nacon RIG 800 PRO HX Wireless Headset and Base Station User Guide
- June 12, 2024
- nacon
Table of Contents
nacon RIG 800 PRO HX Wireless Headset and Base Station
Product Information
The RIG 800 PRO HX is a high-performance wireless gaming headset designed for use with Xbox consoles, including Xbox Series X|S and Xbox One. It features a comfortable fit with three size options (S, M, L) and offers various audio settings for an immersive gaming experience. The headset has a built-in microphone with mic monitoring capability, allowing you to adjust the mic monitor level according to your preference. The product complies with safety regulations, including EU directive 2006/66/EC.
Charge Indication
The headset’s charge indication displays the battery level as a percentage and the remaining time for full charge. When fully charged, it shows 100%.
Power and Connection
To charge the headset, connect it to the charging base or use the provided charging cable. The charging base supports fast charging and can charge the headset to 100% in approximately 7 hours. To connect the headset to your Xbox console, slide the adapter forward and follow the instructions specific to your console model.
System Audio Settings
You can adjust the system audio settings of the headset by referring to your console’s user guide.
Disconnect and Mute
To disconnect the headset, press and slide the adapter backward. Do not pull it upward. To mute the microphone, press the designated button. The headset also features mic monitoring, allowing you to hear your own voice during gameplay. You can adjust the mic monitor level by short-pressing the button to toggle between low, medium, and high levels.
Product Usage Instructions
- Select the appropriate size (S, M, or L) for a comfortable fit of the headset.
- Charge the headset by connecting it to the charging base or using the provided charging cable. The charge indicator will display the battery level and the remaining time for full charge.
- Connect the headset to your Xbox console by sliding the adapter forward and following the instructions specific to your console model.
- To adjust the system audio settings, refer to your console’s user guide.
- To power on/off the headset, press the designated power button. To disconnect the headset, press and slide the adapter backward. Do not pull it upward.
- To mute/unmute the microphone, press the designated button. You can adjust the mic monitor level by short-pressing the button to toggle between low, medium, and high levels.
- Ensure that you do not listen at high volume levels for long periods to prevent hearing damage.
FIT
CHARGE
CHARGE INDICATION
CONNECT
To adjust system audio settings, check your console’s user guide
POWER
DISCONNECT
MUTE
MIC MONITORING
SOUND
Hearing damage statement
- High sound pressure
- Hearing damage risk
- Do not listen at hight volume levels for long periods
- Electrical parameters
RIG 800 PRO/Operating Current/Frequency Range for speaker
- Headset < 30mA 20Hz ~ 20kHz
- Dongle HS < 100mA 20Hz ~ 20kHz
- Dongle HD < 100mA 20Hz ~ 20kHz
- Charging base < 500mA 20Hz ~ 20kHz
EIRP: headset : <13dBm / dongle : <13dBm Hereby, Nacon declares that the radio
equipment type wireless controller/headset is in compliance with Directive
2014/53/EU. Frequency band: (2,402 ~ 2,480) GHz
©2O22 NACON – NACON and RIG are trademarks of NACON. Registered in the US and
others countries. All trademarks are the property of their respective owners.
100-1348-99.08.2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>