MENU Cast Sconce Wall Lamp Instruction Manual

MENU Cast Sconce Wall Lamp

Product Information

The product is a Wps Lanmac SWee CWlo au Mnh grmd T Cnpb&m Jrpogu. It is designed for various purposes and comes with multiple features, including BnmfqWstkWshnmr vhsg xntq mdv BWrs Pbnmbd UWkk KWlo ax Snl Bgtmf. The product is equipped with InqcWm Ltqogx technology for enhanced performance. It also has a MkdWrd enkknv feature for improved functionality.

Product Usage Instructions

1. Make sure to read the user manual carefully before using the product.
2. Connect the product to the appropriate power source.
3. Follow the provided instructions to set up the product.
4. For optimal performance, ensure that all necessary connections are properly made.
5. Use the provided controls and buttons to operate the product.
6. Refer to the user manual for troubleshooting tips and solutions.

Congratulations with your new
Cast Sconce Wall Lamp by Tom Chung & Jordan Murphy. We hope you will enjoy using it.
Please follow these instructions carefully to ensure the safe and correct installation of your new lamp.

COMPONENT OVERVIEW

• 1 x Lamp

TOOLS NEEDED

TECHNICAL SPECIFICATIONS

TECHNICAL DETAILS

• Plug: CE-certified plug
• Cord: VDE-certified cord

LIGHTSOURCE DETAILS:

• LED PC board
• Watt:3.6 W
• Lumen output: 180 Lumen
• efficiency: 50 Lm / W
• Color temperature: 2700 K
• CRI: > 80
• Energetic class: G

THE LAMP RANGE IS TESTED ACCORDING TO

• Ceiling / Pendant lamp: EN 60598-2-1
• Bulb: EN 62560
• EMC: EN 55015 EN 61547 EN 61000-3-2 EN 61000-3-3
• The lamp conforms to IP20.

DIMMER INCLUDED

If installed hardwired you need to use a TRIAC dimmer.

NOTE
Contact a qualified electrician if you experience any issues during installation.
The external cable cannot be replaced. If damaged, it must be replaced only by the manufacturer, their service agent or another qualified individual.

WARNING
Improper installation, adjustment, alteration, service, maintenance or use can cause personal injury or property damage.
Before installing, always turn off the power for the circuit.
The lamp is unable to be adjusted once mounted. Please ensure the correct shade angle before attaching to a wall.
To adjust the shade without damaging the lead, unscrew the cord and position the shade to the desired angle before reattaching the lead to the back of the lamp. It is now ready to be mounted.

CAUTION
Keep this product and its packaging out of children’s reach.

DISPOSAL
At the end of its life, dispose of this lamp in the correct waste bin or at a recycling station.
Do not discard as household waste. Your local authority can provide further information on where and how it can be disposed of.
The EU Waste from Electrical and Electronic Equipment WEEE) Directive 2005 encourages the recycling of this item.

IMPORTANT INFORMATION

Due to the wide diversity of wall or partition types, we cannot provide you with suitable attachment fixtures. To determine which attacment futures to use, you will need to identify the type of wall to which you will be fixing this product. Here are some examples of attachment fixtures recomended for:

DRILL
Use a drill bit that is compatible in size with the hardware used and the type of wall.

CONFIGURATION
Is possible to install the product in 2 configuration:

• With cord (Page 6)
• Hardwired (Page 9)

ASSEMBLY

@menuspace
www.menuspace.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>