doorKNOX VDP304 4 Inch AHD Ready Video Door Entry Monitor User Guide

Video Door Entry Monitor – 4 Inch AHD Ready
**DoorKnox is a registered trademark of System Q Ltd
VDP304 – Quick Start Guide

**

The VDP304 has a stylish brushed aluminium & gloss black finish and quality build the DoorKnox is ideal for retail and commercial projects.
The menu interface has an updated modern design, showing coloured icons, making it easier to remember which menu option does what.*
Our touch button monitor provides control of the door entry camera and is available in a 4″

Full Instruction Manual

www.systemq.com/PDF/manual/xVDP304.pdf

Two door cameras and two door locks can be connected to the main monitor.
*The menu structure in the VDP304 does not match the latest VDP207 and VDP210 monitors, but they can be used in conjunction with each other.
DoorKnox Monitors from serial numbers VDP207 (HCA01001) & VDP210 (HCB00401) can be used along side the VDP304.

User Information

• Do not expose to moisture or high humidity conditions. This product is rated for internal use only.
• Take care when transporting, storing and installing the monitor
• Always use and conform to current standards to install and use these. The signal cables should be kept way from high voltage equipment. Damage to units by lightning or mains voltage surges is not covered under the product warranty.(BS EN 62676-1-1) (BS EN 62676-4) (BS8418)
• There are no user serviceable parts in the monitor and opening or attempting to repair the product will void the warranty.
•  Do not touch the connections with wet hands.
•  Wipe dirt away with a damp micro-fibrecloth.
• Do not install or use the monitor if the cables, casing, or the power supply is damaged.

Connections

Mounting

Mark the hole positions using the mounting bracket.
Drill the holes and install the wall plugs.
Secure the mounting plate and then slot the monitor onto the bracket, when the monitor clicks it is secured in place.

Controls

1. Power Indicator
2.  Indicator shows which camera is being displayed
3.  Transfer – Send call to other monitor(s) / Intercom
4.  Monitoring – Switch between camera inputs
5. Unlock – Sends command to unlock
6. Answer Intercom – Answer / End call / Return
7. Microphone
8. Settings – Enter / Up and down
9. Volume Control
10.  Micro SD card slot

Setting Monitor ID
Up to 4 DoorKnox monitors can be used; 1 main monitor and up to 3 auxiliary monitors.
The main monitor ID must be set to 1, and the auxiliary monitors ID from 2 up.

1. Press the Setting button on the side of the monitor to access the menu.
2.  Using the Setting button flick up / down to navigate to “Mode” in the menu, then press the Setting button.
3.  Navigate to “Device ID” then press Setting button, flick up / down to change the ID. See the Full Manual for more information on settings in the monitor.

All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non- performance of the equipment refered to.

Document ref: xVDP304
© 2023 System Q Ltd
This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated
WEE/CG0783SS collection point as defined by your local council.

References

• DoorKnox.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>