FEIT Electric T1296 T12 Plug and Play Linear Lamp Instruction Manual
- June 4, 2024
- Feit Electric
Table of Contents
FEIT Electric T1296 T12 Plug and Play Linear Lamp Instruction Manual
Safety information
LEASE READ THESE INSTRUCTIONS AND WARNINGS PRIOR TO INSTALLATION.
THIS LAMP IS INTENDED TO WORK WITH THE EXISTING MAGNETIC BALLAST IN YOUR
LIGHTING FIXTURE.
THIS IS A PLUG AND PLAY LAMP, NO ELECTRICAL MODIFICATIONS ARE NEEDED.
This LED tube is intended to replace fluorescent tube lamps with ANSI
designation 60W/96T12 and 75W/96T12 with Fa8 base.
This product may not be compatible with all ballasts. For more information
about ballast compatibility please visit www.Feit.Com.
WARNING: Check the luminaire
(fixture) carefully before installing the lamp. Ensure the electrical
lampholders (sockets) are not damaged and will make firm contact with the lamp
pins.
CAUTION: Risk of fire – If lamp
or luminaire exhibit abnormal operation (buzzing, flickering, minimal or no
light, etc.), immediately turn off power and contact us for more information.
CAUTION: Risk of fire –
Suitable for damp locations. Do not use with dimmers. Do not touch lamp pins
to the metal housing when installing.
WARNING: Do not install this in
a pre-heat luminaire (fixture), often with external starters.
-
Follow all safeguards sBted in the manual, in addition to normal safety precautions in working with electrical devices.Always follow basic safety precautions to reduce the risk of fire, electric shock and personal injury.
-
WARNING: RISK OF SHOCK: House electric current can cause painful shock or serions injury unless handed properly. For your safety, always remember to:
- Tum OFF the power supply atthe fuse or circuit breaker box before you install the fixture.
- Ground the fixture to avoid potential electric shock and to ensure reliable starling.
- Double check all connections to be sure they are tight and correct.
- Wear rubber sole shoes and work on asturdy ladder.
- Do not touch with wet hands.
- This device is not intended for use with emergency exits or emergency lights.
- Do not make or alter any open holes in the enclosure of wiring or electrical components during installation.
-
This fixture is designed for use in a circuit protected by a fuse or circuit breaker.
lt is also designed to be installed in accordance with local electrical codes. If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code. -
Avoid looking directly into the LED light.
-
WARNING: RISK 0F CUTS: To present wiring damage, abrasion or cuts, do not expose wiring to edges of sheet metal or other sharp objects and wear gloves.
-
Account for small parts and destroy packaging material, as these may be hazardous to children.
SAVE THESE INSTRUCTIONS
Thank you for your purchase. Questions, comments or feedback? We’d love to
hear from you.
Visit feit.com/help for support.
We appreciate the trust and confidence you have placed in Feit Electric
through the purchase of this T12 Linear Lamp.
We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home
improvement needs.
Thank you for choosing Feit Electric.
Direct Replacement Plug & Play Installation (Type A)
-
Turn off the power at the switch and fuse box or circuit breaker.
-
Remove existing fluorescent lamp(s) from the fixture. Replace with Feit Electric T1296/840/A/LEDG2 LED lamp.
-
Turn on the power at the fuse box or circuit breaker and at the switch and enjoy your new Feit Electric LED lamp.
Limited Warranty
This product is warrantied to be free Itom defects in workmanship and materials for up IO 5 years from date of purchase. If the product fails within the warranty period, please contact Feit Electric at info@feit.com, visit feit.com/conBct-us or for instructions on replacement or refund. REPLACEMENT 0R REFUND IS YOUR SOLE REMEDY. EXCEPT TO TUE EXTENT PROHIBITED BY APPMCABLE LAW, AIJY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABIMTY FOR INCIDENTAL 0R C0NSEQUEI\ITIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not dlow the exclusion of incidenBl or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal righb, and you may also have other rights which varykom state to state or province to province.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to oomply with the limits for a Clas B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses arid can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a pai1icular installation. If this equipment does cause hamful interference to radio or television reception, which can be detemined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different 1tom that IO which the receiver is connected. Consult the dealer or an experienced radia/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
HIS PRODUCT MAY NOT BE COMPATIBLE WITH ALL BALLASTS.
FOR MORE INFORMATION ABOUT BALLAST COMPATIBILITY PLEASE VISIT
WW.FEIT.COM.
Supplier’s Declaration of Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party: Feit Electric Company
4901 Gregg Road, Pico Rivera, CA 90660, USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>