Breezary 30005 48 Inch Ceiling Fan with Light User Manual

Breezary 30005 48 Inch Ceiling Fan with Light

Product Information

The 48 Inch Ceiling Fan with Light is a versatile and stylish addition to any room. It comes with a remote control for convenient operation and features a built-in LED light. The fan has a motor housing, three blades, and a lamp housing with a lampshade. It also includes a balancing kit for smooth and stable operation. The product is designed for installation on ceilings and comes with all the necessary hardware.

Product Usage Instructions

1. Before starting the installation, ensure that the product is not used with any variable (rheostat) wall control to reduce the risk of fire or injury.
2. Begin by removing the ceiling bracket:
   • Loosen the two screws.
   • Turn the ceiling bracket counterclockwise.
   • Turn the screw on the edge of the hanger tray to the L-shaped opening of the fan cover.
   • Lift the ceiling bracket.
3. Secure the ceiling bracket to the metal outlet box.
4. Lift the motor housing and hang it on the hook of the ceiling bracket.
5. Wire the fan according to the wiring diagram provided:
   • Connect the white wire from the ceiling to the white wire from the receiver.
   • Connect the black wire from the ceiling to the black wire from the receiver.
   • Connect the white wire from the receiver to the white wire from the fan.
   • Connect the blue wire from the receiver to the blue wire from the fan.
6. After wiring, insert the receiver into the motor housing.
7. Remove the motor housing from the hook and align it with the ceiling bracket hole on the suspension plate.
8. Push up and turn the motor housing clockwise to secure it.
9. Tighten the four screws to secure the motor housing.
10. Attach the blades to the motor housing using the blade screws and washers.
11. Repeat the previous step for each blade assembly.
12. Feed the wire through the center hole of the lamp housing.
13. Attach the lamp housing to the motor housing using screws.
14. Connect the plugs from the motor and LED light (L).
15. Install the lampshade to the lamp base by turning it clockwise to lock it into place.
16. Congratulations! The installation is now complete.
17. To use the remote control, follow these steps:
    • Open the battery cover on the hand-held remote and install two AAA batteries (not included).
    • If the emitter cannot control the fan, use the learning code matching mode between the emitter and receiver:
    • Turn on the power switch.
    • Press the SETUP key within 3 seconds.
    • The receiver will issue two sounds to indicate a successful pair code.
    • If pairing is not successful, turn off the power for a minute and repeat the above steps.
    • If the emitter still cannot control the receiver, check the battery switch for normal operation, correct the positive and negative orientation of the batteries, and ensure that the batteries are not empty.

Safety Information

READ AND SAVE THESE INSTRUCTIONS.

1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before you begin.

2. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70” and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.

3. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lbs (15.9 kg). Use only UL Listed outlet boxes marked” Acceptable for Fan Support of 35 lbs. (15.9 kg) or less.”

4. Do not place objects in the path of the blades.

5. To clean the fixture. tum off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.

6. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment grounding
   conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

7. All setscrews must be checked and retightened

where necessary before installation.

• WARNING: To reduce the risk of electrical shock or fire. not use this fan with any solid-state fan speed Lil control device. It will permanently damage the electronic circuitry.
• WARNING: To reduce the risk of fire or injury do not use this product in conjunction with any variable (rheostat) wall control.
• WARNING: To reduce the risk of personal injury, do not bend the blade brackets when installing the rackets balancing the blades, or cleaning the fan. Do not insert balancing the blades, or cleaning the fan. Do not insert
• WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support of 35 lbs. (15.9 Kg) or less• and use screws provided with the outlet box.
• WARNING: To avoid possible electrical shock, tum Lil the electricity off at the main fuse box before wiring.
• WARNING: To reduce the risk of electrical shock, this must be installed with an isolating wall control / switch.
• CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box.
• CAUTION: Please use carefully when working around or cleaning the fan to avoid injury or damage of fan.
• CAUTION: The fan must be mounted with a minimum of 7 ft (2.1 m) clearance from the trailing edge of the blades to the floor.
• ACAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Dimension Reference

Hardware Included

Hardware Package Quantity

• S1.Machine Screw 2
• S2.Washer 2
• S3.Wood Screw 4
• S4.Washer 4
• S5.Blade Screw 10
• S6.Washer 10
• S7.Wire Nut 3

Fan Parts Included

Item name  Quantity

1. Remote Control 1
2. Ceiling Bracket 1
3. Motor Housing 1
4. Lamp Housing 1
5. LED(in lamp housing) 1
6. Lampshade 1
7. Blade 3

Exploded View

Installation Instructions

1. Step 1 Remove the Ceiling Bracket

   •  Loosen the two screws
   • Turn the ceiling bracket counter clockwise, turn the screw on the edge of the hanger tray to the L-shaped opening of the fan cover, and lift the ceiling bracket.

2. Step2 INSTALL CEILING BRACKET
   WARNING: To Reduce The Risk Of Fire, Electric Shock, Or Personal Injury, Mount To UUCSA Listed Outlet Box Marked Acceptable for Fan Support And Use Mounting Screws Provided With The Outlet Box

   • Secure ceiling bracket to metal outlet box.

   • Lift the Motor housing and hang it on the hook of the ceiling bracket.

