ADLER EUROPE AD 4085 Glass Mixing Mixer User Manual
- June 12, 2024
- ADLER EUROPE
Table of Contents
ADLER EUROPE AD 4085 Glass Mixing Mixer
Product Information
The product is a high-power device with a power rating of 1000W. It operates on a voltage of 220-240V~ and a frequency of 50/60Hz. The device is equipped with a built-in overheat protection fuse to ensure a long lifetime. It is recommended to use the device for 1 minute turned on followed by 3 minutes turned off. The device should always be used with the lid assembled on the jug.
Product Usage Instructions
- Always ensure that the lid (2) is assembled on the jug (3) before using the device.
- If the motor overheats, turn off the knob (7) to zero position, unplug the device, and wait for the motor to cool down.
- After the motor has cooled down, reconnect the device to the mains and it will be ready for use.
- For safe disposal, transfer cardboard packaging to waste paper and pour polyethylene bags (PE) into a plastic container.
- If the device is no longer in use, it should be returned to an appropriate storage point to prevent environmental hazards.
- If the device contains batteries, they should be removed and disposed of separately at a designated collection point.
SAFETY CONDITIONS
IMPORTANT INSTRUCTIONS ON SAFETY OF USE
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only for home use. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240 V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision.
- For additional protection, it is advisable to install a residual current device (RCD) in the electrical circuit with a rated residual current not exceeding 30 mA. A specialist electrician should be consulted in this matter.
- Do not insert fingers or any other objects into blender’s cup when the blender is on.
- In order to avoid injuries handle the blades carefully.
- Watch out for long hair, scarves, neckties hanging above the cup and operating components of device.
- For safety reasons use only original accessories and spare parts intended for particular blender type, available at authorised service center.
- Handle the blades with extreme care while disassembling accessories. The blades can cause cuts.
- Change the accessories only when the device is switched off. Disconnect the device from the power.
- Do not put any products other than food and liquids in the blender cup. Do not put hot products in the cup.
- The device is not suitable for whipping egg whites, kneading dough or grinding meat.
- Don’t use aggressive detergents to clean the housing, as it may remove the informational graphic symbols such as: scale, signs, safety marks, etc.
- Do not start the empty mixing cup, without product inside.
- MAXIMUM PERIOD OF CONTINUOUS BLENDER OPERATION IS 1 MINUTES. After 1 minutes of continuous operation stop the device and wait couple of minutes before restarting.
- Do not pour hot liquids (over 60 ° C) into the cup.
- If the blades become jammed, always unplug the power cord from the electrical outlet before removing the blockage.
- Do not move the device while it is working.
- Be careful when handling cutter blades, when emptying the bin and when cleaning.
- Always disconnect the blender from the power supply when it is left unattended and before assembling, disassembling or cleaning.
BEFORE FIRST USE
- Do not mix dry ingredients only, add some liquid. Never use boiling liquids nor run the device empty.
- Cut the food in 2×2 cm pieces to ensure all the quantity will be mixed in same stage at same time.
- Never remove the lid (2) of the jug (3) before the device has come to a complete stop.
- Do not treat the jug (3) as container for food storage, sterilization, freezing.
- Do not use the blender running more than 1 minute in one cycle.
- Never mix more then one and half liters of food – less for frothy liquids like milk shakes.
- Overfilling can block the operation. Please turn off the unit and pull out the plug from the power socket. Take some of the food out of the jug (3), then connect again to the mains. Device is ready for use.
REMARK: Always use the device while the lid (2) is assembled on the jug (3)!
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION AD4085 – Blender
- Measuring cup of lid
- Lid
- Jug
- Sealing ring
- Blade unit
- Motor housing
- Speed control knob
USAGE
Please the device on flat and dry surface.
- Fit the sealing ring (4) into the blade unit (5).
- Screw the jug (3) onto the blade unit (5).
- Put your ingredients into the jug (3).
- Put the measuring cup of lid (1) in the lid (2) inside.
- Place and twist the lid (2) onto the jug (3).
- Place the jug (3) into the motor housing (6) deeply and turn it clockwise until it stops.
- Select a speed by turning the speed control knob (7) to proper position:
- speed 1: max 16.000 rotations per minute; for lighter blending eg. pancake batters, milkshakes and scrambled eggs,
- speed 2: max 20.000 rotations per minute; for soups, sauces, pâtés and mayonnaise,
- Pulse (P) mode: to operate the motor in a start & stop action. The pulse mode operates the motor and keeps it running for as long as the knob (7) is kept by you at position P. Pulse mode allows you to control the texture of various foods eg. pâtés.
- position zero: the device is switch off.
OVERHEAT PROTECTION
he device is equipped into the built-in overheat protection fuse, it stops the device when the motor is overheated automatically to ensure long lifetime. If it happened, turn off the knob (7) to zero position, plug out the device, wait some time , to let the motor cool down, then connect the device again to the mains. Device is ready for use.
CLEANING AND MAINTENANCE
Make sure that the device is disconnected from the power.
- Empty the jug (3) before unscrewing it from the blade unit (5).
- Remove and wash the sealing ring (4).
- Don’t touch the sharp blades – brush them clean using hot soapy water, then rinse thoroughly under the tap. Don’t immerse the blade unit in water. Let the blade unit (5) to dry upside down, away from children.
- Clean the jug (3) with water and a few drops of dishwashing liquid. Rinse it under running water. Set aside to dry.
- Clean the motor housing (6) with moist cloth, and then wipe dry. Don’t immerse motor housing (6) in water or other liquids.
NOTICE: Do not wash any blender parts in dishwashers.
TECHNICAL DATA
-
Power: 1000W
Voltage: 220-240V~ 50/60Hz -
Recommended operation time: 1 minute turned on + 3 minutes turned off.
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags
(PE) into the plastic container Worn device should be returned to the
appropriate point storage because it is dangerous in the device ingredients
may pose a threat to the environment. The electrical device should be handed
over to limit
its reuse and use. If in the device there are batteries you have to take out
and give to the point stored separately.
OTHER PRODUCTS
If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.
Read User Manual Online (PDF format)
Loading......