IBE FABDR Fully-Automatic Bun Divider Rounder Instruction Manual
- June 12, 2024
- IBE
Table of Contents
- IBE FABDR Fully-Automatic Bun Divider Rounder Instruction Manual
- Use of this Manual
- Intellectual Property Rights
- Note:
- What is covered under this Warranty:
- What is not covered under this Warranty:
- Type: Semi-Automatic Bun Divider Rounder Model:FA BDR
- Main Machine Components
- Safeguards
- Transport and Installation:
- Transport
- Machine Operation:
- Intended Operation
- Control Components
- Dividing Rounding Operation
- 1.3 Warranty Terms and Conditions
- Cleaning &Maintanance:
- Cleaning
- Machine Operation:
- Note:
- Note:
- Maintenance
- Note:
- Spare Parts List
- Spare Parts List Continued
- Exploded Parts Drawing
- Electrical Wiring Diagrams
- Hydraulic Control System
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IBE FABDR Fully-Automatic Bun Divider Rounder Instruction Manual
Use of this Manual
Please read carefully the information supplied in this manual before
installing, operating or carrying out maintenance on this machine.
This manual must be kept in good condition and stored where it can be easily
found when required.
Intellectual Property Rights
This manual contains copyright information. All rights are reserved. No part of this manual can be reproduced or photocopied without prior written permission of International Bakery Equipment Pty Ltd. Permission to use this documentation has only been given to the customer who this manual has been supplied as part of the machine’s equipment and only for the purpose of installation, operation and maintenance of the machine to which the manual refers.
International Bakery Equipment Pty Ltd declares that the information contained herein is in accordance with the technical and safety specifications of the machine to which the manual refers. International Bakery Equipment Pty Ltd will not be held responsible for direct or indirect damage or injury to people or objects resulting from the misuse of this documentation or the machine for which it has been intended.
The manufacturer reserves the right to introduce technical modifications or improvements both to the documentation and to the machines without prior notice. The information contained herein refers in particular to the machine specified in section 1.7 “Machine identification details “.
Note:
I.B.E. Pty Ltd reserves the right to make the final decision on all Warranty coverage questions. The decision of the Company is final.
What is covered under this Warranty:
- Parts that fail due to defects in material
- Parts that fail due to faulty assembly by B.E. Pty Ltd
- Parts that fail due to improper set-up by B.E. Pty Ltd
What is not covered under this Warranty:
- Parts that fail due to improper usage or overloading of the
- Parts that fail due to lack of
- Parts that fail due to abuse, misuse or
- Mixer attachments – Bowl, whisk, beater and/or hook.
- Normal wear parts, such as, Conveyor belts, ‘v’ belts, ‘o’ rings and scraper and slicer The Warranty on these parts is, they will be in satisfactory operating condition at time of delivery and initial start-up. Claims in such parts must be made immediately.
- Loss of time, potential revenue and/or
- Personal injury or property damage resulting from the operation of the machine.
Specifications
Crate Dimensions:
Length (cm) | Width (cm) | Height (cm) | Weight (Kg) |
---|---|---|---|
92 | 83 | 185 | 520 |
Machine Specifications
Model
|
Dough Capacity Kg
Min – Max
|
Dough Dividing Weight
g
Min – Max
|
Motor H.P.
|
Dimensions
|
Weight Kg (Net)
---|---|---|---|---|---
L
cm
| W
cm
| H
cm
FA/BDR
|
900g – 3.6Kg
|
30g – 120g
|
2
|
70
|
71
|
164
|
460
Power Supply Details:
3 Phase, 10amp 4-pin plug top (supplied)
Machine Identification Details
Type: Semi-Automatic Bun Divider Rounder Model:FA BDR
Position of Serial Number Identification Plate(plate not shown) (Fig 1.1)
Note:
When requesting spare parts please state the serial number found on the serial number identification plate.
Main Machine Components
Instruction Manual for Manual Fully-Automatic Bun Divider Rounder FA/BDR
Safeguards
This machine has been fitted with safeguards to ensure safe operation of this machine, in accordance please ensure the following;
Note:
In the event that one or more of the safe guards do not operate or fail
contact your supplier immediately. DO NOT OPERATE THE MACHINE.
Tampering with or modifying the machine will void warranty.
- Do not place foreign objects in under the head of the
- Ensure training in the safe operation of this machine is carried out with all
- Do not wear loose clothing, ties, chains, or watches that could get caught into the moving parts of the machine.
