Meross MSL430HK Smart WiFi Table Lamp User Manual
- June 12, 2024
- Meross
Table of Contents
Meross MSL430HK Smart WiFi Table Lamp
Safety information
- It is recommended that this device is used indoors in a dry location only.
- Make sure the device is fully plugged in and kept out of reach of children for safety concerns.
- Please do not disassemble the device, otherwise, there may be product damage or security risks.
- Please contact the seller for replacement in the event of freight damages.
- This product should not be exposed to direct sunlight.
Installation Guide
-
Download the Meross app.
-
Connect power cable and power the device up.
-
Set up the device.
Connect your smartphone or tablet to a 2.4 GHz Wi-Fi network.
Make sure your smart device is covered by a strong Wi-Fi signal.
The smart device supports iOS 13/ iPadOS 13 and later. It is recommended that you upgrade your iOS or iPadOS to the latest version before pairing it with the smart device.
Launch the Meross opp and log in to your account, or if you are a new user, tap Sign up to create a new account.
Tap the”+” icon to select the type of smart device you want ta add, then you can just follow the setup wizard to finish the configuration.
Relocation of the smart device does not require additional operations provided that it remains on the same network with a strong Wi-Fi signal.
NOTE
- If this is not the first time you’ve added this smart device, you’ll have to reset it before going any further.
- As long as you finish the configuration, you’ll be able to manage the device in Apple Home opp.
- If the QR code does not work, please try to add the smart device in Apple Home opp.
- Find more at https://www.meross.com/support/
LED and Button Rules
How to Use
-
General Settings
Device name: Change device name.
User manual: Check user manual. -
Link Meross to Google Assistant or Amazon Alexa.
Set up the device in the Meross app and link it to the voice assistants.
Link to Amazon Alexa
Go to Account-> Amazon Alexa and allow Meross to link with Alexa.
Link to Google Assistant
Go to Account-> Google Assistant and follow the step-by-step instructions to
complete the linking process.
The example commands are as follows :
- -“Hey Siri, turn on the smart ambient light.”
- -“Hey Siri, set the smart ambient light to blue.”
- -“Hey Siri, dim the smart ambient light by 30%.”
The example commands are as follows:
- -“Alexa, turn on the smart ambient light.”
- -“Alexa, set the smart ambient light to blue.”
- -“Alexa, dim the smart ambient light by 30%.”
The example commands are as follows:
- -“Hey Google, brighten the smart ambient light.”
- -“Hey Google, set the smart ambient light to blue.”
- -“Hey Google, dim the smart ambient light by 30%.”
FAQ
At Meross, we strive to assure your satisfaction. Attached below is a non- exhaustive list of questions that users are most concerned about.
-
How do I reset my Meross Smart Ambient Light?
When the light is OFF, hold the button for 5 seconds, it will reset and enter Wi-Fi configuration mode. Note that a factory reset will erase all of your custom settings, and you’ll have to set it up again. -
What if I can’t control the smart device with the Meross app?
You can troubleshoot the following:
– Check if your home Wi-Fi is working properly.
– Make sure that you have disabled access control in your router and that the smart device is not blocked by the router’s firmware.
– Factory reset your smart device and try to add it again. -
How do I manage my Meross device in Apple Home App?
Your Meross smart device will be automatically added to the Apple Home app after you finish configuration in the Meross app. -
I can’t pair my device with HomeKit anyhow.
Please make sure your iOS is connecting to the 2.4GHz of your home Wi-Fi and you are having iOS 13 or above. Restarting your iOS will help due to some system cache issue.
To learn more, you can visit
https://www.meross.com/support/faqs to find solutions for more frequently
asked questions.
Warranty
Meross products are covered by a 12-month limited warranty from the date of purchase. Please visit https://www.meross.com/support/warranty for a detailed warranty policy and product registration.
Disclaimer
- The function of this smart device is tested under a typical circumstance described in our specifications. Meross does NOT guarantee that the smart device shall perform exactly the same as described under all circumstances.
- By using third-party services including but not limited to Amazon Alexa, Google Assistant, Apple HomeKit, and SmartThings, customers acknowledge that Meross shall not be held liable in any way for the data and private information collected by such parties. Meross’s total liability is limited to what is expressly covered in its Privacy Policy.
- Damages arising from ignorance of the SAFETY INFORMATION shall not be covered by Meross aftersales service, nor does Meross take any legal responsibility therefrom. Customers acknowledge their understanding of these articles clearly by reading this manual.
Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
FCC Compliance Information Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Port 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
SIMPLE DEVICE
SIMPLIFY YOUR LIFE
Email: suppart@merass.com
Website: www.merass.com
Frequently Asked Questions
Does this work with HomeKit adaptive lighting?
NO! As of 2022-05-02, it does not work with Homekit Adaptive lighting. Nor do the Meross bulbs.
Does this lamp work with Apple HomeKit?
Yes, this smart lamp work with Apple Homekit, Alexa, and Google Assistant.
No. I looked for this ramp feature in the HomeKit but didn’t find it.
How do i control if i buy 2 of these? how to set up wifi?
Use the app cited in the instructions, and when you set them up, you have the chance to name them. The same can apply to all smart lights/light bulbs.
Is the bulb replaceable in the lamp? If so can I use any smart bulb?
It's not replaceable. The lamp doesn't open
Is it flicker free/eye caring?
I have not noticed any flickering. When adjusting colors or brightness it quickly changes color (no slow fade) but doesn’t flicker.
How many hours is the light rated for?
I don't know how many hours this light is rated for. I Have only been using it for a couple of weeks. I have it programmed to come on for 6 hrs every night in the brightest setting. I have had no issues.
Is this free volt can use with 220V?
The light is powered off 12Vdc drawing a max of 0.5 amps. The included power adapter says it can take inputs from 100-240Vac.
Does the lamp keep the same color and brightness level that I set it to after I turn it off and back on?
Yes, it will keep it each time. So far I’ve only tested the red, blue, and cool white at around 50% but each time it came back to the same setting.
Does the timer work with rgb? will it return to the color i set?
Yes, it turns back on to whatever color was last being used.
Can I operate this light from my phone from a different state?
Yes, you can control the light remotely (as in not connected to the same WiFi network) from anywhere you have an Internet connection. I just switched my phone to cellular data and was able to control my light.
Video
Download this PDF Link:Meross MSL430HK Smart WiFi Table Lamp User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>