IBE T300 Table Top Mini Dough Moulder Instruction Manual

IBE T300 Table Top Mini Dough Moulder

Product Information

The Table-top Mini Dough Moulder T300 is a compact and versatile machine designed for shaping dough in professional bakeries. It is manufactured by International Bakery Equipment Pty Ltd and comes with a comprehensive instruction manual.

General Information

• Documentation supplied
• Contact details: International Bakery Equipment Pty Ltd, 20  Brewer Street Clontarf QLD 4019 Australia, Phone: 1300 099 011 or +61 7 3889 5700, E-Mail: sales@allaboutbakery.com.au, Web: www.allaboutbakery.com.au
• Use of this Manual : The manual provides essential information for installation, operation, and maintenance of the machine.
• Intellectual Property Rights: The manual is protected by copyright and cannot be reproduced without prior written permission from International Bakery Equipment Pty Ltd.
• Warranty Terms and Conditions: The warranty coverage is determined by I.B.E. Pty Ltd and certain conditions apply.

Specifications

• Crate Dimensions: Length (cm) 100

Product Usage Instructions

Before using the Table-top Mini Dough Moulder T300, please read the following instructions carefully:

Transport and Installation

• Transport: Ensure proper handling and transportation of the machine to prevent damage.
• Installation: Follow the provided guidelines for installing the machine correctly.
• Testing & Safeguards: Perform necessary tests and ensure all safety measures are in place before operating the machine.

Machine Operation

• Intended operation : Understand the purpose and functionality of the machine.
• Control components : Familiarize yourself with the various controls and their functions.
• S heeter operation : Learn how to operate the sheeter component of the machine.

Cleaning & Maintenance

• Cleaning: Follow the recommended cleaning procedures to maintain hygiene and prolong the machine’s lifespan.
• Maintenance: Regularly inspect and service the machine as per the maintenance guidelines provided.
• Spare parts list: Refer to the list of available spare parts for replacements if necessary.
• Exploded parts drawings : Use the provided drawings to identify and disassemble machine components for maintenance or repairs.
• Electrical diagram: Understand the electrical connections and circuitry of the machine for troubleshooting purposes.

Note: The information provided in this response is a summary. For detailed instructions and further information, please refer to the complete Table-top Mini Dough Moulder T300 Instruction Manual available at www.allaboutbakery.com.au.

MODEL: T300

Documentation supplied

• Instruction manual
• Spare Parts List
• Wiring diagrams

Contact Details
International Bakery Equipment Pty Ltd (I.B.E.)

Address:
20 Brewer Street Clontarf QLD 4019

Australia

Phone: 1300 099 011 or + 61 7 3889 5700
E-Mail: sales@allaboutbakery.com.au
Web: www.allaboutbakery.com.au

Use of this Manual
Please read carefully the information supplied in this manual before installing, operating or carrying out maintenance on this machine. This manual must be kept in good condition and stored where it can be easily found when required.

Intellectual Property Rights
This manual contains copyright information. All rights are reserved. No part of this manual can be reproduced or photocopied without prior written permission of International Bakery Equipment Pty Ltd. Permission to use this documentation has only been given to the customer who this manual has been supplied as part of the machine’s equipment and only for the purpose of installation, operation and maintenance of the machine to which the manual refers. International Bakery Equipment Pty Ltd declares that the information contained herein is in accordance with the technical and safety specifications of the machine to which the manual refers. International Bakery Equipment Pty Ltd will not be held responsible for direct or indirect damage or injury to people or objects resulting from the misuse of this documentation or the machine for which it has been intended. The manufacturer reserves the right to introduce technical modifications or improvements both to the documentation and to the machines without prior notice. The information contained herein refers in particular to the machine specified in section 1.7 “Machine identification details “.

Warranty Terms and Conditions

• Warranty becomes effective from date of delivery.
• Warranty claims may be made by telephone, letter, email or fax.
• However, all verbal claims must be confirmed in writing. I.B.E. Pty Ltd Reserves the right to require return of all claimed defective parts.
• I.B.E. Pty Ltd will ship the part(s) in an expeditious manner as requested.
• Mechanical and Electrical parts are warranted for a period of 12 months from date of delivery.
• During the first 12 months, I.B.E. Pty Ltd will reimburse the Authorized Agent or Purchaser for the cost of reasonable labour during normal working hours, 8.00a.m. –5.00p.m., to remove the failed part(s) and install the replacement(s). After 12 months all charges will be the Purchasers responsibility.
• After the initial 12 months warranty, any replacement parts are warranted for 3 months excluding labour.
• This Warranty may not be changed or modified and is not subject to any other Warranty expressed or implied by any other Agent, Dealer or Distributor unless approved in writing by I.B.E. Pty Ltd in advance of any claim being filed. This Warranty gives you specific legal rights which vary from State to State.