- Ensure safeguards are in operable order before using the machine on a daily
- Tampering with the safety devices creates hazards for the machine operator, for which International Bakery Equipment Pty Ltd or its agents will not be liable.
Emergency Stop Button.
The machine is equipped with a red emergency stop button located centre of the control panel and allows the operator to stop the machine in case of emergency see Fig 1.2
Transport and Installation:
Transport
The instructions given in this section must be carefully followed when transporting the machine. This operation may include but is not limited to the following:
- Storage of the machine
- Installation of the machine
- The machine comes supplied in a secure packing crate which needs to be handled with care to protect the
- When being transported the machine crate should be secure to the transporting veichcle using approved tie down straps to avoid the machine tipping
- The machine should not be placed on top of other items during
- When lifting the machine ensure all persons are at a safe
- The forklift operator is to hold the appropriate qualifications.
- Do not climb on or place body under machine crate when it is being lifted from the ground or transport veichcle.
- When lifting the machine crate ensure forks are spread to the maximum width of the crate and the crate is against the cradle of the forklift (Fig2.1).
Instruction Manual for Manual Fully-Automatic Bun Divider Rounder FA/BDR www.allaboutbakery.com.au 12
- Ensure transport crate and all protective packaging is removed.
- Carefully clean the machine using a damp clean cloth, removing dust on all surfaces.
- When the machine has been unpacked, check the condition of the machine. Any visible damage indicates that the machine has been dropped or hit by something during transport. This could lead to malfunctioning. If damage has occurred during transport it should be attributed to the carrier and International Bakery Equipment Pty Ltd or its agent should be informed immediately of the situation.
- Locate the divider in a level convenient position where the operation of the machine is safe and accessible and blot to the floor using the provided bolts.
- Before making the electrical connections check the specifications found in section 1.6 of this manual and ensure they match those of your electrical service.
- Make certain the electrical supply is correct and the correct breaker is in place to ensure protection from a short circuit.
- Ensure the three phase connection of the bun divider is correct and running in the right direction the direction of the arrow.
- A qualified person should correct electrical connection if required.
- Train all operators in the safe operation of this machine
Machine Operation:
Intended Operation
This machine has been designed and manufactured for the safe dividing and
rounding of dough’s automatically with the use of a hydraulic system. With a
dough range of 900g to 3600g divided into bread rolls then utilising an even
balanced pressure plate and the dividing blades to ensure an even pressure and
accurate dividing of the dough into 30 pieces of equal weight.
This machine has been designed and built to operate indoors.
Control Components
Location
|
Description
|
Operation Performed
---|---|---
a
|
Weight adjustment screw
|
Weight adjustment for the size of the dough piece
b|
Control panel
|
Control components of the machine
c
| On buttons| Start the dividing /rounding process by pressing these two
buttons at the same time.
d| Pressing time switch| Sets the desired pressing time
e| Power light| Will be lit when machine is turned on
f
|
Emergency stop button
|
When pressed it stops the machine completely.
g| Running light| Will be lit when machine is operating
h| Rounding time switch| Sets the desired rounding time.
i
| On / Off Switch| Turns the power on and off to the machine.
Dividing Rounding Operation
These operating procedures are to be used as a guide, as every bakeries dough
consistency is different.
These steps should be used to set up the FABDR to your specific product and by
keeping records of the settings it will assist in the day to day operation of
this machine, be aware though you may still need to fine tune the settings
that you record as your dough can changei.e. longer than normal bench rest, or
a slacker dough.
- Turn the power on using the on/off switch (i).
- Use the weight adjustment screw (a) to set pressure plate according to dough weight.
- Press dough piece out onto the dividing plate evenly to ½ of the outside circles and place into machine ensuring plate is flat and against back stops and pin is in the hole in the front of the plate.
- Set the desired pressing time using the pressing time switch (d).
- Set the desired rounding time using the rounding time switch (h).
- Push the two on buttons at the same time (c), if only one is pressed the machine will not
- If the dough pieces come out and are torn less rounding time is needed, if they are not formed into the bread rolls properly longer rounding time is needed.
1.3 Warranty Terms and Conditions
- Warranty becomes effective from date of
- Warranty claims may be made by telephone, letter, email or
However all verbal claims must be confirmed in writing. I.B.E. Pty Ltd Reserves the right to require return of all claimed defective parts.
- B.E. Pty Ltd will ship the part(s) in an expeditious manner as requested.
