U-10. The products designed as a 1U rack-mounted device.
Product Usage Instructions
- Ensure that the product is placed in a suitable rack or cabinet that can accommodate a 1U device.
- Connect the power supply to the product using the provided power cable.
- If using FHU-BPS-1U-10, connect any necessary external devices or cables to the available ports.
- Power on the product by pressing the power button located on the front panel.
- Wait for the product to boot up and initialize.
- Once the product is ready, it can be used according to its intended purpose.
- Refer to the user manual for specific instructions on configuring and operating the product.
- To turn off the product, press and hold the power button utility shuts down completely.
- Disconnect the power supply from the product when not in use or during maintenance.
Please note that these instructions are generic and may vary depending on the specific features and functionalities of your product model. Always consult the user manual for accurate and detailed usage instructions.
FHU-BPS-1U-10
ABPS-1U-10
FHU-BPS-1U-10
ABPS-1U-10
Optional (Not Included)
40x
1x
NOTE: Fix the panel to the rack with screws and cage nuts..
Q.C. PASSED
Copyright © 2022 FS.COM All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>