Note:
I.B.E. Pty Ltd reserves the right to make the final decision on all Warranty coverage questions. The decision of the Company is final.

What is covered under this Warranty:

• Parts that fail due to defects in material workmanship.
• Parts that fail due to faulty assembly by I.B.E. Pty Ltd
• Parts that fail due to improper set-up by I.B.E. Pty Ltd

What is not covered under this Warranty:

• Parts that fail due to improper usage or overloading of the machine.
• Parts that fail due to lack of maintenance.
• Parts that fail due to abuse, misuse or modification.
• Mixer attachments – Bowl, whisk, beater and/or hook.
• Normal wear parts, such as, Conveyor belts, ‘v’ belts, ‘o’ rings and scraper and slicer blades. The Warranty on these parts is, they will be in satisfactory operating condition at time of delivery and initial start-up. Claims in such parts must be made immediately.
• Loss of time, potential revenue and/or profits.
• Personal injury or property damage resulting from the operation of the machine.

Specifications

Crate Dimensions:

Machine Specifications

Model

|

Motor H.P.

|

Dimensions

|

Weight Kg (Net)

---|---|---|---
L

cm

| W

cm

| H

cm

T300

|

¼

|

90

|

58

|

49

|

60

Power Supply Details:
Single Phase, 10amp 3-pin plug top (supplied)

Note:
The Manufacturer will not be Liable for electrical defects, breakdowns or malfunctioning of the machine for the non compliance with the power supply stated.

Machine Identification Details

• Type: Table-Top Mini Dough Moulder
• Model: T300

Position of Serial Number Identification Plate (Fig 1.1)

Note:
When requesting spare parts please state the serial number found on the serial number identification plate.

Main Machine Components

Safeguards
This machine has been fitted with safeguards to ensure safe operation of this machine, in accordance please ensure the following;\

• Do not place foreign objects on or under the belts.
• Ensure training in the safe operation of this machine is carried out with all operators.
• Do not wear loose clothing, ties, chains, or watches that could get caught into the moving parts of the machine.
• Ensure safeguards are in operable order before using the machine on a daily basis.
• Tampering with the safety devices creates hazards for the machine operator, for which International Bakery Equipment Pty Ltd or its agents will not be liable..

Note:
In the event that one or more of the safe guards do not operate or fail contact your supplier immediately. DO NOT OPERATE THE MACHINE. Tampering with or modifying the machine will void warranty.

Emergency Stop Button.
The machine is equipped with a red emergency stop button located on the right panel of the machine and allows the operator to stop the machine in case of emergency see Fig 1.2

Limit switched in-feed chute.
The front of the in-feed chute is fitted with a limit switch emergency stop bar, when the bar is pressed down the machine will stop immediately; the green start button must be pressed for the machine to operate again. (Fig 1.3)

Transport and Installation

Transport

The instructions given in this section must be carefully followed when transporting the machine. This operation may include but is not limited to the following:

• Storage of the machine
• Installation of the machine
• The machine comes supplied in a secure packing crate which needs to be handled with care to protect the machine.
• When being transported the machine crate should be secure to the transporting veichcle using approved tie down straps to avoid the machine tipping over.
• The machine should not be placed on top of other items during transport.
• When lifting the machine ensure all persons are at a safe distance.
• The forklift operator is to hold the appropriate qualifications.
• Do not climb on or place body under machine crate when it is being lifted from the ground or transport veichcle.
• When lifting the machine crate ensure forks are spread to the maximum width of the crate and the crate is against the cradle of the forklift (Fig2.1).

Installation

• Ensure transport crate and all protective packaging is removed.
• Carefully clean the machine using a damp clean cloth, removing dust on all surfaces.
• When the machine has been unpacked, check the condition of the machine. Any visible damage indicates that the machine has been dropped or hit by something during transport. This could lead to malfunctioning. If damage has occurred during transport it should be attributed to the carrier and International Bakery Equipment Pty Ltd or its agent should be informed immediately of the situation.
• Locate the moulder in a convenient position on a flat level bench, where the operation of the machine is safe and accessible.
• Before making the electrical connections check the specifications found in section 1.6 of this manual and ensure they match those of your electrical service.
• Make certain the electrical supply is correct and the correct breaker is in place to ensure protection from a short circuit.
• A qualified person should correct electrical connection if required.
• Train all operators in the safe operation of this machine.

