Speakers 2.4GHz Waterproof Bluetooth Shower Speaker User Manual
- June 12, 2024
- Speakers
Table of Contents
WATERPROOF BLUETOOTH
SHOWER SPEAKER
USER MANUAL
Thank you for choosing our product. We hope you will enjoy it very much.
Safety Instructions
Read this manual carefully before putting the app lance into operation and keep this manual for future reference.
- Keep the device away from heat. direct sunlight and sharp edges.
- Keep the device away from naked flames
- Do not insert any metal object into the device Risk of short circuit!
To avoid a static charge, do not use the device in an extremely dry climate.
Do not repair the unit yourself but contact an authorised specialist.
Product Overview
Accessories Included
1 pc USB charging cable
Charge Integrated Battery
This Bluetooth speaker is powered by integrated rechargeable lithium battery. Charge the battery as follows:
- Insert the chagrining cable into the DC SV socket on the unit, Connect the USB plug into a PC or AC /DC adaptor. The LED indicator turns red and the battery is being charged.
- When the battery is fully charged, the red LED indicator goes out.
Pairing LLSPKB to mobile phone or other device
Activate the Bluetooth speaker’s pairing mode by when in power off mode, press
and hold the on/off button for about 6 seconds until the red LED and blue LED
are flashing alternatively. Now the speaker is ready for pairing.
Tips: Please make sure the speaker is in power off mode When trying to
activate the pairing mode.
- Turn on your mobile phone and activate the Bluetooth function.
- Search for Bluetooth devices. LLSPKB will show up.
- Pair your device with LLSPKB . If password is needed, type in”0000″, After LLSPKB is paired with your device, connect it to your device.
Tips: Once this speaker is paired and connected to your mobile phone,
next time when you switch on this speaker, it will connect to your mobile
phone automatically as long as the Bluetooth in your mobile phone is on
Button description
On/Off: To switch on or off the unit
Short press for the previous song, long press for turning down the volume.
Short press for the next song, long press for turning up the volume.
Phone: To pick up or hang up a phone call
Play/Pause the music
Notes & tips:
- You can press Phone button twice quickly to redial the last phone call
Troubleshooting
| Symptoms | Causes | Solutions |
|---|---|---|
| Can not switch the speaker on | Battery empty | Charge the battery |
| Unable to pair the speaker | Speaker is already switched on, and it is not in | |
| pairing mode. | Refer to the section of ” Pairing BTS-06 to mobile phone or |
other device”
Technical Specifications
| Bluetooth support: | 3.O+EDR |
|---|---|
| Range: | 10 meters |
| Transmitting frequency: | 2.4G Hz |
| Power supply: | DC5V/100-120rnA |
| Battery: | 3.7V 400mAh lithium |
| Charging time: | approx, 3 hours |
| Operating time: | approx., 6 hour |
| IP grade: | IPx4 |
| Unit weight: | approx. O.K. |
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>