Pablo Nivel Pendant and Flush Instruction Manual
- June 12, 2024
- Pablo
Table of Contents
Pablo Nivel Pendant and Flush Instruction Manual
NFO@PABLODESICNSCOM
INFO@PABLODES CNS.EU
888 MARIN ST
SAN FRANC SCO CA
94124
PABLODESIGNS.COM
PABLODESIGNS.EU
INFO@PABLODESIGNS.COM
888 MARIN STREET
SAN FRANCISCO CA
94124
PABLODESIGNS.COM
NIVÉL
ASSEMBLY
SPECIFICATIONS
NIVÉL PENDANT
ASSEMBLY
-
SECURE MOUNTING PLATE TO JBOX OR CEILING.
-
SECURE TRANSFORMER TO PLATE USING PROVIDED TAPE. WIRE TRANSFORMER TO BUILDING WHITE TO WHITEBLACK TO BLACK
-
A PASS CORD THROUGH CANOPY AND STRAIN RELIEF. SET LAMP HEIGHT BY TIGHTENING THE SET SCREW.
B CUT CORD TO LENGTH: WRAP CABLE IN ELECTRICAL TAPE BEFORE CUTTING TO PREVENT FABRIC SLEEVE FROM
FRAYING NOTE! INCLUDE AN ADDITIONAL 3 INCHES 7.6CM FOR WIRING -
WIRE LAMP TO TRANSFORMER RED TO WHITEBLACK TO BLACK
-
SECURE CANOPY TO MOUNTING PLATE.
NIVÉL FLUSH
ASSEMBLY
-
WIRE BUILDING TO TRANSFORMER WHITE TO WHITEBLACK TO BLACK
-
WIRE TRANSFORMER TO MOUNT BRACKET ASSEBLY RED TO REDBLACK TO BLACK. PLACE TRANSFORMER INTO
JBOX AND SECURE MOUNT BRACKET USING SCREWS PROVIDED. -
SECURE CANOPY COVER TO MOUNT BRACKET USING 2 SCREWS PROVIDED.
-
THREAD LAMP ASSEMBLY ON TO CANOPY ASSEMBLY.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>