Testing the safeguards
Before starting the machine, the safety devices should be checked according to the following procedure:

• Correct operation of the emergency stop bar limit switch (Fig 1.3, page.9);
  While the machine is operating press down on the front of the in-feed chute, the machine should stop immediately.

• Correct operation of the emergency stop button (Fig 1.2, page.8);
  While the machine is operating, press the emergency stop button, the machine should stop immediately.

Machine Operation

Intended Operation

This machine has been designed and manufactured for the final moulding of dough pieces for bread baguettes’, French sticks, and long rolls with the use of two sets of stainless steel rollers to express air from the dough piece, moulding chain to form the dough into a cylinder and moulding belt and pressure plate to give the desired length of the final product and to seal the seam. This machine has been designed and built to operate indoors.

**Control Components

**

Location

|

Description

|

Operation Performed

---|---|---

a

| On / Off Switch| When the green switch is pressed the power is turned on. When the red switch is pressed the power is turned off.

b

|

Pressure roller adjustment wheel

|

Sets the gap between the rollers as determined by the operator.

c

|

Emergency stop bar

|

When pressed it stops the machine completely.

d

|

Emergency stop button

|

When pressed it stops the machine completely.

e

|

Pressure Plate adjustment wheel

|

Adjusts the space between the moulding belts and pressure plate depending on the final length of the dough piece desired.

Moulder Operation
These operating procedures are to be used as a guide, as every bakeries dough consistency is different. These steps should be used to set up the T-300 to your specific product and by keeping records of the settings it will assist in the day to day operation of this machine, be aware though you may still need to fine tune the settings that you record as your dough can change i. e. longer than normal bench rest, or a slacker dough.

• Pressure roller adjustment wheel (b) closes the gap between the rollers.
• If the dough piece tears the rollers are to close, open rollers further until dough piece does not tear.
• If the dough piece is too lose and the finished baked product has air holes in it the rollers need to be brought in closer.
• Dough piece should be firm once through the rollers.
• The curling chain which lies on the top of the belt assists in forming the dough into the final shape prior to the dough piece dropping and going between the belt and the pressure board.
• If you wish to produce flat bread products the curling chain can easily be un-hooked from the front hangers while the machine is stoped and hung over the rear of the machine or removed, and the flat dough pieces picked up off the belt.
• Pressure plate adjustment wheel (e) opens and closes the gap between the belt and pressure board.
• This board determines the final length of the product and helps seal the seam of the product.
• If your product is too long open the gap wider.
• If your product is too short the gap should be brought in closer.

Cleaning &Maintanance

Cleaning

• Always turn power off at the wall and unplug machine prior to cleaning or maintenance.
• This machine should be cleaned at the end of every day, to prevent a build up of dough crumb and flour dust.
• Remove upper cover. See Fig (4.1)
• Clean any hard dough crumb from pressing rollers with a plastic scraper flour dust can be removed with a brush
• Wipe over with a damp cloth ( not dripping wet)
• While cover is off the machine it can be dusted off with a brush and wiped over with a damp cloth.
• Body of the machine can be dusted off and wiped over with a damp cloth.
• Replace upper cover.
• While cleaning the machine check for any wear on belts.
• If the machine starts operating strangely (different sound, belt slipping) during normal operation please contact a qualified technician as soon as possible

Note:
Do not use water jets or hoses to clean this machine as excess water can damage the machine, and the safe operation of the electrical components.

Maintenance

• It is recommended that this machine should be serviced once every 12 months by a qualified technician to maintain hassle free operation.
• If in the event the machine does not operate correctly it is recommended that you contact your supplier to ensure a qualified technician services the machine for you.
• It is not advisable to attempt any repairs without prior knowledge of the mechanical or electrical systems used in the manufacture of this machine, use only qualified technicians.

Note:
Any attempt to modify this machine in any way will result in the warranty being voided. Tampering with the mechanical or electrical systems in this machine will void warranty.

Spare Parts List

Exploded Parts Drawing

Electrical Wiring Diagram

www.allaboutbakery.com.au

Instruction Manual for Table-top Mini Dough Moulder T300 .

References

• Bakery Equipment - Bakery Design & Fitout

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>