GRIPBANK GB-WL3000 High Speed Wireless Charging MagSafe Power Bank Instruction Manual

GB-WL3000
Easytok Compatible

Please read an instruction manual carefully before using the product.

PARTS

A Mount
B Battery Remaining Indicator  Lamp
C Button Power
D Operation Status Indicator Lamp
E USB-C to USB-C Charging Terminal

PACKAGE COMPONENTS

Magnetic Wireless Power bank, USB-C to USB-C Cable (1M), Easy Tok,Manual (EasyTok purchase available separately too)

SPESIFICATION

The product appearance and specifications are subject to change without notice for performance enhancement.

HOE TO USE

Please fully charge the product before first time use. Please use a charger that has proper voltage for this product. (We recommend charging with a USB cable connected to the output 5V charging adapter.)
Please connect a USB cable to the C-type charging terminal at the bottom of a power bank. The battery level indicator lights up and the product charging starts.
(Charging Time: approx. lhour 30minutes, based on 5V 2A)
|**Depends on the usage (rated voltage, cable and etc.) and external environment (temperature, humidity and etc.), it may take longer than the standard charging time.

How To Charge Mobile Devices From The POWERBANK

1. Attach the provided mount to the back of smartphone which supports wireless charging function. (*Refer to the provided EasyTok instruction).
2. Place the Grip Bank on the mount and press the power button to start charging.
3. If wireless charging is stopped for some reason and you want to try charging again immediately, please press the power button once to start charging again.

When the Grip Bank is removed from the phone, it automatically powers off after 30 seconds.

SAFETY PRECAUTIONS

** Please read all the contents below for safety use.

• Please refrain from storing and using this product under high temperature and humid weather. It causes defects if the product touches water.
• When water or liquid enters this product, immediately turn off the power and dry it under dry place before using it.
• Do not impact or throw this product Repeated shocks can cause internal failure.
• Please make sure to store this product turned off, and avoid hot and humid environments when storing it for long term.
• Do not charge products that exceeds our suggested voltage.
• Avoid children to use this product.
• Avoid charging products on the flammable materials such as carpets, and recommend to disconnect the USB cable after charging completed.
• Please do not self disassembly, modification, or repair of this product. (*Warranty not possible for this case)
• This product contains batteries. Please discharge it according to the local government’s disposal policy.
• In case liquid comes out of the product and gets on your eyes, do not rub it, rinse it with clear water, and see a doctor.

BATTERIES DISPOSAL INSTRUCTIONS

• Do not throw away used batteries anywhere.
• When you dispose the battery, do not incinerate or throw it in the fire. (Explosion or fire may occur.)
• Please discharge batteries into recycling bins.
• As it may cause the heat due to short and etc., please completely discharge it then dispose the battery.

XU103065-23002A
R-R-Hgs-GB-WL3000
Designed by higgskorea
Manufactured by
Digiway Electronics

Made in China

FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Label & Label Location
Wireless Power Bank
MODEL : GB-WL3000
FCC ID : 2BA5M-GB-WL3000
Power source : DC 3.7 V (Battery)
Manufacturer : DIGIWAY ELECTRONICS CO., LTD
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>