SLID UP NMSU1600-02 Sliding Door Fitting Angle Pack Instruction Manual
- June 12, 2024
- SLID UP
Table of Contents
SLID UP NMSU1600-02 Sliding Door Fitting Angle Pack
Product Information
The product is the SLID’UP 1600, a sliding door system designed for assembly and installation. It comes with a set of instructions for assembly in multiple languages, including French, German, English, Spanish, and Polish. The product code is NMSU1600-02 A and the manual was last updated in April 2020.
Product Usage Instructions
- Assembly Instructions: To assemble the SLID’UP 1600, follow these steps:
- Take 2 pieces labeled as “1” and connect them together.
- Take the piece labeled as “H” and connect it to the assembled pieces from step a).
- Take 2 more pieces labeled as “1” and connect them to the assembled structure from step b).
- Take the piece labeled as “H” and attach it to the assembled pieces from step c).
- Take the piece labeled as “2” and attach it to the structure assembled so far.
- Take the piece labeled as “3” and attach it to the structure assembled so far.
- Mounting Instructions: To mount the SLID’UP 1600, follow these steps:
- Refer to the provided mounting instructions in the manual for detailed guidance.
- Additional Information: For any further assistance or troubleshooting, please visit our website at www.slidup.net.
INSTRUCTIONS FOR ASSEMBLY
- NMSU1600-02
- A 04-2020
- www.slidup.net.
References
Read User Manual Online (PDF format)
Loading......