CAZEBOO BAHIA 400L300 Lean-To Louvered Pergola Instruction Manual
- June 12, 2024
- CAZEBOO
Table of Contents
CAZEBOO BAHIA 400L300 Lean-To Louvered Pergola
Product Information
- Product Name: BAHIA 400L300
- Components: COM-000453 [x1], COM-000455 [x1], COM-000454 [x1], COM-000456 [x1]
- Size: 7/8H X 2
- Languages: English (EN), French (FR), German (DE), Spanish (ES), Portuguese (PT), Italian (IT), Dutch (NL), Polish (PL), Finnish (FI), Swedish (SE), Danish (DK)
- Inventory: Refer to the user manual for a detailed inventory list.
- Maintenance Tips: Refer to the user manual for maintenance tips.
Product Usage Instructions
- Before starting the installation, ensure compliance with local building permits or regulations.
- Prepare the installation area by ensuring you have the right tools, sufficient space, and a clean, dry place to assemble the pergola.
- Follow the step-by-step assembly instructions provided in the user manual.
- Take note of the tolerance for gaps between individual parts during assembly, as this is necessary for proper product realization.
- Exercise caution during difficult weather conditions and avoid being near or under the structure during rainy and stormy weather.
- After a major weather event, assess the overall condition of the structure before use.
- Remove fabrics from the roof during bad weather to prevent the accumulation of water, dead leaves, or objects that may contribute to deterioration.
- Avoid heat sources and lighting on or near the structure.
- Expect natural wear over time, including deterioration of colors, surface finishes, mechanical functions, and tightening of elements.
- Understand that UV exposure may cause discoloration of materials like textiles and paints.
BEFORE STARTING THE INSTALLATION
- Please read all the instructions in this manual before starting to install your Pergola
- Please check the contents of each box thanks to the parts list
- Do not discard cartons until the product is fully assembled
- Before purchasing or assembling this product, consult your local authorities regarding the installation of temporary structures.
Some jurisdictions may require building permits, or otherwise regulate installation and use.When you are ready to begin, make sure you have the right tools, plenty of space and a clean, dry place to assemble your pergola.
Inventory
INSTALLATION
Maintenance tips
Product
Properties
For outdoor use only. The frame is made of steel parts, a material renowned for its durability and strength. The roof is made of polyester. This is a synthetic fabric that provides very good strength and elasticity. This fabric also has the benefit of not wrinkling.
Assembly
- The manufacture and assembly of this product require that there is a gap between the individual parts.
- As a result, gaps of up to several millimeters are generally observed between the two components.
- This tolerance is necessary for the correct realization of the product and can be the cause of geometrical differences.
- This will not result in any loss of product functionality.
Precautions for use
We cannot guarantee the durability of the product during difficult weather conditions. It is suggested that you avoid being near or under the structure during rainy and stormy weather. Once a major weather event has passed, we recommend that you assess the overall condition of the structure before use. It is advisable to remove fabrics from the roof during bad weather: the accumulation of water, dead leaves or objects on the roof contributes to its deterioration. We advise against heat sources and lighting on or near the structure.
Maintenance
It is common for the product to show natural wear with time and use, resulting
in deterioration of the colors and surface finishes, mechanical functions, and
tightening of the elements.
UV exposure
It is normal for materials such as textiles and paints to become discolored by
UV light. Each ray of sunlight or moonlight creates a new variation in the
substance. Colors normally wear out due to exposure to the outside world.
Tightening
Your product needs regular maintenance to remain functional. Doing these
repairs yourself on a regular basis can improve the longevity of the product.
Remember to tighten the components regularly.
Regular maintenance
It is important to maintain your product properly so that it does not
deteriorate. A steel structure has the advantage that you don’t need to invest
in products or equipment that are too specific.
All you need is :
- A soft sponge ;
- A microfibre cloth;
- And a water jet.
After cleaning, rinse with clear water (you can use a jet if it is not high- pressure). Don’t forget to rinse the feet as well so that no dirt remains. Finally, you can finish your work by wiping the structure with a microfibre cloth to dry it and restore its brilliance.
- Do not use abrasive products or detergents (bleach, acetone, etc.) which could damage the steel.
- Do not use a hard bristle brush, which could also damage the structure.
- Do not use a high-pressure jet.
For the fabric, remove it from the frame, unfold it, and spread it out on the lawn or patio (avoid stony surfaces which could damage it). Brush or sweep the area to remove any accumulated dirtiness such as dust, leaves, etc. Use a soft sponge with warm soapy water to remove any stains and dirtiness that have remained. Finally, let the fabric dry completely. We recommend cleaning your fabric 3 to 4 times a year. To avoid the appearance of moisture and mold, we recommend that you store your fabric in a closed and dry place during the autumn and winter seasons.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>