IC REALTIME Orbit 360° WiFi Security Camera User Guide

June 12, 2024
IC REALTIME

IC REALTIME Orbit 360° WiFi Security Camera

About the Guide

  • This quick start guide is for reference only. Minor difference might be found in user interface.
  • All the design and software here are subject to change without prior written notice.
  • All trademarks & registered trademarks mentioned are the properties of their respective owners.
  • Please visit our website or contact your local service engineer for more information.
  • If there is any uncertainty or controversy, please refer to our final explanation.

Using IC Home

  • Step 1
    Scan the QR code or search “IC Realtime” in the Google Play or App Store to download and install IC Home.
    IC-REALTIME-Orbit-360°-WiFi-Security-Camera-1

  • Step 2
    Run the App, and then register a new account if you do not already have one.

  • Step 3
    Connect the camera to a power source.

  • Step 4
    The camera LED indicator will flash green when it is fully booted up.

  • Step 5
    With your mobile device connected to a 2.4 GHz WiFi band, add a camera by following the steps on the app.
    IC-REALTIME-Orbit-360°-WiFi-Security-Camera-2

Note:

  • Repeat step S for adding multiple cameras.
  • If camera fails to to add or the WiFi connection is changed. Reset the camera and repeat step S.

Camera Installation

Note: Make sure the mounting surface can hold at least lib.

  • Step 1 Use the guide to mark & drill holes for the drywall anchors.
  • Step 2 Attach the mounting plate by drilling the provided screws into the anchors from step 1.
  • Step 3 Attach the camera to the mounting plate.

What’s in the Box

IC-REALTIME-Orbit-360°-WiFi-Security-Camera-4

IC-REALTIME-Orbit-360°-WiFi-Security-Camera-5

Know your Orb

IC-REALTIME-Orbit-360°-WiFi-Security-Camera-6

IC-REALTIME-Orbit-360°-WiFi-Security-Camera-7

Note: Press & hold the reset button for 30s until you hear the audible prompt. The pattern of the LED indicator is included in the following table

Led Indicator Status : Device status


Off Red light on| Powered off/LED turned off Rebooting after reset Booting
Device malfunction
Green light flashing| Waiting for network/Hotspot Enabled
Green light on| Operating properly
Red light flashing| Network connection failed
Green and Red light|
flashing alternately| Firmware updating

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals