ACE GZ01 Wireless Car MP3 Player User Guide

June 12, 2024
ACE

ACE GZ01 Wireless Car MP3 Player

Features

  1. The device can detect car battery voltage.
  2. With build-in microphone, supports Bluetooth hands-free calls for safe phone calls.
  3. Support mobile phone A2DP function, after Bluetooth connection can directly play HD music.
  4. Build-in colorful atmosphere breathing light, can adjust different lighting mode.
  5. Support U-disk music playback, compatiable with a variety of music formats.
  6. Build-in USB & PD charging output.

Part Description

  1. USB Charging Port
  2. PD Output
  3. U Disk Reader
  4. LED Display
  5. Play/ Pause/ Answer/Hang Up/ Vol+/Vol6.Next/Frequency +
  6. Previous/Frequency -/ Light Mode
  7. Power Supply

Operation Instruction

  1. Start the car engine.

  2. Plug the device into the car cigarette lighter hole, the LED light on and display screen flash alternately.

  3. Turn on the Bluetooth of the mobile phone and search for the product BT name “GZ01”, then connect them successfully, there will be a voice prompt, the rhythm light and display are on after the pairing connection. The device has the memory function, it can be automatically connected after the device is turned on again. (Ensure the mobile phone Bluetooth is enabled.)

  4. Turn on the car FM radio, tune it to a blank frequency. Long press CH/ to enter the frequency modulation mode. After entering the LED will keep flashing. Adjust to an FM channel that matches your car’s FM channel. Long press to quickly adjust the frequency. If no operation within 5 seconds, the system will automatically confirm the exit.

Frequency Short press , long press for quick adjustment
Frequency+ Short press , long press for quick adjustment
Frequency Fast Adjustment Flip the roller

Music playback

When connected to Bluetooth, you can play music on your phone through Bluetooth wireless transmission to your car stereo.
You can control the music Play/Pause and Previous/Next song by operating the mobile phone or the device, can also play the music in the U disk. If USB and BT playing are on at the same time, the last audio source to access will play first. For example: U disk music is played when the USB is inserted last, the device will automatically switch back to the phone if there is a call or the alert ring tone coming

Play/Pause Short Press
Previous Song Short Press
Next Song Short Press
Vol+/- Flip the roller
Switch BT/U Disk Audio Double click roller

Make and Receive Calls

When the device is successfully connected, you can answer or make calls hands- free to keep you safe driving.

Answer/Hang up the call Short press
Reject the call Long press

The Colorful Rhythm Lights

This device comes with a colorful rhythm light , which can provide a variety of modes of atmosphere light. Long Press to switch between different modes, or choose to close.

Charging Function
This device with 3 interfaces. The one with music symbol can read U disk and play the music in it. The remaining ones are for charging

Parameter

BT Version: 5.3
Working Voltage: 12V-24V
Limit Voltage: 9-26V
USB-A Output: 5V 2.4A
PD Output: 5.0V 3.0A 15W 9.0V 2.77A 24.93W
PPS: 3.3-5.9V 3.0A 17.7W 3.3-11.0V 2.25A 24.75W
FM Frequency: 87.5-108.0MHz
BT Effective Distance: 10M

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals