soundcore Motion Boom Plus Portable Speaker User Manual
- June 12, 2024
- Soundcore
Table of Contents
soundcore Motion Boom Plus Portable Speaker
Product Information
The Soundcore Motion Boom Plus is a portable speaker that delivers powerful sound and convenient features. It is equipped with various buttons for easy control, including the Bass up button, Bluetooth button, Volume down button, Multi-function button, Volume up button, Power button, PartyCast button, and an Audio port. The speaker also has a USB-C port for charging in and a USB-A port for charging out. It supports Bluetooth connectivity and TWS (True Wireless Stereo) mode, allowing you to pair two identical Motion Boom Plus speakers for stereo sound. Additionally, it supports PartyCast mode, enabling wireless connection with up to 100 identical Motion Boom Plus speakers.
Product Usage Instructions
Charging:
- Connect the speaker to a power source using the USB-C port for charging in.
- The LED indicator will flash red when the battery is low, steady red when being charged, and steady white when fully charged.
Powering On/Off:
- To power on the speaker, press the Power button once. The LED indicator will turn steady white.
- To power off the speaker, press and hold the Power button for 2 seconds. The LED indicator will turn off.
- The speaker will automatically power off after 20 minutes if no device is connected.
This speaker will power off automatically after 20 minutes if no device is connected
Using Your Speaker – Bluetooth Mode:
- Press the Bluetooth button once to enter Bluetooth pairing mode. The LED indicator will flash blue.
- Connect your Bluetooth-enabled device to the speaker. Once connected, the LED indicator will turn steady blue.
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
- This speaker can pair with 2 mobile devices via Bluetooth. To pair with another Bluetooth device, press the Bluetooth button once to re-enter Bluetooth pairing mode.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
- Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button once to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical Motion Boom Plus speakers can pair up with each other for true
wireless stereo sound. In TWS mode, connect either one of the two speakers
with your mobile device so that both speakers play the same audio (one as L
channel and the other as R channel).
On both Soundcore speakers, press and hold the Bluetooth button for 2 seconds
to enter TWS pairing mode.
- On both Soundcore speakers, press and hold the Bluetooth button for 2 seconds to enter TWS pairing mode. The LED indicator will flash white.
- Connect one of the two speakers to your mobile device. Both speakers will play the same audio, with one as the left channel and the other as the right channel.
- TWS (True Wireless Stereo) Mode
- Two identical Motion Boom Plus speakers can pair up with each other for true wireless stereo sound. In TWS mode, connect either one of the two speakers with your mobile device so that both speakers play the same audio (one as L channel and the other as R channel).
- On both Soundcore speakers, press and hold the Bluetooth button for 2 seconds to enter TWS pairing mode.
To exit the TWS mode, press and hold the Bluetooth button for 2 seconds.
PartyCast Mode
You can wirelessly connect up to 100 identical Motion Boom Plus speakers
together.
- Connect a Motion Boom Plus speaker with your smartphone or tablet as the primary speaker.
- Press the PartyCast button once on the primary speaker and all the additional speakers to enter the pairing mode.
When successfully connected, you will hear a prompt sound.
| Press once| Enter PartyCast pairing mode
---|---|---
0| Steady white| PartyCast pairing
0| Steady white| PartyCast connected
When PartyCast mode is successfully entered:
- Any Motion Boom Plus speaker can connect with a speaker supporting PartyCast 1.0 by pressing the PartyCast button twice.
- To exit PartyCast mode, press the PartyCast button once on any speaker.
PartyCast Mode:
- Connect a Motion Boom Plus speaker with your smartphone or tablet as the primary speaker.
- Press the PartyCast button once on the primary speaker and all the additional speakers to enter pairing mode. When successfully connected, you will hear a prompt sound.
Button Controls:
- Play/Pause: Press the Multi-function button once.
- Next track: Press the Multi-function button twice.
- Previous track: Press the Multi-function button three times.
- Adjust volume: Press the Volume up or Volume down button.
- Turn BassUp on/off: Press and hold the Bass up button.
- Answer/End a call: Press the Multi-function button once.
- Answer a second incoming call and put the current call on hold: Press and hold the Multi-function button for 2 seconds.
- Reject an incoming call: Press the Multi-function button twice.
- Switch between a call on hold and an active call: Press the Multi-function button three times.
- Activate Siri or other voice assistant software: Press and hold the Multi-function button for 2 seconds.
Soundcore App:
The Soundcore App is available for download on Google Play and the Apple App Store.
Specifications:
- Power input
- Battery capacity
- USB output
- Audio output power
- Charging time
- Playtime (varies by volume level and music content)
- Waterproof level
- Bluetooth version
- Bluetooth range
At a Glance
- 1. Bass up button
- 2. Bluetooth button
- 3. Volume down button
- 4. Multi-function button
- 5. Volume up button
- 6. Power button
- 7. PartyCast button
- 8. USB-C port for charging in
- 9. USB-A port for charging out
- 10. Audio port
Charging
Charge your Speaker
- Use a certified USB-C cable and charger to prevent any damage.
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
- Disconnect this speaker from a charger when fully charged. Do not charge for extended periods.
Charge your USB Devices
Charge your USB devices through the USB-A charging port.
Soundcore App
Download the Soundcore app to enhance your experience.
Product information: Check the product name and software version, or read the
user manual.
Firmware update: You will be informed once a new version of firmware is
detected when you connect the speaker with the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the
buttons on the speaker.
EQ settings: There are 6 EQ settings you can choose from in the app to
optimize your experience while enjoying different music genres.
- Soundcore Signature: Normal EQ mode with well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Treble Boost: High frequencies are enhanced.
- Balance: No enhancement for high-frequency and low-frequency sounds.
- Custom: Customize the EQ setting to suit you in the app.
- BassUp: Turn on BassUp to enhance the low-frequency sound.
Set Auto-power off time: Set an auto-power off time (5/10/30/60 minutes, 30 minutes by default), the speaker will automatically power off when the time is up. Voice prompt: Mute or restore the voice prompt while powering on/off.
Specifications
Specifications are subject to change without notice.
| Power input | 5V __ 3A |
|---|---|
| Battery capacity | 13400 mAh |
| USB output | 5V __ 2.1A |
| Audio output power | 80 W |
| Charging time | 5.5 hours |
| Playtime (varies by volume level and music content) | Up to 20 hours |
| Waterproof level | IP67 |
| Bluetooth version | 5.3 |
| Bluetooth range | 50 m / 164 ft |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>