HEAVY SHELL PARE65 Metal Bluetooth Mechanical Keyboard User Manual

User Manual
PARE65 Metal Bluetooth Mechanical Keyboard

PARE65 Keyboard Basic Introduction

A. Number of keys: 67
B. Name of Bluetooth device:PARE65
C. VIA Driver Support: FN (Function Key) Customization, Individual Key Settings, RGB Lighting effects, etc.
D. Power supply BT:3.7V & USB: 5V;
E. Support MAC/WIN keyboard layout switching
F. Charging time: Around 4 hours; (about 4 hours from low power prompt to full charge) This product supports up to 5V charging voltage and 2A charging current. We are not responsible for any problems caused by improper charging.
G. Knob: Rotating to the left: Decrease Volume, and Right to Increase Volume. Pressing the Knob: Mute/Unmute
H.Charging port: USB Type-C

PARE65 Keyboard Overview

Multifuntional Light Indicator:

1. Bluetooth Indicator,Keyboard Mode Switching Indicator, Charging/Low Battery Indicator
2.  Caps indicator
3.  Charging/Wire Port: .`v USB Type-C
4.  Power/Mode Switch: ‘-‘ Wire/Wireless
   

Connection Method

1. Bluetooth Pairing Guide Keyboard can simutaniously connect up to 3 devices, and support on-the-fiy device switching by (F N+ Z/XfC) Press and Hold (F N+Z/X/C) for 3 seconds to enter bluetooth pairing mode. (ZIX/C Indicates the memory for 3 different devices) Short Press (FN + Z/X/C) to wake and pair with designated device
   1 Bluetooth channel (FN+C)
   2 Bluetooth channel (FN+X)
   3 Bluetooth channel (FN+Z)
   

2. Connect Cable Inserted USB as wired mode.

Keyboard Lighting Function Shortcuts

Factory Reset

1. Press and hold Space+backspace and turn on the power switch or plug in USB

System Switching

1. FN+M Switch to MAC OS keyboard layout
2. FN+N Switch to Windows Keyboard layout

Other Function Switching

Battery Status: Short Press FN + BackSpace in Bluetooth mode. The top row numeric keys 1 – 0 will be on for 5 seconds, Indicating the battery status of 10%-100% Restart reset: Shout press FN+RShift+R to manually reset the keyboard and restart. Win disable and enable: Gaming Mode – Disabling Win Key Short Press FN+ Left Win Key to Enable/Disable the Win Key. *The Indicator light will flash 5 times to indicate the change. Keyboard Rollover Mode: The default mode is Full-Key Rollover, but regular 6-Key Rollover mode can be activated by press and holding Space+N and pluging in USB cable.

Keyboard layout: Key Register Switching

Exchange LCtrl and Caps: Press and hold Space+LCtrl then plug in cable to switch/exchange the LCtrl & Caps key register Exchange Control and Caps: Press and hold Space+Caps then plug in cable to change the key register of CAPS key to CTRL or back to CAPS Exchange Backspace and I: Press and hold Space+\ then plug in cable to switch/exchange the BackSpace & key register

Function (Fn) Key Shortcuts

Charging Indicator Shortcuts

Charging indicator light:
When battery is below10% the red indicator light flashes quickly. A red light will stay on while charging.When full charged the green battery indicator will appear.
Caps indicador light:
In wired mode the indicator light turns white when uppercase is locked, and the light returns to normal after unlocking.

The VIA Software

1. There are 4 Sets of key layouts for the keyboard. When FN+W,the layer 0 and layer 1 are for the Mac system. When FN+N,the layer 0 and layer 1 are for the Mac system.
2. Please visit caniusevia.com to download the latest VIA software to remap the keys.
3. If the VIA software cannot recognize your keyboard,please reach out to our support to get the instruction. (VIA only recognized in keybaord USB mode )

Keyboard Building Guide

If you are building the keyboard for the first time,we highly recommend you watch the building tutorial video, then start building the keyboard yourself.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement， the device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>