KEITHLEY 2280S-32-6 Bench Power Supply User Guide

KEITHLEY 2280S-32-6 Bench Power Supply User Guide

GENERAL PURPOSE POWER SUPPLIES

SPECIAL PURPOSE POWER SUPPLIES

ELECTRONIC LOADS

SINGLE OUTPUT PROGRAMMABLE POWER SUPPLIES

Selection Chart by Voltage and Current Outputs

Selection Chart by Voltage and Current Outputs­ Exploded View

Series 2200

Single-channel, Low-noise, Programmable Power Supplies

Designed for Benchtop and Automated Test Applications

2200 Features

■ Linear power supply with low ripple and noise
■ Power up to 150 W
■ 0.03% voltage programming accuracy
■ 0.05% current programming accuracy
■ 1 mV / 0.1 mA programming resolution, high precision power
supply for testing low power components
■ Remote sense function maximizes output voltage accuracy
at the DUT
■ List mode supports up to 80 steps to improve ATE test efficiency
■ 2200 Series supplied with USB and GPIB interfaces
■ Three-year warranty
■ KickStart Software support

The 2200 Series programmable power supplies have excellent accuracy for R&D and manufacturing testing of a wide range of components, subassemblies, and end products .

Series 2220/2230

Two or Three Channels, Low Noise, Programmable Power Supplies Designed

for Benchtop Applications

Series 2220/2230 Features

■ Two or three outputs
■ Linear power supply with low ripple and noise
■ All channels are isolated and can be controlled independently to maximize flexibility
■ All channels have remote sensing to ensure maximum voltage accuracy at the DUT
■ Two 30 V channels can be connected in series or parallel and the display shows total output voltage and current
■ 0.03% voltage programming accuracy and 0.1% current programming accuracy
■ Three-year warranty
■ KickStart Software support

Series 2220/2230 Multi-Channel Power Supplies are excellent for use in student labs, R&D, and test labs. They provide 2 or 3 channels of isolated, high quality power to one or multiple DUTs.

Use the series and parallel modes to double voltage or current output. The supply ensures that both channels share the load equally; and, the supply displays the total voltage output, the current output, and the control mode being used.

2231A-30-3

Triple-Channel DC Power Supply

Designed for Benchtop Applications

2231A-30-3 Features
■ Three independent and adjustable outputs in one instrument
■ Power up to 195 W
■ 0.06% voltage programming accuracy
■ 0.2% current programming accuracy
■ DC power with less than 5 mVp-p noise
■ Simultaneous display of all three outputs
■ Double output levels by connecting the two 30 V channels in series or parallel
■ Store 30 setups
■ Turn off any output with a programmable timer
■ Control from a PC with optional USB interface
■ Three-year warranty
■ KickStart Software support

The 2231A-30-3 is a highly cost-effective power supply with 195 W of power for student laboratories and laboratory R&D use .

Series 2230

High Power, 3-Channel, Programmable Power Supplies

For Design and Test of high power components and circuits

Series 2230 Features
■ One 195 W model and two 375 W models
■ 195 W model has two 30 V, 3 A channels and one 5 V, 3 A channel
■ 375 W models have two 30 V, 6A channels or two 60 V, 3 A channels and one 5 V, 3 A channel
■ All channels are independently controlled and are isolated to power a wide range of test setups
■ All channels have remote sensing so that the programmed voltage is accurately applied to the load
■ Set and monitor output voltages with 0.03% basic accuracy and 1 mV resolution
■ Monitor load current with 0.1% basic accuracy and 1 mA resolution
■ Low noise, linear regulation with <1 mVrms ripple and noise
■ Combine channels in series to output as high as 60 V and
in parallel with two or three channels to create capacity as high as 15 A (2230-30-6)
■ Voltage and current outputs of three channels are displayed simultaneously for immediate observation of each output state
■ USB and RS-232 interfaces and rear panel connections for automated test convenience
■ KickStart Software support

Power two isolated circuits with isolated output channels .
2230-30-3 TRIPLE CHANNEL DC POWER SUPPLY

Easily test a bipolar circuit over its operating voltage range using the tracking function so both the +voltage and the ­ voltage change together .

High Power 3-Channel Power Supplies

Series 2280S

Precision Measurement, Programmable Power Supplies

Designed for Current Drain Analysis

The Series 2280S Precision Measurement Power Supply helps R&D and test engineers easily perform current drain analysis on low power products.

Series 2280S Features

■ 6½-digit DMM measurement capability to observe load currents from 100 nA to 6 A
■ High speed sampling capability, for capturing load current pulses as narrow as 140 µs
■ 192 W linear power supply with low ripple and noise and <50 µs, fast transient response
■ Output list function
■ Programmable voltage slew rate simulates supply rise time conditions
■ GUI with waveform display of output current and voltage
■ GPIB, USB, and LAN (LXI) interfaces
■ Three-year warranty
■ KickStart Software support

Series 2260B

Single-Channel Wide Range, Programmable Power Supplies

Designed for Automated Test and Benchtop Applications

Series 2260B Features
■ Single output, high power density, system power supply
■ 360 W, 720 W and 1080 W versions with voltage up to 800 V and current up to 108 A
■ Programmable voltage or current rise and fall times preventing
damage from inrush current to low impedance loads
■ Constant current priority setting reduces voltage and current
overshoot when powering LEDs
■ Simulate a battery’s output with a programmable output resistance
■ Choose from analog control, USB, LAN, or an optional GPIB
interface for automated control
■ Save bench and test system space: six 71mm wide 360 W units
or three 142 mm wide 720 W units or two 214 mm wide 1080 W
units fit in a standard rack width
■ Ability to combine two of same model in series or three in parallel to increase voltage / current
■ Three-year warranty
■ KickStart Software support

The Series 2260B Programmable DC Power Supplies provide plenty of power for automated environmental test systems, life testing systems, and production test systems . The programmable slew rates minimize inrush current to protect DUTs, especially for LED product test and switch-mode power supply test .

