legrand AP3025 Access Point User Guide
- June 12, 2024
- Legrand
Table of Contents
AP3025 Access
Point
User Guide
Access Point Setup Guide
1. Setting up your AP:
Place the AP in the center of the desired coverage area
NOTE: If installing this AP with a
wireless controller, refer to the Wireless Controller Setup Guide
2. Connect a PoE+ Ethernet cable to the AP’s PoE port (for power, use a PoE
injector or a compatible PoE+ switch – not included)
NOTE: Power
Supply Cord must be connected to a properly grounded outlet.
3a. Connecting Via an Ethernet Device
Use an Ethernet cable to connect your computer to the LAN port of the AR
Ethernet is the preferred method of connection
3b. Connecting Via a Wireless Device
Connect a wireless client device to the AP’s default wireless SSID Luxul_AP-
302X and use the passphrase: luxulwifi X corresponds to the model number of
the AP
NOTE: If your computer or device isn’t set to obtain an IP address
automatically, you’ll need to set a temporary static IP address on that
device. Set the IP address of your computer to an address in the 192168.0.X
range and set your subnet mask to 255.255.255.0. You can leave the default
gateway/router ip address blank.
4. Open a
web browser and go to 192168.010
Login with the default User Name and password
User Name: admin
Password: admin
SECURITY NOTE: You will be required to h: A change the default
administrator password.
What if…
I need to restore factory default settings?
To restore factory default settings to your AP, press and hold the button
labeled ‘RESET’ until the green system LED starts flashing (5 seconds)
I need to restart my AP?
To restart your AP, press and quickly release the button labeled ‘RESET’
I want to perform advanced configuration?
- Open a web browser and go to 192168,0.10 or the IP address you specified during the setup process
- Enter the login credentials you created during the setup process
View Luxul’s Privacy policy at:
https://www.learanday.com/lenal/orivacypolicy
The marking information is located at the bottom of the apparatus
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any
purposes without permission in writing from Luxul. The material in this
document is subject to change without notice. Luxul reserves the right to make
changes to any product to improve reliability, function, or design. No license
is granted, either expressly or by implication or otherwise under any Luxul
intellectual property rights. An implied license only exists for equipment,
circuits and subsys-tems contained in this or any Luxul product.
Copyright 2022 Legrand AV Inc.
All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and
Simply Connected are all trademarks and or registered trademarks of Legrand AV
Inc.
All other trademarks and registered trademarks are property of their
respective holders.
Suggested Operation Temperature: -20° to 50°C AP-3025-016-220919-01
What do the LEDs on my AP indicate?
| Indicator | State. | Description |
|---|---|---|
| Green System LED | On | AP is properly connected to power supply |
| Blinking | AP is booting | |
| Off | Power disconnected or AP is off, or LEDs are turned off in the web |
interface
Blue LEDs| The blue LEDs indicate the status of the wireless broadcast; one
for 2,4GHz and the other for 5GHz
On| AP is broadcasting a wireless signal
Blinking| Indicates wireless activity
Off| AP is not broadcasting a signal, or the LEDs are turned off in the web
interface
Technical Support
P: 801-822-5450 E:
support@luxul.com
Support chat: LegrandAV.com click ‘Live Chat’
(upper right) and select Luxul under ‘Brand’
Sales P: 801-822-5450
E: sales@luxul.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>