AndyMark am-4734 BB Mecanum Wheel User Guide

AndyMark am-4734 BB Mecanum Wheel

Parts List

Roller Assembly

Step 1: Press one BB Wheel Bearing (am-3681) into either side of the 4in BB Mecanum Roller (am-3680).

Step 2: Insert one Brass Tube (am-3681) into either side of the 4in BB Mecanum Roller Assembly.

Note: The outer race of the bearing should be flush with the end of the roller.

Step 3: Repeat for each of the 12 rollers on the wheel.

Note: A 4-wheel drive Mecanum Chassis requires 2 left wheels and 2 right wheels.

Step 1: Locate two left or two right plates. Each wheel will use two of the same plates on either side.

Note: Left plates shown, use two of the same plates on each wheel.

Step 2: Place one 4in BB Mecanum Plate on either side of the 4in BB Mecanum Hub.

Note: Arrange plates with flanges bent in towards the hub.

Step 3: Place one Roller Assembly between a plate tab pair and loosely secure using one M3-0.5 X 45mm Socket Head Screw (am-1659) and one M3 Nylock Nut (am-1023).

Step 4: Repeat until all 12 rollers are in place. It is helpful to assemble rollers across from each other first to help hold the wheel together while assembling.

Step 5: Tighten all M3-0.5 X 45mm Socket Head Screws and M3 Nylock Nuts to lock all the wheel components in place.

Step 6: For a 4-wheel drive Mecanum Chassis, build two left wheels and two right wheels.

Need help with an AndyMark product? Contact us at [email protected] or (877)-868-4770.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>