- Mechanical and Electrical parts are warranted for a period of 12 months from date of
- During the first 12 months, I.B.E. Pty Ltd will reimburse the Authorized Agent or Purchaser for the cost of reasonable labour during normal working hours, 8.00a.m. – 00p.m., to remove the failed part(s) and install the replacement(s). After 12 months all charges will be the Purchasers responsibility.
- After the initial 12 months warranty, any replacement parts are warranted for 3 months excluding
- This Warranty may not be changed or modified and is not subject to any other Warranty expressed or implied by any other Agent, Dealer or Distributor unless approved in writing by I.B.E. Pty Ltd in advance of any claim being filed. This Warranty gives you specific legal rights which vary from State to State.
Cleaning &Maintanance:
Cleaning
- Always turn power off at the wall and unplug machine prior to any cleaning or maintenance procedures to be carried out.
- Keeping the machine cleaned helps to maintain the efficient hassle free operation of the
- This machine should be cleaned at the end of every day, to prevent a build up of dough crumb and flour
- Remove excess flour dust with a soft brush.
- Using a plastic scraper remove any dough remnants from dividing
- Wipe over the entire machine with a damp cloth with a neutral detergent, (Harsh chemicals will damage the machine).
Machine Operation:
3.1 Intended Operation
This machine has been designed and manufactured for the safe dividing and
rounding of dough’s automatically with the use of a hydraulic system. With a
dough range of 900g to 3600g
divided into bread rolls then utilising an even balanced pressure plate and
the dividing blades to ensure an even pressure and accurate dividing of the
dough into 30 pieces of equal weight.
This machine has been designed and built to operate indoors.
Note:
Do not use water jets or hoses to clean this machine as excess water can damage the machine, and the safe operation of the electrical components.
Note:
ONLY paraffin or white oil can be used to lubricate the dividing blades.
The blades only need a very fine film of oil coating them and this can be done
at the end of the cleaning process at the end of production daily.
Maintenance
It is recommended that this machine should be serviced once every 12 months by
a qualified technician to maintain hassle free operation.
If in the event the machine does not operate correctly it is recommended that
you contact your supplier to ensure a qualified technician services the
machine for you.
It is not advisable to attempt any repairs without prior knowledge of the
mechanical or electrical systems used in the manufacture of this machine, use
only qualified technicians.
Note:
Any attempt to modify this machine in any way will result in the warranty
being voided.
Tampering with the mechanical or electrical systems in this machine will void
warranty.
Spare Parts List
No. | Description |
---|---|
101 | Support plate |
102 | Support spring block |
104 | Support stand |
105 | Arch fixed stand |
106 | Extension spring |
107 | Flour frame |
108 | Back hood |
109 | Front hood |
110 | Stop knife |
111 | Extension spring |
114 | Down |
119 | Hanger |
120 | Connector |
122 | Connected rod |
124 | U-Block |
126 | Cover plate |
127 | Knife stand |
129 | Neck screw |
133 | Main shaft |
135 | Extension spring |
136 | Setting stand plate |
137 | Fish shape moving block |
140 | Revolving outer stand |
141 | Plug |
142 | Rounding tray |
No. | Description |
--- | --- |
145 | Transmission belt wheel |
146 | Motor belt wheel |
147 | Nut for revolving stand |
148 | Moving sheet |
155 | Pendulum stand |
159 | Axel of leaver stand |
160 | Up/down moving rod |
167 | Ball plug |
173 | Screw |
174 | Knife |
175 | Extension spring screw |
180 | Axle |
181 | Frame |
182 | Cross frame |
183 | Leading axle centre |
185 | Down moving bearing stand |
186 | Down part of machine |
192 | Fixed plate |
194 | Screws |
196 | Fixed plug |
205 | Oil cover plate |
210 | Top hood |
310 | Sleeve |
313 | Bearing stand sleeve |
352 | Electric box cap |
Spare Parts List Continued
No. | Description |
---|---|
450 | Hydraulic cylinder/up |
455 | Hydraulic cylinder |
460 | Fixed plate |
468 | Stop plate |
469 | Fixed rod/up |
470 | Support plate |
471 | Oil box |
No. | Description |
--- | --- |
472 | Oil box cap |
M-1 | Motor |
BL-1 | belt |
B-1 | Bearing |
B-2 | Bearing button body |
B-3 | bearing |
Exploded Parts Drawing
Instruction Manual for Manual Fully-Automatic Bun Divider Rounder FA/BDR
Instruction Manual for Manual Fully-Automatic Bun Divider Rounder FA/BDR
Electrical Wiring Diagrams
Hydraulic Control System
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>