Mickaosoun WMF001 Wireless UHF Microphone User Manual

Mickaosoun WMF001 Wireless UHF Microphone

Product Information

• Product Name: Mickaosoun Wireless UHF Microphone
• Model Numbers: WMF001, WMF001-2
• Email for Support: Mickaosoun@outlook.com.

Product Usage Instructions

1. Plug the receiver into the microphone hole of the amplifier.
2. If the receiver signal plug is 6.3mm and the microphone input hole of the loudspeaker equipment is 3.5mm, use the included conversion plug.
3. Attach the conversion plug to the receiver and plug it into the microphone jack of the amplifying equipment.
4. Search for the Bluetooth name “Mickaosoun” on a smart device (e.g., mobile phone).
5. Connect the smart device to the loudspeaker device to send the sound of the smart device to the loudspeaker device. Note that call sounds cannot be sent.

Troubleshooting: No troubleshooting steps provided in the manual.

Product Parameters:
No product parameters provided in the manual.

Package Contents:

• 2 x Microphones (CHA, CHB)
• 1 x Receiver
• 2 x Anti-roll pad
• 1 x 3.5mm adapter
• 1 x Charging cable
• 1 x User manual

FCC Warning Statement:
No FCC warning statement provided in the manual.

If you have any questions, please feel free to contact us.

• E-mail: Mickaosoun@outlook.com.

Product introduction

Product introduction:
The wireless microphone adopts UHF frequency band transmission, which has the characteristics of long transmission distance, strong anti-interference ability, short delay time and clear sound quality. Easy to operate. The whole machine has low power consumption and long endurance, which can be widely used in teaching, conference, stage performance and other occasions

Attention:
Please read all warnings carefully before use, and keep this instruction manual for future use

Product features

1. UHF frequency band wireless transmission, no cable winding, good anti-interference performance, signal sound quality is clear
2. One button to power on/off, volume control, easy to operate
3. The LED screen display is easy to see and controll
4. With Bluetooth receiving function, more extensive application

Product description

Microphone

(2)   Adjust volume: Short press to adjust volume.there has 5 levels, level 8-12 in the display

|
3| Battery cover| Turn on the reverse clock and tighten the battery cover clockwise|
4| Frequency switch| (1)  In case of interference with other devices or greater environmental interference, the microphone frequency can be changed and adjusted by pressing this button.

Total 15 channels

(2) Press this button to adjust the frequency, the receiver will flash. After the frequency is matched, the indicator light will stay on.

| In normal case there is no need to adjust the channel
5| Battery slot| Install two AA 1.SV batteries of the same brand correctly according to the polarity mark| (1)   Don’ t use old and new battery at the same time

(2)  Recommend AA alkaline batteries

(3)  Not Recommend rechargeable

battery ( Low voltage of 1.2V affects the working time)

6| Screen| (1)   The working state of the microphone, including power, signal, frequency and channel information

(2)   If there is no keyless operation, it will enter power-saving mode and only display power information. Press any key to reactivate the display

| Needed to change battery whenEll turns to and flash

charge if cannot power on
2| Power button| (1)  Press and hold to turn on, long press to turn off.

(2)Bluet:ootlh button: In the open state, press the butlon to turn on/off the Bluetooth function, and the B,T will light up when open

|
3|

PWR.CHR indicator

| (1) Bietrun White: the receiver is turned on;

(2) Red light: Flashing means iinsuffici,ent battery and needs to be charged:When charging, the red light is on, and it goes out when it is full (if charging with power on, light will be white after fully charged).

4| Amie connect indicator light| Light on: A miic connect to receiver successfully| The flashing light indicate5 that the connection siginal is not stable. Please shorten the di5tance between the microphone and receiver to r,educe the spatial banier
5|

BT bluetooth indicator

| (1)   flash: Bluetooth state is waiting to be connected. connect in the Device Bluetooth li5t “Mickaosoun •

(2)  light on: Blu1etooth connect successfully Light off: Bluetootih tum off

|

The receiver will turn on Bluetooth by default every time it is turned on. Short pres5 the power button to turn off

6| B mic connect indicator light| Lfght on: B mic is connected! to the receiver successfullly| The flashiing light indiica,tes that the connection signal is not stable. Please shorten the distance between the microphone and receiver to reduce the spatial barrier
7| Adapter| The receiver can lbe p’lugged into a sound amplifying device with only a 3.5mm MIC input interface|

How to use

1. Plug receiver into mic hole of amplifier

2. The receiver signal plug is 6.3mm, and the MIC input hole of some loudspeaker equipment is 3.5mm, which can be used in conjunction with the attached conversion plug
   Attention:
   Due to the design of the loudspeaker equipment, most of the “Line in” or “AUX” ports of the loudspeaker equipment are not compatible with the receiver, which is not caused by this product.

3. The receiver of this product can be used independently as a Bluetooth receiver, so that the PA equipment without Bluetooth function has Bluetooth capability. After turning on the receiver, plug it into the MIC jack of the amplifying equipment, search for the Bluetooth name “Mickaosoun” and connect with a smart device such as a mobile phone to send the sound of the smart device to the loudspeaker device (call sounds cannot be sent).

How to fix problems

Product parameters

Package Contents

• 2XMic (CHA, CHB)
• 1X receiver
• 2X anti-roll pad
• 1X 3.5mm adpater
• 1X charging cable
• 1X user manual

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>