SLID UP SLID’UP 1803 Interior Automatic Door Instruction Manual
- June 12, 2024
- SLID UP
Table of Contents
SLID UP SLID’UP 1803 Interior Automatic Door
Product Information
Brand | MANTION |
---|---|
Model | SLID’UP 1803 / SLID’UP 1805 |
Weight Capacity | 80 KG |
Type | Interior Automatic Door |
Power Supply (WIDOOR INSIDE) | 24V AC/DC 2.5A |
Power Supply (WIDOOR) | 230 V AC |
Product Usage Instructions
To assemble the product, follow the steps below:
Step 1: Installation
- a. L = O + 55 mm
- b. W = H -25 mm
- Face 1 – Tightening torque: 9 N.m
- L/2
Step 2: Mounting
- O + 105 (SUM300) / O + 220 (SUM200)
- d = 400 mm Max.
- 101
- 35
- a
- b
Step 3: Clamping
Serrage Anziehen Fitting Apriete
Step 4: Belt Assembly
The assembly of the belt necessarily has to be done in the following order:
- a
- F
- b
- c
- d
Step 5: Power Supply
The power supply requirements for the product are as follows:
- WIDOOR INSIDE: 24V DC +5% 2.5A
- WIDOOR: 230V AC
COMPOSITION
INSTALLATION REQUIREMENTS
- For indoor use only
- Do not install in humid places
- Installation must be performed by skilled personnel
REQUIRED TOOLS FOR ASSEMBLY
- Measuring tape
- Percussion drill (if needed)
- Spirit level
- Allen wrenches (3 and 4 mm)
DIMENSIONS (mm)
Min. nook for pushback side
- O + 200 mm (WIDOOR INSIDE)
- O + 220 mm (WIDOOR)
Min. nook for closing side
- O + 50 mm
Min. lintel
- 120 mm
Panel height
- H – 25 mm
Panel width
- L + 55 mm
Panel thickness
- 8 – 10 mm
Panel weight
- 80 Kg MAX
Power supply output current rate
- 24V AC/DC 2.5A (WIDOOR INSIDE)
- 230 V AC (WIDOOR)
SUM300
WARNING: the electronic board must be accessible for any further setting operation.
SUM200
INSTALLATION
Face 1
- The assembly of the belt necessarily has to be made with opened / or closed door.
NMSU1803-1805 A 01-2018 www.slidup.net.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>