EKF VALENCIA Single-Key Double-Key Switch Instruction Manual

EKF VALENCIA Single-Key Double-Key Switch

Product Information The single-key / double-key switch is a product designed for installation in walls. It consists of a clamping frame, contact terminal clamps, a mechanism, and a key. The switch is used to control electrical circuits by turning the key.

Product Usage Instructions

1. To remove the key, use a flat screwdriver tip to hook and pull it out.
2. To detach the clamping frame, hook both sides of it by turns using a flat screwdriver tip.
3. Connect the wires to the contact terminal clamps and tighten the screws to secure them.
4. Install the mechanism into the hollow in the wall and firmly tighten the locking screws.
5. To assemble the product, follow the inverse order and firmly snap the clamping frame to the unit housing.
6. Finally, install the key. If the unit has an indication, ensure that the lens is located above the indicator light.

For further information or assistance, please refer to the complete user manual available at https://tm.by.

Installation directions

for single-key / double-key switch series «VALENCIA»

1. Remove the key by hooking with a flat screwdriver tip.

2. Detach the clamping frame by hooking its both sides by turns with a flat screwdriver tip.

3. Connect the wires to the contact terminal clamps, tighten the screws.
4. Install the mechanism into the hollow in the wall, tighten firmly the locking screws.

5. Assemble the product in inverse order, firmly snap the clamping frame to the unit housing.
6. Install the key. If the unit have an indication, make sure that the lens is located above the indicator light.

https://tm.by

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>