TITAN TSGA604 Floor to Ceiling Stability Pole Instruction Manual
- June 12, 2024
- Titan
Table of Contents
TITAN TSGA604 Floor to Ceiling Stability Pole
Product Information
The TITAN POLE ACCESSORY (TSGA604) is a product designed for installation and height extension of the Titan pole. It includes various components required for installation and maintenance.
Installation
Please follow the steps below for proper installation:
Step 1: Remove The Ceiling Assembly
Put on your safety glasses. Unfasten the bolt and nut on the top of the POLE
using the provided Hex Key and Wrench. Remove the Ceiling Assembly.
Step 2: Add The Ceiling Height Extender Tube(s)
Each Height Extending Tube includes a bolt and nut. Add the Height Extending
Tube(s) to the top of your Pole. Insert the bolt and nut in each and tighten.
Step 3: Re-Install The Ceiling Assembly
Insert the Ceiling Assembly Tube into the Top Height Extension Tube, add the
bolt and nut, and tighten.
Step 4: Pole Height Adjustment And Alignment
Caution: Do not overtighten the Titan pole as it can damage your
ceiling.
Slide the Cover Tube up out of your way while you are doing this step. You can adjust the height of the Titan pole by turning the Height Adjusting Screw at the bottom of the Pole until the Pole Assembly is touching your Ceiling. You can use the Adjusting Bar supplied in the Titan pole Kit to help you do this. Before you finally tighten the Pole check that it is perpendicular (90 degrees) to the floor using the Spirit Level supplied in your Pole Kit. When it is perpendicular and where you want it to be, tighten the Pole using the Adjustment Bar.
Step 5: Final Checks
Ensure the Titan pole is safe and secure by grasping the Pole mid-height
and push and pull vigorously. The Base or Ceiling Channel should not slide or
move if the Titan pole is tensioned correctly. If the Ceiling Channel or the
Base move or slip in anyway, increase tension on the pole by tightening the
Height Adjusting Screw. Double-check that the Pole is still perpendicular.
When the Titan pole is tight and secure, tighten the Bottom Locking Nut
against the bottom of the Pole using the Adjustment Bar. When the Titan pole
is tight and secure, tighten the Bottom Locking Nut against the bottom of the
Pole using the Adjustment Bar.
CEILING HEIGHTS for FLAT CEILINGS:
- 7’-9” to 8’-3” (235cm to 250cm) – NO HEIGHT EXTENSION TUBES Required.
- 8’-3” to 8’-9” (250cm to 265cm) – ONE 6 inch SHORT EXTENSION TUBE Required.
- 8’-9” to 9’-3” (265cm to 280cm) – ONE 12 inch LONG EXTENSION TUBE Required.
- 9’-3” to 9’-9” (280cm to 295cm) – ONE 6 inch SHORT and ONE 12 inch LONG EXTENSION TUBE Required.
- 9’-9” to 10’-3” (295cm to 310cm) – ALL THREE EXTENSION TUBES are Required.
Safety Information
IMPORTANT: If you are unsure that you can install this product correctly, hire a qualified professional. If you have any questions, please contact Customer Care.
KIT CONTENTS
For regular installations you will need a Step Ladder, Safety Glasses and other tools required are included in the Kit.
TOOLS
PRODUCT INFORMATION
The TSGA604 is protected with AlphaSan® technology, which provides lasting protection against microbial contamination to all Hart Mobility products, delivering unrivaled anti-microbial performance.
- The TSGA604 can be used with TSG600 & TSG610 Poles
Maintenance
Regular maintenance is important to ensure the proper functioning of the Titan pole. Follow these maintenance steps:
- Check that neither the Floor Base nor the Ceiling Disc has moved and that the Titan pole is still perpendicular (90 degrees) to the floor. If necessary, repeat Step 5 of the installation process.
- To clean your Titan pole, simply wipe with a clean cloth and any commercially available cleaning solution.
- The Titan pole can loosen with use. The Titan pole should be checked weekly.
- Check that neither the Floor Base nor the Ceiling Disc has moved and that the Titan pole is still perpendicular (90 degrees) to the floor.
- If necessary, repeat Step 5.
- To clean your Titan pole, simply wipe with a clean cloth and any commercially available cleaning solution.
Limited Warranty
The TITAN POLE ACCESSORY (TSGA604) is covered by a limited lifetime parts warranty provided by Hartmobility Inc. This warranty covers defects in design and workmanship. Hartmobility Inc. will correct any defects in parts or workmanship at no charge. The warranty does not cover product failure due to installation error, owner misuse, abuse, negligence, or normal wear and tear. Hartmobility Inc. product(s) are covered by a limited lifetime parts warranty. This warranty covers against defects in design and workmanship. Hartmobility Inc. will correct any defects in parts or workmanship at no charge. The warranty does not cover product failure due to installation error, owner misuse, abuse, negligence or normal wear and tear.
TITAN POLE ACCESSORY
TSGA604
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>