3. Step3 Wiring The Fan

   • Wiring according to the wiring diagram.
     NOTE: Once ground wires are connected, carefully tuck all wires and marottes into the metal box making sure that the wires are clear of the hemisphere and down rod when positioned in hemisphere and downrod when positioned in mounting bracket.

4. Step4 Installing Motor Housing

   • After wiring, put the Receiver into the motor housing.
   • Remove the motor housing from the hook and align it with the ceiling bracket hole on the suspension plate, push up and turn Clockwise.
   • Tighten the four screws.
     

5. Step5 Assembling The Blade

   • Place the blade into the blade slot in the motor housing
   • Use the blade screws and washers to fix the blades to
   • Repeat this step for each blade assembly.
     

6. Step6 Assembling The Lamp Housing

   • Feed the wire through the center hole of the lamp housing.
   • Attach the lamp housing to the motor with screws.
   • Connect the plugs from the motor and LED LIGHT (L) .
     

7. Step7 The Lampshade Installation

   • Install the lampshade to the lamp base by turning clockwise to lock it into place.
     

CONGRATULATIONS! YOU HAVE COMPLETED THE INSTALLATION

FUNCTION INSTRUCTION OF EMITTER

• Open battery cover on the hand-held remote and install battery, pair of AAA of emitter(1.5V) that are not included. and receiver.
• If the emitter can not control the fan, learning code matching mode is used between emitter

Turn on the power switch, press the” SETUP” key within 3 seconds, the receiver issued a “tick” two sounds, the pair code is successful. If not successful, turn off the power for a minute an repeat the above.

• When the emitter cannot control the receiver, please check the battery switch touching normally or not, correction of the positive and negative, full or empty of the power.
• When the emitter cannot control the receiver, please check is there any existence of similar remote controlled products nearby, then check whether they works, because remote controlled product with the same frequency will disturb each other.
• Please take out the battery from the emitter when leaving unused for long time.
• When installing the fan, the fan ceiling cover don’t press the antenna(or other wire), it is easy to breakdown the wire and short-circuited.

1. Main switch off fan and light
2. Fan forward rotating
3. Natural wind
4. Speed controller
5. Mach code/Turn off fan
6. Timer
7. Light switch on/off
8. Fan reversal rotating

Troubleshooting Guide

If you have difficulty operating your new ceiling fan it may be the result of incorrect assembly, installation, or wiring. IN some cases these installation errors may be mistaken for defects. If you experience any faults please check this troubleshooting guide.

| Problem| Suggested Remedy
---|---|---
1| If fan does not start.|

• Check the main and branch circuit fuses or breakers.
• Check the line wire connections to the fan and switch wire connections in the switch housing.
• Check the battery in the remote control.
• Ensure you are in the normal range of 10-20 feet.

2| If fan sounds noisy.|

• Ensure all motor housing screws are snug.
• Ensure the screws that attach the fan blade bracket to the motor hub are tight.
• Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing.
• Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time.
• If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight. Check that the light bulbs are also secure.
• Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling.
• Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.

3| If fan wobbles.|

• Check that all blades are screwed firmly into blade holders.
• Check that all blade holders are tightened securely to motor.
• Make sure that canopy and mounting bracket are tightened securely to ceiling junction box and junction box is mounted firmly to ceiling joist.
• Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades keeping measure within 1/8 in. Rotate the fan until the next blade is positioned for measurement. Repeat for each blade. If all blade levels are not equal you can adjust blade levels by the following procedure. To adjust a blade tip down insert a washer(not supplied)between the blade and blade holder at the screw closest to the motor. To adjust a blade tip up insert washer(not supplied)between the blade and blade holder at the two screws farthest from the motor.
• If blade wobble is still noticeable interchanging two adjacent (side by side)blades can redistribute the weight and possibly result in smoother operation.

4| If light does not work.|

• Check blue wire from fan to make sure it is connected to hot wire from the house.

• Check for loose or disconnected wires in fan switch housing.

• Check for loose or disconnected wires in light kit.

• Check for faulty light bulbs.
  CAUTION: Make sure main power is turned off before entering switch housing.

• If the fan light shuts off shortly after being switched on it may be due to excessive current demand. Turn off power to the fan and replace the light bulbs with lower wattage bulbs. Turn on power to the fan using the pull chain. wall switch. or remote control (whichever is installed on the particular fan).

Balancing Kit
The Balancing kit should only be used if there is an unacceptable amount of fan wobble after completing all the steps in your Owners Manual under “Attaching The Fan Blades.”

1. Turn the fan on and set the speed control setting to a speed at which the wobbles is the greatest.
2. Turn off the fan and allow it to a come to a complete stop. Select one blade and place the balance clip on it, halfway between the blade holder and the blade tip on the trailing edge of blade.
3. Turn the fan on. Note whether the wobble has increased or decreased. Turn the fan off, move the clip to another blade, and retest. Repeat this procedure on all blades noting the blade on which the greatest improvement is achieved.
4. Move the clip back to the blade that showed the greatest improvement. Move the clip inward and outward on this blade and operate the fan to find the position where the clip gives the greatest improvement.
5. Remove the clip and install a balancing weight to the top of blade along the center line near the point where the clip was positioned.
6. If the fan wobble problem has not been corrected you may wish to try to improve the balancing further by using the balancing clip and additional weights.

Customer Service: support@breezary.com

References

• Breezary Ceiling Fan - Online Ceiling Fan Store

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>