2281S

Precision DC Supply and Battery Simulator

Dynamic battery simulation using a battery model

2281S Features
■ Battery simulator
– Simulate a battery based on a dynamic battery model
– Dynamic and static simulation modes to simulate
battery output
– Graphical display of capacity and battery voltage
■ Battery test instrument
– Create a battery model based on a rechargeable battery’s charge cycle
– Test battery capacity
– Monitor V, I, R and Amp-Hour data
■ Precision power supply
– 6½-digit DMM measurement capability to observe load
currents from 100nA to 6A
– High speed sampling capability, for capturing load current pulses as narrow as 140μs
■ GPIB, USB, and LAN/LXI interfaces
■ Three-year warranty
■ KickStart Software support

Series 2300

Fast Transient Response and Battery Simulating Power Supplies

Designed for Production testing of portable, battery-operated products

Series 2300 Features
■ Variable output resistance for simulating a battery’s output response (2302, 2306-LAN, and 2308)
■ Ultra-fast response to large load current changes such as transmit currents
■ Sinks current to simulate a discharged rechargeable battery
■ 100 nA current measurement sensitivity
■ Single- and dual-channel models, second channel simulates a battery charger
■ Built-in digital voltmeter
■ GPIB programmable
■ LAN communication (2306-LAN only)
■ KickStart Software support (2306-LAN only)

The 2303, 2306-LAN, and 2308 have a programmable output resistance, which allows them to simulate the output of a real battery, a capability that conventional power supplies do not have . The voltage output response of a lithium ion battery to a load current burst is shown in the figure on the left . The figure on the right shows the voltage output of the 2308 with its output resistance programmed to be equivalent to the internal resistance of the Lithium Ion battery . The 2308’s output is nearly identical to the battery’s output .

Series 2300 Specialized DC Power Supplies

Series 2290

High Voltage Power Supplies

Designed for High voltage breakdown testing and leakage current testing on high power devices

Series 2290 Features
■ 5000 V and 10,000 V models
■ µA current sensitivity
■ Low noise, <1 Vrms for the 10 kV model and <3 mVrms for the 5 kV supply
■ Safety interlock controls the high voltage output
■ GPIB programmable

Series 2380

Programmable DC Electronic Loads

Designed for Benchtop and Automated Test of Power Conversion Devices

Series 2380 Features
■ 200 W, 250 W, and 750 W models
■ Supports up to 500 V or 60 A
■ Constant current (CC), constant voltage (CV), constant resistance (CR),and constant power (CP) operating modes
■ LED simulated load test mode for testing LED drivers
■ Battery discharge mode for battery characterization
■ Dynamic mode with the cycle rate up to 25 kHz
■ Readback voltage and current resolution down to 0.1 mV and 0.01 mA
■ Voltage rise time and fall time measurement
■ Current monitor function
■ List mode
■ GPIB, USB, and RS-232 interfaces

Test power supplies to ensure they conform to the latest efficiency standards with the Series 2380 Electronic Loads and the PA3000 Power Analyzer . Use the Series 2380 Electronic Loads to test the power supplies over a wide range of loads .

Series 2380 Programmable DC Electronic Loads

Contact Information:
Australia 1 800 709 465
Austria 00800 2255 4835
Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Belgium 00800 2255 4835
Brazil +55 (11) 3530-8901
Canada 1 800 833 9200
Central East Europe / Baltics +41 52 675 3777
Central Europe / Greece +41 52 675 3777
Denmark +45 80 88 1401
Finland +41 52 675 3777
France 00800 2255 4835
Germany 00800 2255 4835
Hong Kong 400 820 5835
India 000 800 650 1835
Indonesia 007 803 601 5249
Italy 00800 2255 4835
Japan 81 (3) 6714 3086
Luxembourg +41 52 675 3777
Malaysia 1 800 22 55835
Mexico, Central/South America and Caribbean 52 (55) 88 69 35 25
Middle East, Asia, and North Africa +41 52 675 3777
The Netherlands 00800 2255 4835
New Zealand 0800 800 238
Norway 800 16098
People’s Republic of China 400 820 5835
Philippines 1 800 1601 0077
Poland +41 52 675 3777
Portugal 80 08 12370
Republic of Korea +82 2 565 1455
Russia / CIS +7 (495) 6647564
Singapore 800 6011 473
South Africa +41 52 675 3777
Spain 00800 2255 4835
Sweden 00800 2255 4835
Switzerland 00800 2255 4835
Taiwan 886 (2) 2656 6688
Thailand 1 800 011 931
United Kingdom / Ireland* 00800 2255 4835
USA 1 800 833 9200
Vietnam 12060128

• European toll-free number. If not
  accessible, call: +41 52 675 3777
  Rev. 02.2022

Find more valuable resources at TEK .COM
Copyright © Tektronix . All rights reserved . Tektronix products are covered by U .S . and foreign patents, issued and pending . Information in this publication supersedes that in all previously published material . Specification and price change privileges reserved . TEKTRONIX and TEK are registered trademarks of Tektronix, Inc . All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies . 080922 SBG 1KW-60035-3

References

• Test and Measurement Equipment | Tektronix

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>