Brilliant INHP1447GR Wireless Headphone User Guide

June 12, 2024
brilliant

Brilliant logo

WIRELESS
HEADPHONESBrilliant INHP1447GR Wireless Headphone USER GUIDE
INHP1447GR

What’s in the box?

Brilliant INHP1447GR Wireless Headphone -
headphones

A. 1 pair wireless headphones
B. 1 micro USB charging cable
C. 1 quick start quide & warranty card

Initial Setup

  1. Use the included micro USB charging cable to connect your headphones to a power source and charge your device for 1-2 hours.Brilliant INHP1447GR Wireless Headphone - power
  2. Once your headphones are fully charged, press and hold the POWER button for 2 seconds until the indicator light blinks red and blue. Your headphones are now in pairing mode.
  3. On your smartphone or tablet, search for the Bluetooth'” device named “INHP1447” and tap to connect. A blinking blue indicator light will confirm successful pairing.

Button Functions

PREVlOUS/VOLUME·
Press once to p|ay the prevlOUS track.
Press and hold for 2 seconds to decrease volume.
Press and hold for 2 seconds to turn on your device.
Press and hold for 2 seconds to turn off your device.
Press once to PLAY. Press again to PAUSE.
NEXT/VOLUME+
Press once to play the next track.
Press and hold for 2 seconds to increase volume.

Answering Phone Calls

Brilliant INHP1447GR Wireless Headphone - headphondes

Pairing ® Bluetooth

After initial Bluetooth” pairing, your headphones will automatically connect to the previously paired device when turned on.
To pair your headphones to a new device:

  1. Disable Bluetooth ® on your previously connected device.

  2.  Press the POWER button on your headphones for 2 seconds to enter Bluetooth ® pairing mode.
    The LED light on your headphones will blink red and blue, indicating that pairing mode is active.

  3.  On the new device you wish to pair,search for the Bluetooth® device named”INHP1447″ and tap to connect. A blinking blue light will confirm successful pairing.

The Specs

Model INHP1447GR
Bluetooth” Bluetooth ® 5.3
Speaker Rated Output Power 15 mW
 Impedance 16 ohms
Sensitivity 100 dB+/-3 dB
Frequency Response 20 Hz-20 kHz
Play Time 10 hours {50% volume)
Power Charge 2 hours
Battery Rechargeable Lithium-ion 3. 7 V, 200 mAh
Microphone Built-in
Transmission Distance 32.8 ft (10 meters)

WARNING: Listening to loud audio for extended periods of time may damage your hearing permanently.

Warranty Information
90-day L而ted Warranty
Territory: United States/Canada
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product (including any accessories included in the original packaging) as supplied and distributed new by an authorized retailer is warranted by MCG Innovation Inc.
to the original consumer purchaser against defects in materials and workmanship (“Wa「ranty”) as follows:
To obtain warranty service

  • Visit OU「website at WWW.MCG/NNOVATIONS.COM
  • Click on Product Support
  • Select the Brand of your device
  •  Select Service Request and fill out the form to begin your inquiry

Your product will be repaired or replaced, at ou「 option, to「 the same 0「 simila「 model of equa value if examination by the se「vice cente「 dete「mines this p「oduct is defective. Products received damaged as a 「esult of shipping will requi「e you to file a claim with the carrie「.
Warranty service not provided
This war「anty does not cove「 damage resulting from accident, misuse, abuse, imprope「installation or operation, lack of reasonable ca「e, unauthorized mod巾cation including software modifications such as the installation of custom firmware This warranty is voided in the even any unauthorized pe「son opens, alte「SO「 「epai「s this p「oduct All products being returned to the authorized service center for repair must be suitably packaged

FCC Information

This device complies with Part 15 of the FCC Rules
Caution: Any changes or mod巾cations not expressly approved could void the use「’sauthority to ope「ate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or telev1s1on reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and 「ece1ve「
– Connect the equipment into an outlet on a ci「cuit different from that to which the receiver is connected
– Consult the dealer or an experienced radio厅V technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi廿ons: (1) This device may not cause harmful interfe「ence, and (2) this device must accept any interference received, including interference that may cause undesired operation
Radiation Exposure Information
This device has been evaluated to meet gene「al RF exposure 「equi「ements The device can be used in portable exposure conditions without restriction

BRILLIANT INNOVATIONS® NAME AND LOGO ARE
REGISTERED TRADEMARKS OF MCG INNOVATIONS INC.
MANUFACTURED AND MARKETED UNDER LICENSE
©2023 ALL RIGHTS RESERVED.
WWW.MCGINNOVATIONS.COM
MADE IN CHINA
心WARNING: CANCER AND REPRODUCTIVE HARM WWW.P65WARNINGS.CA.GOV

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

brilliant User Manuals

Related Manuals