Shenzhen Yisuma Network Technology Co LTD KC-8236 Multifunctional Gamepad User Manual
- June 12, 2024
- Shenzhen Yisuma Network Technology Co LTD
Table of Contents
product description
KC-8236 2.4G gamepad is a multifunctional gamepad that supports PC,PS3,Android
TV and Android phone tablet ( a type-c adapter needed when connect with
Android mobile and tablet )
product description
Product parameters
| Battery capacity | 600MA | Working current | 520MA |
|---|---|---|---|
| Battery life | 8 hours | Working voltage | 3V |
Pair and connect
PC Connect PC
Plug the receiver into the USB port of the computer, dick HOME button when the
gamepad is off, the 4 LED indicators flash. Pairing successfully when the led
indicator stay on and the controller vibrate. The default mode is X-input
mode(LED1 LED2 stay on). Press the back+start button for two seconds to switch
to Dinput mode(LED1 LED4 stay on), press the back+start button for two seconds
again to switch to Android mode (LED3 LED4 stay on)
Connect to PS3 console
Connect the usb receiver with PlayStation3 console, click HOME button when the
gamepad is off, the 4 LED indicators flash. Pairing successfully when the led
indicator stay on and the controller vibrate.
Connect to Android phones and tablets
Connect the usb receiver with the OTG adapter and then plug the OTG adapter
into your mobile/tablet, click HOME button when the gamepad is off, the 4 LED
indicators flash. Pairing successfully when the led indicator stay on and the
controller vibrate.
Trubo and Auto Turbo Function Setting
- Click(first time) any button that you want to set with turbo function and Turbo button at the same time, TURBO set successfully when the LED indicator flash 1 time and controller vibrate 1 time.
- Click again that button which you want to set with turbo and Turbo button at the same time, AUTO TURBO set successfully when the LED indicator flash 1 time and controller vibrate 1 time.
- The 3rd time click that button which was set with Turbo function and Turbo button at the same time, to clear the Turbo function for single button, clear successfully when the LED indicator flash twice and controller vibrate twice.
- Clear Turbo function for all buttons: Click and hold Turbo button and Back button for above 2 seconds at the same time, clear successfully when the LED indicator flash twice and controller vibrate twice.
Trubo speed setting
Click and hold turbo button, right joystick up and down to adjust turbo level,
3 Levels available, 20 times/second/12 times/second/5 times/second. The
default setting is 12 times/second
FCC Caution.
(1)§ 15.19 Labelling requirements. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and (2) this device must
accept any interference received. including interference that may cause
undesired operation. § 15.21 Changes or modification warning Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. § 15.105 Information
to the user.
Note: This equipment has been tested and foetid to comply with the limits
for a Class B digital device. pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However. there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception. which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: -Reorient or relocate
the receiving antenna. -Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.