XPOtool 61750 3-Door Mailbox System User Manual
- June 12, 2024
- XPOtool
Table of Contents
User’s Manual
3-Door Mailbox System
60000–60002, 61750, 61758, 61767
Illustration similar, may vary depending on model
61750 3-Door Mailbox System
Please read and follow the operating instructions and safety information prior
to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating manual, nor
in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to
ensure that this operating manual is complete, accurate, and up-to-date,
errors cannot be ruled out entirely. If you have found an error or wish to
suggest an improvement, we look forward to hearing from you. Send us an e-mail
to:
service@wiltec.info or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop: https://www.wiltec.de/docsearch
Our postal address is: WilTec Wildanger
Technik GmbH Königsbenden
12 52249 Eschweiler – Germany
To return your goods for exchange, repair, or other purposes, please use the
following address. Attention! To allow for a trouble-free complaint or return,
it is important to contact our customer service team before returning your
goods. Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249
Eschweiler – Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
Technical drawing and parts list
| N2 | Name | N2 | Name |
|---|---|---|---|
| 1 | Mailbox | 6 | Spacer |
| 2 | Frame | 7 | Ring covers |
| 3 | Cross bar | 8 | Floor screw |
4
5| Key and lock| g
I no| Cross bar screw
Name plate| Spacer screw
Assembly instructions
Choose a suitable location to place your mailbox system. Make sure that the surface is level and that you can anchor the frame firmly with the floor screws. We recommend that you assemble the mailbox close to where it is to be installed.
- Push the ring covers (7) onto the frame rods (2). Check that the ring is pointing in the correct direction (see fig. 1).
- Connect the frame (2) and the cross bars (3) using the screws (9). Leave the assembly loose and do not fully tighten the screws yet.
- Place the frame in the location that you have chosen and mark the mounting holes for the intended location (lift the ring covers todo this).
- Set the bracket aside and drill holes at the marked locations. Then you can attach the frame (2) with the floor screws (8).
- Now attach the mailboxes (1) with the spacers (6) between the bars of the frame (2). Use the spacer screws (10) for this.
- Now tighten all the screws and finally attach the name tags (5) to the desired locations.
Technical specifications
| 60000| 6000i| 60002| 61750| 161758| 161767
---|---|---|---|---|---|---
Total dimen-
sions (mm)| 270 x 385 x 354
Dimensions of foot (mm)| 1200 x 50| 1200 x 50| 1200 x 50| 1195 x 49| 1195 X
49| 1195 X 49
Number of in-
dividual boxes| 3
Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH.
https://www.naturewater.eu
The Tool Experts
Item 60000–60002, 61750, 61758, 61767
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>