MAXIM LIGHTING 3030 Cabana 1-Light Outdoor Post Mount User Guide
- June 12, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 3030 Cabana 1-Light Outdoor Post Mount
Product Information
This product is a lamp that requires assembly. It is important to read the instructions carefully before assembling the product. The package contains various components that need to be handled with care, so it is recommended to use a sharp tool like a cutter knife to open the package. Ensure that all packaging materials are carefully removed and retained for future use. Keep all hardware parts and packaging out of reach of small children. It is important to choose a clean, level, and spacious area for assembly. Avoid hard surfaces that may damage the product. Make sure you have all the required contents for complete assembly. When lifting the product, take care and assemble it close to where you intend to position it. Avoid over-tightening the screws and bolts as this may damage the threads. Do not let children play with this product to prevent any accidents. Keep any packaging materials away from children to avoid the risk of suffocation. For non-English speakers, the instructions are also provided in French (Lire attentivement les instructions avant d’assembler le produit) and Spanish (Lea atentamente las instrucciones antes de ensamblar el producto).
Product Usage Instructions
- Carefully read through the instruction sheet before starting the assembly process.
- Before assembling or cleaning the product, make sure t disconnect it from the power source to avoid the risk of shock.
- Switch off the lamp and unplug it before replacing the bulb or cleaning it. Allow the bulb to cool down before handling.
- Only use the recommended bulb type and ensure that you do not exceed the maximum wattage specified. Using higher-wattage bulbs can cause a fire hazard. Do not plug in the product if the cord is torn or frayed.
- If you plan to use the lamp outdoors, caulk around the fixture with silicone sealant to prevent water intrusion.
- For cleaning and maintenance, apply high-quality car wax regularly to protect the metal from environmental damage.
- Clean the lamp using a soft cloth and mild detergent. Avoid using abrasive cleaners that may damage the surface.
- Every 90 days, make sure to tighten all screws fully to ensure the stability of the lamp. Prolonged exposure to heat sources may cause glazing, melting, scorching, or color fading.
Follow these instructions to ensure the safe and proper usage of the lamp.
Before Getting Started
Read the instructions carefully prior to assembling
the product.
When you open the package with a sharp tool
like a cutter knife, be careful not to damage the components inside.
Carefully remove all packaging materials and
retain for future use.
Keep all hardware parts and packaging out of
reach of small children.
Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for
complete assembly.
Take care when lifting. Assemble the product in
close proximity to where you intend to position the item.
Do not over tighten the screws and bolts as this
may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do
not exceed the maximum wattage as it could cause fire.
Do not plug the product in if cord is torn or frayed.
For outdoor use, caulk around fixture with silicone sealant to prevent
water intrusion.
Cleaning & Maintenance
Apply a high quality car wax to the fixture regularly to protect from environmental factors that can damage the metal.
Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
Before getting started, ensure the package contains the following components:
Caulk around the backplate where the fixture meets the wall leaves a hole at the bottom to allow water to escape.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>